PREPARATION BEFORE OPERATION CHECK Ricoh MP C2004 C2504 Service Manual

Preventive Maintenance

3.1.3 PREPARATION BEFORE OPERATION CHECK

1. Clean the exposure glasses (for DF and book scanning).

2. Enter the user tools mode.

3. Do the "Automatic Color Calibration (ACC)" for the copier mode & printer mode as follows:

 Print the ACC test pattern (User Tools > Maintenance > ACC > Start).

 Put the printout on the exposure glass.

 Put 10 sheets of white paper on the test chart. This ensures the precise ACC adjustment.

 Close the ARDF or the platen cover.

 Press "Start Scanning" on the LCD. Then, the machine starts the ACC.

4. Exit the User Tools mode, and then enter the SP mode.

5. Perform line adjustment.

SP2-111-004: Forced Line Position Adj. Mode d

The result can be checked with SP2-194-007 (MUSIC Execution Result Execution Result) (0: Success, 1: Failure).

Also, results for each color can be checked with SP2-194-010 to 013.

6. Exit the SP mode.

SP Descriptions

 SP2-194-007 (MUSIC Execution Result: Execution Result)

Displays the result code of MUSIC adjustment. 0: Success

1: Failure

 SP2-194-010 to 013 (MUSIC Execution Result: Error Result C,M, Y, K)

Displays the result code of MUSIC adjustment for each color. 0: Not done

1: Completed successfully 2: Cannot detect patterns

3: Fewer lines on the pattern than the target 4: Out of the adjustment range

5 to 9: Not used

3.1.4 OPERATION CHECK

Check if the sample image has been copied normally.

PM Parts Settings

Preventive Maintenance