Adjustment after Recovery Ricoh MP C2004 C2504 Service Manual

Troubleshooting

Adjustment after Recovery

After performing recovery on SC370, execute the following adjustment procedures.

1. Execute SP2-111-004 (Forced Line Position: Adj. Mode d).

2. Execute the following SPs and check the results:

 SP2-194-007 (Execution Result)

 SP2-194-010 (Error Result: C)

 SP2-194-011 (Error Result: M)

 SP2-194-012 (Error Result: Y) Execute result sample Factory default: 0

Success: 1

3. Execute SP3-011-001 (Manual ProCon :Exe).

4. Execute the following SPs and check the results.

 SP3-012-001 to 010 (Front)

 SP3-012-011 to 020 (Center)

 SP3-012-021 to 030 (Rear)

Execute result sample (In order of YMCK from left)

 Factory default:[00,00,00,00]

 Starting adjust:[99,99,99,99]

 Fail Vsg adjust(Y):[21,99,99,99]

 Error of Development gamma Max(C):[99,99,55,99]

 Succeed:[11,11,11,11]