HOME PAGE | < Previous | Contents | Next >
4.8.3 SP DESCRIPTIONS
SP2-110-005 (Writing Unit Adj. Transfer)
Execution flag to download adjustment values of laser unit to the main unit’s SP. Must be executed when replacing the laser unit or assembling the main unit.
SP2-119-001 to 003 (Skew Adjustment Display)
Displays the current skew correction value for each color.
SP2-109-003 (Test Pattern: Pattern Selection)
Selects the test pattern.
SP2-102-001 to -003 (Magnification Adjustment: Bk)
Adjusts main scan lower speed scale for BK. Value increase: image stretches.
Value decrease: image shrinks
CMY color scale will fit to standard BK speed after executing MUSIC; BK color will have a different scale in the image without executing MUSIC after this SP.
SP2-101-001 (Registration Correction: Color Main Dot: Bk)
Adjusts main scan registration for BK.
Value increase: image shifts to the right facing the paper. Value decrease: image shifts to the left facing the paper.
CMY colors are adjusted to the BK color position if MUSIC is done after this SP.
SP2-111-004 (Forced Line Position Adj. Mode d)
Executes the fine line position adjustment and rough line position adjustment.
SP2-194-007 (MUSIC Execution Result Execution Result)
Displays the result of MUSIC adjustment. 0: Success, 1: Failure
SP2-194-010 to 013 (MUSIC Execution Result: Error Result C, M, Y, K)
Displays the result code of MUSIC adjustment for each color.
Replacement and Adjustment
Replacement and Adjustment
Replacement and Adjustment
Laser Unit
Detection Result | Meaning |
0 | MUSIC not executed |
1 | Correction Succeeded: Sampling is conducted correctly and the correction is completed |
2 | Sampling Failed (When the MUSIC pattern failed to be detected) |
3 | Detection Patterns Lacking (When the number of lines detected is smaller than the fixed number) |
4 | The sampled data is beyond the correction range. (Calculated correction value is just out of range) |
5 | The sampled data is beyond the correction range. |