HOME PAGE | < Previous | Contents | Next >

2.2 CONTROLLING THE POWER SUPPLY‌‌‌‌

2.2.1 EXITING ENERGY SAVING MODES

Because this model of Smart Operation Panel has no hardware keys, the MFP exits from energy saving mode when the user does one of the following:

 Touches the display panel

 Lifts the ADF

 Sets an original in the ADF

2.2.2 SCREEN STARTUP MODE

Startup Modes

There are two screen startup modes. The factory default setting is Normal.

1. Normal

This is the standard startup mode. When the main power of the MFP is turned ON, the control panel starts up using less power compared to Quick mode.

2. Quick

By preparing for the next startup when the machine shuts down, the control panel starts up faster than in Normal mode.

Changing the Screen Startup Mode

Screen Startup Mode can be changed in Screen Features.

Select [Screen Features] > [SYSTEM] > [Screen Device Settings] > [Screen Startup Mode], and then select [Normal] or [Quick].

HOME PAGE |

< Previous | Contents | Next >