HOME PAGE | < Previous | Contents | Next >
Press [Logout] to log out from the control panel’s service mode.
You need to logout manually because the Auto Logout function does not work. Depending on the authentication settings of the MFP, the following screen is displayed after you log out.
Authentication settings | ||
Administrator authentication: OFF User authentication: OFF | Administrator authentication: ON User authentication: OFF | Administrator authentication: ON User authentication: ON |
Screen of the function selected in [Function Priority] | Screen of the function selected in [Function Priority] | [Home] screen |
When Entry to Service Mode Is Prohibited by the Administrator
The administrator of the MFP can prohibit entry into the control panel’s service mode by enabling [Service Mode Lock] in [System Settings].
When [Service Mode Lock] is enabled, the machine does not enter the service mode even if you enter the number combination for the control panel’s service mode. There will be no error messages or beeping sounds to indicate login failure.
The machine can enter the recovery mode even if [Service Mode Lock] is enabled.