Forced Shutdown Ricoh MP C2004 C2504 Service Manual

Replacement and Adjustment

1. Take out the power cord after shutdown.

2. Press the power switch for a second to remove the residual charge inside the machine.

Forced Shutdown

In case normal shutdown does not complete for some reason, the machine has a forced shutdown function.

To make a forced shutdown, press and hold the main power switch for 6 seconds. In general, do not use the forced shutdown.

 Forced shutdown may damage the hard disk and memory, and can cause damage to the machine. Use a forced shutdown only if it is unavoidable.

4.2 BEFOREHAND

 Turn off the main power switch and disconnect the power cord.

 After replacing, make sure that all harnesses that were removed are connected up again and secured in their clamps.