HOME PAGE | < Previous | Contents | Next >
Troubleshooting for Transport/Paper Feeding of the Machine
Cause verification | Problem Judgement |
Press the 4th switch from the right on the size switch of paper feed tray 2 when seen from the front of the machine (Done after detaching paper feed tray 2) | Parameter other than 00001110 |
Pull out paper feed tray 2 from the machine. | Parameter other than 00001111 |
Solution:
Reconnect the connector.
Replace the sensor.
Replace the Paper Transport IOB.
Replace the harness.
Replace the switch for the pick-up arm.
Replace the switch for the pick-up arm.
Replace the switch for the pick-up arm.
2nd Paper Feed Tray
Check the 2nd tray set sensor to see if there are any defects.
Check the 2nd tray set sensor to see if there are any defects.
Check the 2nd tray set sensor to see if there are any defects.
Does not shift to right door open status
Target Part/SP No.:Right Door Open/Close Switch / SP5-803-026 (Right Door Open/Close Sensor)
Cause verification | Problem Judgement |
Manually press the referenced switch (Done after opening the right door) | 1: Open |
Open the right door | 0: Close |
Solution:
Reconnect the connector.
Replace the sensor.
Replace the Paper Transport IOB.
Replace the harness.
Target Part/SP No.:Duplex Unit Open/Close Sensor / SP5-803-027 (Tray Full Exit Sensor)