HOME PAGE | < Previous | Contents | Next >
Installing the Image Transfer Lock Unit
When installing the image transfer lock unit, release the ITB lock lever and follow the procedures below, taking care to avoid deformation of the pin inside the unit (circled in red below).
If the pin is deformed, the shutter on the waste toner recovery path may not open and waste toner may clog the cleaning unit.
1. Before installing, check that the lever on the image transfer lock unit is in the unlocked position.
Unlocked position:
2. Install the image transfer lock unit [A] so that the gear [B] on the image transfer unit side fits into the space in the image transfer lock unit circled in blue below.
Replacement and Adjustment
Replacement and Adjustment
Replacement and Adjustment
Image Transfer Unit
3. Return the ITB lock lever [A] to the locked position.
