HOME PAGE | < Previous | Contents | Next >
Troubleshooting for Transport/Paper Feeding of the Machine
Registration Sensor : Late Jam : Cause Code 017
Target Part/SP No.:Registration Sensor / SP5-803-001
Cause verification | Problem Judgement |
Execute an INPUT check when there is no paper at the position of the referenced sensor. | 0 :Paper detected |
Execute an INPUT check when there is paper at the position of the referenced sensor. | 1: Paper not detected |
Solution:
Clean the sensor.
Reconnect the connector.
Replace the sensor.
Replace the Paper Transport IOB.
Replace the harness.
Checking paper status, or 1st paper transport roller.
Check if extra thin paper or thick paper exceeding the supported paper thickness is being used. | Use a supported paper type. |
Check if the paper thickness and size are detected correctly. | Set the paper thickness and size to the correct value. |
Check if the paper feed tray is not stained with a lot of paper dust. | Clean the 1st transport roller. |
Fusing Entrance Sensor : Late Jam : Cause Code 018
Target Part/SP No.:Fusing Entrance Sensor / SP5-803-011
Cause verification | Problem Judgement |
Execute an INPUT check when there is no paper at the position of the referenced sensor. | 0 :Paper detected |
Troubleshooting for Transport/Paper Feeding of the Machine
Cause verification | Problem Judgement |
Execute an INPUT check when there is paper at the position of the referenced sensor. | 1: Paper not detected |
Troubleshooting
Troubleshooting
Troubleshooting
Solution:
Clean the sensor.
Reconnect the connector.
Replace the sensor.
Replace the Paper Transport IOB.
Replace the harness.
Target Part/SP No.: PCU Motor: Black / ITB Drive Motor / SP5-804-136 (Transfer Drum Motor K: Standard Speed)
Cause verification | Problem Judgement |
Turn the referenced motor OFF with OUTPUT check | Drive sound heard |
Turn the referenced motor ON with OUTPUT check | Drive sound not heard |
Solution:
Reconnect the connector.
Replace the motor.
Replace the Imaging IOB.
Replace the harness.
Checking paper jam, or paper transfer unit
Check if there is no double feeding. | Fan the paper. |
Check the edges of the discharge plate to see if it is deformed or broken. | Reattach or replace the discharge plate. |