HOME PAGE | < Previous | Contents | Next >
Value | Mode | Descriptions |
7 | Coverage Count (YMC) | Color Total Counter B&W Total Counter Color Coverage Counter 1 (YMC) Color Coverage Counter 2 (YMC) Color Coverage Counter 3 (YMC) |
Installation is now completed.
2.2.6 MOVING THE MACHINE
This section shows you how to manually move the machine from one floor to another floor. Before turning off the main power, make sure 100% is shown as available memory on the screen if the fax option is installed.
Turn off the main power.
Disconnect the power plug from the outlet.
Close all covers and paper trays, including the front cover and bypass tray.
Move the scanner carriage to the correct position [A] with SP4-806-001 (SSP), and reattach the scanner shipping locks with lock position [B].
Keep the machine level and carry it carefully, taking care not to jolt or tip it, and protect the machine from strong shocks.
When moving the machine, do not press against the ADF.
Remove the optional feed tray when lifting the main machine for moving it to another floor.
SP descriptions
SP4-806-001 (Scanner carriage storage operation) (SSP)
Moves the scanner carriage to the shipping lock position. Attach the scanner shipping locks and fix the scanner carriage after executing SP4-806-001.
Main Machine Installation
Installation
Installation
Installation
Do not push the center part of the rear cover. Do not hold the covers of the stabilizers.
Do not put hard pressure on the rear cover [A] when moving or picking up the machine as it is fragile. This also applies to the operation panel [C]. Hold part [B] when moving the machine.
Hold 4 corners on the bottom base when holding the machine with the optional paper feeding tray joined to the main machine. Do not hold any other parts.