HOME PAGE | < Previous | Contents | Next >
3. Check the erase margin A and B. Adjust them with SP2-103-001 to -015 if necessary.
Leading edge: 0.0 to 9.0 mm (default: 4.2 mm)
Side-to-side: 0.0 to 9.0 mm (default: 2.0 mm)
Trailing edge: 0.0 to 9.0 mm (default: 4.2 mm)
4.20.6 ADJUSTING THE TONE OF THE PRINTED IMAGE
If a customer wishes to have the tone of the printed image corrected, you can adjust it as follows. For details about the adjustment procedures, see the corresponding sections.
Adjustment Method | Outline |
Adjustment by Changing the Printer Driver Setting (page 4-221) | Perform this to adjust the tone for each print job. This can be adjusted by the user. |
Adjustment by Changing the Machine’s Profile Setting (page 4-228) | Perform this to make the tone similar to that of another model. Doing this changes the tone of all images printed by the machine’s printer function. |
Adjustment by Printer Gamma Correction (page 4-230) | Basically, we recommend the default setting. Doing this changes the tone of all images printed by the machine’s printer function. |