HOME PAGE | < Previous | Contents | Next >
There are three menus of settings.
WIRELESS & NETWORKS
DEVICE
SYSTEM
WIRELESS & NETWORKS
Menu level | Description | ||
1st level | 2nd level | 3rd level | |
Wireless Direct Settings | Group Owner Mode | You can only view the setting. | |
Connection Password | You can only view the setting. | ||
DHCP Server IP Address | You can only view the setting. | ||
DHCP IP Address Range | You can only view the setting. | ||
Select Channel | You can only view the setting. | ||
PEER DEVICES | View and configure devices that can be connected. | ||
REMEMBERED GROUPS | Displays groups that have been previously connected. | ||
Bluetooth | ON/OFF | You can only view the setting. | |
Menu level | Description | ||
1st level | 2nd level | 3rd level | |
SEARCH FOR DEVICES | Scans for Bluetooth devices in the vicinity. | ||
(name of this device) | You can only view the setting. | ||
PAIRED DEVICES | View and configure paired devices. | ||
AVAILABLE DEVICES | View and configure available devices. | ||
Port Forwarding to Machine | Port Forwarding Settings | Port Forwarding Cinfig 1-20 | Requests sent to the wireless LAN unit of the Smart Operation Panel can be forwarded to the controller of the MFP. You can enable or disable ports to forward these requests. |
MTU Settings | PathMTU(Enable/Disable) | Enables/disables the PathMTU size set in [MTU Size]. When you change this setting, the control panel restarts. | |
MTU Size | Sets the size of PathMTU. Default: 1500. | ||