HOME PAGE | < Previous | Contents | Next >
4.20.8 ADJUSTMENT BY CHANGING THE MACHINE’S PROFILE SETTING
You can change the printer’s profile setting by specifying a bit switch in SP mode.
By changing the profile setting, you can change the tone of all images printed by the machine’s printer function.
By changing the profile setting, you can make the tone (image gamut) of the printed image similar to that of another model. However, due to factors such as the image gamut difference between different models, individual differences, and ageing of components, you may not achieve exactly the same tone.
Procedure to Change the Profile Setting
1. Enter the printer SP mode.
2. Change the values of bit switches with the following SP numbers.
Desired tone (color gamut) | SP to change | Value to select |
2009 Spring model or those before it | SP1-001-002 | 00000001 [01H] |
2009 Autumn to 2011 Spring model | 00010000 [10H] | |
2011 Autumn model or later | 00000000 [00H] | |
Fuji Xerox product | SP1-001-001 | 10000000 [80H] |
3. Turn the machine’s power off and then back on.
The specified setting is applied.