HOME PAGE | < Previous | Contents | Next >

Internal Finisher SR3130 (D690)

Shift eject mechanism

INTERNAL FINISHER SR3130 (D690)

INTERNAL FINISHER SR3130 (D690)

INTERNAL FINISHER SR3130 (D690)

As with straight eject, shift eject is also done by transporting the paper to a transport roller and an eject roller via an entrance roller.

In shift operation, a shift roller is moved from front to back during transport by the driver of a shift motor.

Shift roller operation timings are as follows:

 Shift operation: Paper rear edge passes entrance sensor

 Return to original position: Paper rear edge passes transport sensor The shift roller detects the home position by a Home Position sensor.

The shift roller motor operates CW/CCW, and shifts the paper from front to back. The home position is located at the back of the displacement range, and is detected by a Home Position sensor.

HOME PAGE |

< Previous | Contents | Next >