HOME PAGE | < Previous | Contents | Next >
IEEE 802.11agn Interface Unit Type M19 (D3BR-01)
ASCII code.
Installation
Installation
Installation
When "WPA2" is selected, authentication settings and certificate installation settings are required.
8. Press "Wireless LAN Signal" to check the machine's radio wave status using the operation panel.
Press "Restore Factory Defaults" to initialize the wireless LAN settings.
2.27.4 SP MODE SETTINGS FOR IEEE 802.11 WIRELESS LAN
The following SP commands and UP modes can be set for IEEE 802.11
SP No. | Name | Function |
SP5-840-006 | Channel MAX | Sets the maximum range of the channel settings for the country. |
SP5-840-007 | Channel MIN | Sets the minimum range of the channels settings allowed for your country. |
SP5-840-008 | Transmission Speed | Sets the transmission speed. Auto, 54 Mbps, 48 Mbps, 36 Mbps, 24 Mbps, 18 Mbps, 12 Mbps, 9 Mbps, 6 Mbps, 11 Mbps, 5.5 Mbps, 2 Mbps, 1 Mbps (default: Auto). |
SP5-840-011 | WEP Key Select | Used to select the WEP key (Default: 00). |
UP mode | Name | Function |
SSID | Used to confirm the current SSID setting. | |
WEP Key | Used to confirm the current WEP key setting. | |
WEP Mode | Used to show the maximum length of the string that can be used for the WEP Key entry. | |
WPA2 Authent. Method | Used to confirm the current WPA authentication setting and preshared key. |