5009

[Add Display Language]

Adds language available in user choice. (Only the languages registered in the machine)

Refer to the displayed language list to set in the way showed below. List Number Assigned Bit Switch

No.1 to 8 BIT1 to 8 (SP5-009-201) No.9 to 16 BIT1 to 8 (SP5-009-202) No.17 to 24 BIT1 to 8 (SP5-009-203) No.25 to 32 BIT1 to 8 (SP5-009-204) No.33 to 40 BIT1 to 8 (SP5-009-205) No.41 to 48 BIT1 to 8 (SP5-009-206) No.49 to 56 BIT1 to 8 (SP5-009-207)

Example: To add American(No.3 in the list) or Czech (No.15) Turn Bit 3 of “SP5-009-201” 0 to 1 for American.

Turn Bit 7 of “SP5-009-202” 0 to 1 for Czech.

After setting, turn the main power switch off and on to make the setting valid.

5-009-201

1-8

*CTL

[1 to 255 / 0 / 1]

5-009-202

9-16

*CTL

[1 to 255 / 0 / 1]

5-009-203

17-24

*CTL

[1 to 255 / 0 / 1]

5-009-204

25-32

*CTL

[1 to 255 / 0 / 1]

5-009-205

33-40

*CTL

[1 to 255 / 0 / 1]

5-009-206

41-48

*CTL

[1 to 255 / 0 / 1]

5-009-207

49-56

*CTL

[1 to 255 / 0 / 1]

5024

[mm/inch Display Selection]

Display units (mm or inch) for custom paper sizes.

5-024-001

0:mm 1:inch

*CTL

[0 or 1 / 1(USA), 0(Others) / 1]

0: mm

1: inch

5045

[Accounting counter]

5-045-001

Counter Method

*CTL

[0 to 7 / 1 / step]

0: Developments

1: Prints

2: Coverage

7: Coverage (YMC)

5047

[Paper Display]

5-047-001

Backing Paper

*CTL

[0 or 1 / 0 / 1]

0: OFF

1: ON

5051

[TonerRefillDetectionDisplay]

5-051-001

-

*CTL

[0 or 1 / 0 / 1]

0: ON

1: OFF

5055

[Display IP Address]

5-055-001

-

*CTL

[0 or 1 / 0 / 1]

0: OFF

1: ON

5061

[Toner Remaining Icon Display Change]

5-061-001

-

*CTL

[0 or 1 / 0 / 1]

0: Not display

1: Display

5062

[Parts Replacement Alert Display]

5-062-002

#Photoconductor Unit (Black)

*CTL

[0 or 1 / 0 / 1]

0: Not display

1: Display

5-062-003

#Development unit: Bk

*CTL

[0 or 1 / 0 / 1]

0: Not display

1: Display

5-062-025

#Photoconductor Unit (Cyan)

*CTL

[0 or 1 / 0 / 1]

0: Not display

1: Display

5-062-026

#Development unit: C

*CTL

[0 or 1 / 0 / 1]

0: Not display

1: Display

5-062-048

#Photoconductor Unit (Magenta)

*CTL

[0 or 1 / 0 / 1]

0: Not display

1: Display

5-062-049

#Development unit: M

*CTL

[0 or 1 / 0 / 1]

0: Not display

1: Display

5-062-071

#Photoconductor Unit (Yellow)

*CTL

[0 or 1 / 0 / 1]

0: Not display

1: Display

5-062-072

#Development unit: Y

*CTL

[0 or 1 / 0 / 1]

0: Not display

1: Display

5-062-093

#Intermediate Transfer Unit

*CTL

[0 or 1 / 0 / 1]

0: Not display

1: Display

5-062-102

#ITB Cleaning Unit

*CTL

[0 or 1 / 0 / 1]

0: Not display

1: Display

5-062-109

#Paper Transfer Unit

*CTL

[0 or 1 / 0 / 1]

0: Not display

1: Display

5-062-115

#Fuser Unit

*CTL

[0 or 1 / 0 / 1]

0: Not display

1: Display

5-062-116

Fuser Unit: Belt

*CTL

[0 or 1 / 0 / 1]

0: Not display

1: Display

5-062-118

Fuser Unit: Pressure Roller

*CTL

[0 or 1 / 0 / 1]

0: Not display

1: Display

5-062-131

#Dust Filter

*CTL

[0 or 1 / 0 / 1]

0: Not display

1: Display

5-062-142

#Wast Toner bottle

*CTL

[0 or 1 / 0 / 1]

0: Not display

1: Display

5-062-206

#ADF Pick-up Roller

*CTL

[0 or 1 / 0 / 1]

0: Not display

1: Display

5-062-207

#ADF Paper Supply Belt

*CTL

[0 or 1 / 0 / 1]

0: Not display

1: Display

5-062-208

#ADF Separate Roller

*CTL

[0 or 1 / 0 / 1]

0: Not display

1: Display

5066

[PM Parts Display]

5-066-001

-

*CTL

[0 or 1 / 0 / 1]

0: Not display

1: Display

5067

[Part Replacement Operation Type]

5-067-002

#Photoconductor Unit (Black)

*CTL

[0 or 1 / 0 / 1]

0: Service

1: User

5-067-003

#Development unit: Bk

*CTL

[0 or 1 / 0 / 1]

0: Service

1: User

5-067-025

#Photoconductor Unit (Cyan)

*CTL

[0 or 1 / 0 / 1]

0: Service

1: User

5-067-026

#Development unit: C

*CTL

[0 or 1 / 0 / 1]

0: Service

1: User

5-067-048

#Photoconductor Unit (Magenta)

*CTL

[0 or 1 / 0 / 1]

0: Service

1: User

5-067-049

#Development unit: M

*CTL

[0 or 1 / 0 / 1]

0: Service

1: User

5-067-071

#Photoconductor Unit (Yellow)

*CTL

[0 or 1 / 0 / 1]

0: Service

1: User

5-067-072

#Development unit: Y

*CTL

[0 or 1 / 0 / 1]

0: Service

1: User

5-067-093

#Intermediate Transfer Unit

*CTL

[0 or 1 / 0 / 1]

0: Service

1: User

5-067-102

#ITB Cleaning Unit

*CTL

[0 or 1 / 0 / 1]

0: Service

1: User

5-067-109

#Paper Transfer Unit

*CTL

[0 or 1 / 0 / 1]

0: Service

1: User

5-067-115

#Fuser Unit

*CTL

[0 or 1 / 0 / 1]

0: Service

1: User

5-067-116

Fuser Unit: Belt

*CTL

[0 or 1 / 0 / 1]

0: Service

1: User

5-067-118

Fuser Unit: Pressure Roller

*CTL

[0 or 1 / 0 / 1]

0: Service

1: User

5-067-131

#Dust Filter

*CTL

[0 or 1 / 0 / 1]

0: Service

1: User

5-067-142

#Wast Toner bottle

*CTL

[0 or 1 / 0 / 1]

0: Service

1: User

5-067-206

#ADF Pick-up Roller

*CTL

[0 or 1 / 0 / 1]

0: Service

1: User

5-067-207

#ADF Paper Supply Belt

*CTL

[0 or 1 / 0 / 1]

0: Service

1: User

5-067-208

#ADF Separate Roller

*CTL

[0 or 1 / 0 / 1]

0: Service

1: User

5071

[Set Bypass Paper Size Display]

5-071-001

-

CTL

[0 or 1 / 0 / 1]

0: Off

1: On

5073

[Supply Part Replacement Opration Type]

5-073-001

Waste Tonner Bottle

*CTL

[0 or 1 / 0 / 1] 0:No Display 1:Display

5074

[Home Screen Login]

5-074-002

Login Setting

*CTL

[0 to 255 / 0 / 1]

5-074-050

Show Home Edit Menu

*CTL

[0 to 2 / 0 / 1]

5-074-091

Function Setting

*CTL

[0 to 2 / 0 / 1]

0: Function disable

1: SDK application

2: Legacy application (reserved)

5-074-092

Product ID

*CTL

[0x00 to 0xffff / - / 1]

5-074-093

Application Screen ID

*CTL

[0 to 255 / 0 / 1]

5075

[USB Keyboard]

5-075-003

Display setting

*CTL

[0 or 1 / 0 / 1]

0: Disable

1: Enable

5081

[ServiceSP Entery Code Setting]

DFU

5-081-001

ServiceSP Entery Code Setting

-

-

5083

[LED Light Switch Setting]

5-083-001

Toner Near End

*CTL

[0 or 1 / 0 / 1]

0: OFF

1: ON

5-083-002

Waste Toner Near End

*CTL

[0 or 1 / 0 / 1]

5102

[AutoDetect]

5-102-203

HumanDetectSetting

*CTL

[0 or 1 / 0 / 1]

5114

[Optional Counter I/F]

5-114-001

MF Key Card Extension

*CTL

[0 or 1 / 0 / 1]

0: Not installed

1: Installed (scanning accounting)

5118

[Disable Copying]

5-118-001

-

*CTL

[0 or 1 / 0 / 1]

0: Not disabled

1: Disabled

5120

[Mode Clear Opt. Counter Removal]

5-120-001

0:Yes 1:StandBy 2:No

*CTL

[0 to 2 / 0 / 1]

0: Yes (removed)

1: Standby (installed but not used) 2: No (not removed)

5121

[Counter Up Timing]

5-121-001

0:Feed 1:Exit

*CTL

[0 or 1 / 0 / 1]

0: Feed

1: Exit

5127

[APS Mode]

5-127-001

-

*CTL

[0 or 1 / 0 / 1]

0: Not disabled

1: Disabled

5148

[Size Detection Off]

5-148-002

Tray 1

*CTL

[0 or 1 / 0 / 1]

5150

[Length Setting]

5-150-001

Bypass(0:OFF 1:Long)

CTL

[0 or 1 / 0 / 1]

0: OFF

1: ON

5162

[App. Switch Method]

5-162-001

-

*CTL

[0 or 1 / 0 / 1] 0: Soft Key Set

1: Hard Key Set

5167

[Fax Printing Mode at Optional Counter Off]

5-167-001

-

*CTL

[0 or 1 / 0 / 1]

0: Automatic printing

1: No automatic printing

5169

[CE Login]

5-169-001

*CTL

[0 or 1 / 0 / 1]

0: Disabled

1: Enabled

5188

[Copy Nv Version]

5-188-001

-

*CTL

[- / - / -]

5191

[Mode Set]

5-191-001

Power Str Set

*CTL

[0 or 1 / 1 / 1]

0: OFF

1: ON

5193

[External Controller Info. Settings]

5-193-001

-

CTL

[0 to 10 / 0 / 1]

0: External Controller is not installed

1: EFI

2: Ratio

3: Egret

4: GJ

5:Creo

6: QX-100

7: Kurofune

8 to 10: Reserved

5195

[Limitless SW]

5-195-001

-

*CTL

[0 or 1 / 0 / 1]

0: Productivity Precede 1: Use paper up

5196

[Copier Vendor Mode]

5-196-001

90 deg. Rotation

CTL

[0 or 1 / 0 / 1]

5-196-002

Color and Tray Selection

CTL

[0 or 1 / 0 / 1]

5199

[Paper Exit After Staple End]

5-199-001

Staple(1:Without 2:After 0:Auto)

CTL

[0 to 2 / 0 / 1]

5-199-002

Saddle(1:Without 2:After 0:Auto)

CTL

[0 to 2 / 0 / 1]

5-199-003

Stapless(1:Without 2:After 0:Auto)

CTL

[0 to 2 / 0 / 1]

5212

[Page Numbering]

5-212-003

Duplex Printout Left/Right Position of Left/Right Facing

*CTL

[-10 to 10 / 0 / 0.01mm/step]

5-212-004

Duplex Printout Top/Bottom Position of Left/Right Facing

*CTL

[-10 to 10 / 0 / 0.01mm/step]

5-212-018

Duplex Printout Left/Right Position of Top/Bottom Facing

*CTL

[-10 to 10 / 0 / 0.01mm/step]

5-212-019

Duplex Printout Top/Bottom Position of Top/Bottom Facing

*CTL

[-10 to 10 / 0 / 0.01mm/step]

5227

[Page numbering]

5-227-201

Allow Page No. Entry

*CTL

[2 to 9 / 9 / 1]

5-227-202

Zero Surplus Stting

*CTL

[0 or 1 / 0 / 1] 0:OFF

1:ON

5302

[Set Time]

Adjusts the RTC (real time clock) time setting for the local time zone. Examples: For Japan (+9 GMT), enter 540 (9 hours x 60 min.)

DOM: +540 (Tokyo)

NA: -300 (New York) EU: + 60 (Paris) CH: +480 (Beijing)

TW: +480 (Taipei)

AS: +480 (Hong Kong)

5-302-002

Time Difference

*CTL

[-1440 to 1440 / - / 1min/step]

5305

[Auto Off Set]

5-305-101

Auto Off Limit Set

*CTL

[0 or 1 / 1 / 1]

5307

[Daylight Saving Time]

5-307-001

Setting

*CTL

[0 to 1 / - / 1]

0: Disabled

1: Enabled (Default)

1: NA and EUR

0: ASIA and others

Enables or disables the summer time mode.

 Make sure that both SP5-307-3 and -4 are correctly set. Otherwise, this SP is not activated even if this SP is set to "1".

5-307-003

Rule Set (Start)

*CTL

[0 to 0xffffffff / - / 1hex] (Default)

NA: 0x11100200 EUR: 0x10500100 ASIA: 0x03100000

Other: 0x00000000

Specifies the start setting for the summer time mode.

There are 8 digits in this SP. For months 1 to 9, the "0" cannot be input in the first digit, so the eight-digit setting for -2 or -3 becomes a seven-digit setting.

1st and 2nd digits: The month. [1 to 12] 3rd digit: The week of the month. [1 to 5]

4th digit: The day of the week. [0 to 6 = Sunday to Saturday] 5th and 6th digits: The hour. [00 to 23]

7th digit: The length of the advanced time. [0 to 9 / 1 hour ] 8th digit: The length of the advanced time. [0 to 5 / 10 minutes ]

 The digits are counted from the left.

 Make sure that SP5-307-1 is set to "1".

5-307-004

Rule Set (End)

*CTL

[0 to 0xffffffff / - / 1hex]

5401

[Access Control]

5-401-103

Default Document ACL

CTL

[0 to 3 / 0 / 1]

5-401-104

Authentication Time

CTL

[0 to 255 / 0 / 1sec/step]

5-401-162

Extend Certification Detail

CTL

[0 to 0xff / 0 / 1]

5-401-200

SDK1 UniqueID

CTL

[0 to 0xFFFFFFFF / 0 / 1]

5-401-201

SDK1 Certification Method

CTL

[0 to 0xFF / 0 / 1]

5-401-210

SDK2 UniqueID

CTL

[0 to 0xFFFFFFFF / 0 / 1]

5-401-211

SDK2 Certification Method

CTL

[0 to 0xFF / 0 / 1]

5-401-220

SDK3 UniqueID

CTL

[0 to 0xFFFFFFFF / 0 / 1]

5-401-221

SDK3 Certification Method

CTL

[0 to 0xFF / 0 / 1]

5-401-230

SDK Certification Device

*CTL

[0 to 7 / 0 / power of 2]

0-1: SDK authentication available 0-0: Disable all functions

1-1: SKB Display

1-0: Disable

2-1: Administrator login

2-0: Disable

3 to 7-0: Reserved (set “0” only)

5-401-240

Detail Option

*CTL

[0 to 7 / 0x00 / 0x01]

0: Logout confirm option

-1: ON, 0: OFF

2 to 1: Auto-logout timer(retry timer)

-11: 30sec, 10: 20sec, 01: 10sec, 00: 60sec

3: personal authority / Group authority and operation

-1: ON, 0: OFF

4: Skip password entry

-1: ON, 0: OFF

5: Set the display of the remaining Frequence

-1: ON, 0: OFF

6 to 7: Set the display time

-1: ON, 0: OFF

5402

[Access Control]

5-402-101

SDKJ1 Limit Setting

CTL

[0 to 0xff / 0 / 1]

5-402-102

SDKJ2 Limit Setting

CTL

[0 to 0xff / 0 / 1]

5-402-103

SDKJ3 Limit Setting

CTL

[0 to 0xff / 0 / 1]

5-402-104

SDKJ4 Limit Setting

CTL

[0 to 0xff / 0 / 1]

5-402-105

SDKJ5 Limit Setting

CTL

[0 to 0xff / 0 / 1]

5-402-106

SDKJ6 Limit Setting

CTL

[0 to 0xff / 0 / 1]

5-402-107

SDKJ7 Limit Setting

CTL

[0 to 0xff / 0 / 1]

5-402-108

SDKJ8 Limit Setting

CTL

[0 to 0xff / 0 / 1]

5-402-109

SDKJ9 Limit Setting

CTL

[0 to 0xff / 0 / 1]

5-402-110

SDKJ10 Limit Setting

CTL

[0 to 0xff / 0 / 1]

5-402-111

SDKJ11 Limit Setting

CTL

[0 to 0xff / 0 / 1]

5-402-112

SDKJ12 Limit Setting

CTL

[0 to 0xff / 0 / 1]

5-402-113

SDKJ13 Limit Setting

CTL

[0 to 0xff / 0 / 1]

5-402-114

SDKJ14 Limit Setting

CTL

[0 to 0xff / 0 / 1]

5-402-115

SDKJ15 Limit Setting

CTL

[0 to 0xff / 0 / 1]

5-402-116

SDKJ16 Limit Setting

CTL

[0 to 0xff / 0 / 1]

5-402-117

SDKJ17 Limit Setting

CTL

[0 to 0xff / 0 / 1]

5-402-118

SDKJ18 Limit Setting

CTL

[0 to 0xff / 0 / 1]

5-402-119

SDKJ19 Limit Setting

CTL

[0 to 0xff / 0 / 1]

5-402-120

SDKJ20 Limit Setting

CTL

[0 to 0xff / 0 / 1]

5-402-121

SDKJ21 Limit Setting

CTL

[0 to 0xff / 0 / 1]

5-402-122

SDKJ22 Limit Setting

CTL

[0 to 0xff / 0 / 1]

5-402-123

SDKJ23 Limit Setting

CTL

[0 to 0xff / 0 / 1]

5-402-124

SDKJ24 Limit Setting

CTL

[0 to 0xff / 0 / 1]

5-402-125

SDKJ25 Limit Setting

CTL

[0 to 0xff / 0 / 1]

5-402-126

SDKJ26 Limit Setting

CTL

[0 to 0xff / 0 / 1]

5-402-127

SDKJ27 Limit Setting

CTL

[0 to 0xff / 0 / 1]

5-402-128

SDKJ28 Limit Setting

CTL

[0 to 0xff / 0 / 1]

5-402-129

SDKJ29 Limit Setting

CTL

[0 to 0xff / 0 / 1]

5-402-130

SDKJ30 Limit Setting

CTL

[0 to 0xff / 0 / 1]

5-402-141

SDKJ1 ProductID

CTL

[0 to 0xffffffff / 0 / 1]

5-402-142

SDKJ2 ProductID

CTL

[0 to 0xffffffff / 0 / 1]

5-402-143

SDKJ3 ProductID

CTL

[0 to 0xffffffff / 0 / 1]

5-402-144

SDKJ4 ProductID

CTL

[0 to 0xffffffff / 0 / 1]

5-402-145

SDKJ5 ProductID

CTL

[0 to 0xffffffff / 0 / 1]

5-402-146

SDKJ6 ProductID

CTL

[0 to 0xffffffff / 0 / 1]

5-402-147

SDKJ7 ProductID

CTL

[0 to 0xffffffff / 0 / 1]

5-402-148

SDKJ8 ProductID

CTL

[0 to 0xffffffff / 0 / 1]

5-402-149

SDKJ9 ProductID

CTL

[0 to 0xffffffff / 0 / 1]

5-402-150

SDKJ10 ProductID

CTL

[0 to 0xffffffff / 0 / 1]

5-402-151

SDKJ11 ProductID

CTL

[0 to 0xffffffff / 0 / 1]

5-402-152

SDKJ12 ProductID

CTL

[0 to 0xffffffff / 0 / 1]

5-402-153

SDKJ13 ProductID

CTL

[0 to 0xffffffff / 0 / 1]

5-402-154

SDKJ14 ProductID

CTL

[0 to 0xffffffff / 0 / 1]

5-402-155

SDKJ15 ProductID

CTL

[0 to 0xffffffff / 0 / 1]

5-402-156

SDKJ16 ProductID

CTL

[0 to 0xffffffff / 0 / 1]

5-402-157

SDKJ17 ProductID

CTL

[0 to 0xffffffff / 0 / 1]

5-402-158

SDKJ18 ProductID

CTL

[0 to 0xffffffff / 0 / 1]

5-402-159

SDKJ19 ProductID

CTL

[0 to 0xffffffff / 0 / 1]

5-402-160

SDKJ20 ProductID

CTL

[0 to 0xffffffff / 0 / 1]

5-402-161

SDKJ21 ProductID

CTL

[0 to 0xffffffff / 0 / 1]

5-402-162

SDKJ22 ProductID

CTL

[0 to 0xffffffff / 0 / 1]

5-402-163

SDKJ23 ProductID

CTL

[0 to 0xffffffff / 0 / 1]

5-402-164

SDKJ24 ProductID

CTL

[0 to 0xffffffff / 0 / 1]

5-402-165

SDKJ25 ProductID

CTL

[0 to 0xffffffff / 0 / 1]

5-402-166

SDKJ26 ProductID

CTL

[0 to 0xffffffff / 0 / 1]

5-402-167

SDKJ27 ProductID

CTL

[0 to 0xffffffff / 0 / 1]

5-402-168

SDKJ28 ProductID

CTL

[0 to 0xffffffff / 0 / 1]

5-402-169

SDKJ29 ProductID

CTL

[0 to 0xffffffff / 0 / 1]

5-402-170

SDKJ30 ProductID

CTL

[0 to 0xffffffff / 0 / 1]

5404

[User Code Count Clear]

5-404-001

User Code Count Clear

*CTL

[- / - / -]

[Execute]

5-404-101

User Code Count Clear Permit Setting

*CTL

[0 or 1 / 0 / 1]

5411

[LDAP-Certification]

5-411-004

Easy Certification

*CTL

[0 or 1 / 1 / 1]

1: On

0: Off

5-411-005

Password Null Not Permit

*CTL

[0 or 1 / 0 / 1]

0: Password NULL not permitted. 1: Password NULL permitted.

5-411-006

Detail Option

*CTL

[0 or 1 / 0 / 1]

0: OFF

1: ON

5412

[Krb-Certification]

5-412-100

Encrypt Mode

CTL

[0 to 0xFF / 0x1F / 1]

5413

[Lockout Setting]

5-413-001

Lockout On/Off

*CTL

[0 or 1 / 0 / 1]

0: Off

1: On

5-413-002

Lockout Threshold

*CTL

[1 to 10 / 5 / 1]

5-413-003

Cancellation On/Off

*CTL

[0 or 1 / 0 / 1]

0: Off (no wait time, lockout not cancelled)

1: On (system waits, cancels lockout if correct user ID and password are entered.

5-413-004

Cancellation Time

*CTL

[1 to 9999 / 60 / 1min]

5414

[Access Mitigation]

5-414-001

Mitigation On/Off

*CTL

[0 or 1 / 0 / 1]

0: OFF

1: ON

5-414-002

Mitigation Time

*CTL

[0 to 60 / 15 / 1min/step]

5415

[Password Attack]

5-415-001

Permissible Number

*CTL

[0 to 100 / 30 /1attempt/step]

5-415-002

Detect Time

*CTL

[1 to 10 / 5 / 1sec/step]

5416

[Access Information]

5-416-001

Access User Max Num

*CTL

[50 to 200 / 200 / 1user/step]

5-416-002

Access Password Max Num

*CTL

[50 to 200 / 200 / 1password/step]

5-416-003

Monitor Interval

*CTL

[1 to 10 / 3 / 1sec/step]

5417

[Access Attack]

5-417-001

Access Permissible Number

*CTL

[0 to 500 / 100 / 1/step]

5-417-002

Attack Detect Time

*CTL

[10 to 30 / 10 / 1sec/step]

5-417-003

Productivity Fall Wait

*CTL

[0 to 9 / 3 / 1sec/step]

5-417-004

Attack Max Num

*CTL

[50 to 200 / 200 / 1attempt/step]

5420

[User Authentication]

5-420-001

Copy

*CTL

[0 to 1 / 0 / 1]

0: On

1: Off

5-420-002

Color Security Setting

*CTL

[0x00 to 0xFF / 0x00 / 1]

5-420-011

DocumentServer

*CTL

[0 or 1/ 0 / 1]

0: On

1: Off

5-420-021

Fax

*CTL

[0 or 1/ 0 / 1]

0: On

1: Off

5-420-031

Scanner

*CTL

[0 or 1/ 0 / 1]

0: On

1: Off

5-420-041

Printer

*CTL

[0 or 1/ 0 / 1]

0: On

1: Off

5-420-051

SDK1

*CTL

[0 or 1 / 0 / 1]

0: ON

1: OFF

5-420-061

SDK2

*CTL

5-420-071

SDK3

*CTL

5-420-081

Browser

*CTL

[0 or 1 / 0 / 1]

0: ON

1: OFF

5430

[Auth Dialog Message Change]

5-430-001

Message Change On/Off

CTL

[0 or 1 / 0 / 1]

5-430-002

Message Text Download

CTL

[- / - / -]

5-430-003

Message Text ID

CTL

[- / - / -]

5431

[External Auth User Preset]

5-431-010

Tag

CTL

[0 or 1 / 1 / 1]

5-431-011

Entry

CTL

[0 or 1 / 1 / 1]

5-431-012

Group

CTL

[0 or 1 / 1 / 1]

5-431-020

Mail

CTL

[0 or 1 / 1 / 1]

5-431-030

Fax

CTL

[0 or 1 / 1 / 1]

5-431-031

FaxSub

CTL

[0 or 1 / 1 / 1]

5-431-032

Folder

CTL

[0 or 1 / 1 / 1]

5-431-033

ProtectCode

CTL

[0 or 1 / 1 / 1]

5-431-034

SmtpAuth

CTL

[0 or 1 / 1 / 1]

5-431-035

LdapAuth

CTL

[0 or 1 / 1 / 1]

5-431-036

Smb Ftp Fldr Auth

CTL

[0 or 1 / 1 / 1]

5-431-037

AcntAcl

CTL

[0 or 1 / 1 / 1]

5-431-038

DocumentAcl

CTL

[0 or 1 / 1 / 1]

5-431-040

CertCrypt

CTL

[0 or 1 / 0 / 1]

5-431-050

UserLimitCount

CTL

[0 or 1 / 1 / 1]

5481

[Authentication Error Code]

5-481-001

System Log Disp

*CTL

[0 or 1 / 0 / 1]

0: Off

1: On

5-481-002

Panel Disp

*CTL

[0 or 1 / 0 / 1]

1: On

0: Off

5490

[MF KeyCard (Japan only)]

5-490-001

Job Permit Setting

*CTL

[0 to 1 / 0 / 1]

0: Disabled. Cancels operation without a user code.

1: Enabled. Allows operation without a user code.

5-490-002

Count Mode Setting

*CTL

-

5491

[Optional Counter]

5-491-001

Detail Option

*CTL

[0 to 0xff / 0 / 1]

5501

[PM Alarm]

5-501-001

PM Alarm Level

*CTL

[0 to 9999 / 0 / 1]

0: Alarm off

1 to 9999: Alarm goes off when Value (1 to 9999) x 1000 > PM counter

5504

[Jam Alarm]

5-504-001

-

*CTL

[0 to 3 / 3 / 1]

0: Z

1: L

2: M

3: H

5-504-002

Threshold

*CTL

[1 to 99 / 10 / 1]

5505

[Error Alarm]

5-505-001

Error Alarm

*CTL

[0 to 255 / * / 1 x102 sheets/step]

0: Alarm Off

* C2503 :20 / C2003:15

5-505-002

Threshold

*CTL

[1 to 99 / 5 / 1]

5507

[Supply/CC Alarm]

5-507-001

Paper Supply Alarm

*CTL

[0 or 1 / 0 / 1]

0: OFF

1: ON

5-507-002

Staple Supply Alarm

*CTL

[0 or 1 / 0 / 1]

0: OFF

1: ON

5-507-003

Toner Supply Alarm

*CTL

[0 or 1 / 0 / 1]

0: OFF

1: ON

5-507-006

WasteTonerBottle

*CTL

[0 to 2 / 1 / 1] 0:OFF

1: Supply Call ON 2: CC Call ON

5-507-080

Toner Call Timing

*CTL

[0 or 1 / 0 / 1]

0: Toner bottle replacement 1: Less than toner threshold

5-507-080

Toner Call Timing

CTL

[0 or 1 / 0 / 1]

5-507-081

Toner Call Threshold:Bk

CTL

[10 to 90 / 10 / 10%/step]

5-507-082

Toner Call Threshold:CMY

CTL

[10 to 90 / 10 / 10%/step]

5-507-128

Interval :Others

*CTL

[250 to 10000 / 1000 /

1page/step]

5-507-132

Interval :A3

*CTL

[250 to 10000 / 1000 /

1page/step]

5-507-133

Interval :A4

*CTL

[250 to 10000 / 1000 /

1page/step]

5-507-134

Interval :A5

*CTL

[250 to 10000 / 1000 /

1page/step]

5-507-141

Interval :B4

*CTL

[250 to 10000 / 1000 /

1page/step]

5-507-142

Interval :B5

*CTL

[250 to 10000 / 1000 /

1page/step]

5-507-160

Interval :DLT

*CTL

[250 to 10000 / 1000 /

1page/step]

5-507-164

Interval: LG

*CTL

[250 to 10000 / 1000 /

1page/step]

5-507-166

Interval :LT

*CTL

[250 to 10000 / 1000 /

1page/step]

5-507-172

Interval :HLT

*CTL

[250 to 10000 / 1000 /

1page/step]

5508

[CC Call]

5-508-001

Jam Remains

*CTL

[0 or 1 / 1 / 1]

0: Disable

1: Enable

5-508-002

Continuous Jams

*CTL

[0 or 1 / 1 / 1]

0: Disable

1: Enable

5-508-003

Continuous Door Open

*CTL

[0 or 1 / 1 / 1]

0: Disable

1: Enable

5-508-011

Jam Detection: Time Length

*CTL

[3 to 30 / 10 / 1min/step]

5-508-012

Jam Detection: Continuous Count

*CTL

[2 to 10 / 5 / 1time/step]

5-508-013

Door Open: Time Length

*CTL

[3 to 30 / 10 / 1min/step]

5513

[PartsAlermlevelCount]

5-513-001

Normal

*CTL

[1 to 9999 / 300 / 1]

5-513-002

Df

*CTL

[1 to 9999 / 300 / 1]

5514

[PartsAlermlev]

5-514-001

Normal

*CTL

[0 or 1 / 1 / 1]

5-514-002

Df

*CTL

[0 or 1 / 0 / 1]

5515

[SC/Alarm Setting]

5-515-001

SC Call

*CTL

[0 or 1 / 1 / 1]

0: OFF

1: ON

5-515-002

Service Parts Near End Call

*CTL

5-515-003

Service Parts End Call

*CTL

5-515-004

User Call

*CTL

5-515-006

Communication Test Call

*CTL

5-515-007

Machine Information Notice

*CTL

5-515-008

Alarm Notice

*CTL

5-515-009

Non Genuine Tonner Ararm

*CTL

5-515-010

Supply Automatic Ordering Call

*CTL

5-515-011

Supply Management Report Call

*CTL

5-515-012

Jam/Door Open Call

*CTL

5-515-050

Timeout:Manual Call

*CTL

[1 to 255 / 5 / 1min/step]

5-515-051

Timeout:Other Call

*CTL

[1 to 255 / 10 / 1min/step]

5517

[Get Machine Information]

5-517-031

Get SMC Info: Retry Interval

*CTL

[10 to 255 / 10 / 1min/step]

5618

[Color Mode Display Selection]

5-618-001

-

*CTL

[0 or 1 / 1 / 1]

0: ACS, Color, Black & White, Two Colors, Single color

1: ACD, Full Color, Black & White

5728

[Network Setting]

5-728-001

NAT Machine Port1

CTL

[1 to 65535 / 49101 / 1]

5-728-002

NAT UI Port1

CTL

[1 to 65535 / 55101 / 1]

5-728-003

NAT Machine Port2

CTL

[1 to 65535 / 49102 / 1]

5-728-004

NAT UI Port2

CTL

[1 to 65535 / 55102 / 1]

5-728-005

NAT Machine Port3

CTL

[1 to 65535 / 49103 / 1]

5-728-006

NAT UI Port3

CTL

[1 to 65535 / 55103 / 1]

5-728-007

NAT Machine Port4

CTL

[1 to 65535 / 49104 / 1]

5-728-008

NAT UI Port4

CTL

[1 to 65535 / 55104 / 1]

5-728-009

NAT Machine Port5

CTL

[1 to 65535 / 49105 / 1]

5-728-010

NAT UI Port5

CTL

[1 to 65535 / 55105 / 1]

5-728-011

NAT Machine Port6

CTL

[1 to 65535 / 49106 / 1]

5-728-012

NAT UI Port6

CTL

[1 to 65535 / 55106 / 1]

5-728-013

NAT Machine Port7

CTL

[1 to 65535 / 49107 / 1]

5-728-014

NAT UI Port7

CTL

[1 to 65535 / 55107 / 1]

5-728-015

NAT Machine Port8

CTL

[1 to 65535 / 49108 / 1]

5-728-016

NAT UI Port8

CTL

[1 to 65535 / 55108 / 1]

5-728-017

NAT Machine Port9

CTL

[1 to 65535 / 49109 / 1]

5-728-018

NAT UI Port9

CTL

[1 to 65535 / 55109 / 1]

5-728-019

NAT Machine Port10

CTL

[1 to 65535 / 49110 / 1]

5-728-020

NAT UI Port10

CTL

[1 to 65535 / 55110 / 1]

5730

[Extended Function Setting]

5-730-001

JavaTM Platform setting

*CTL

[0 or 1 / 1 / -]

0: Disable, 1: Enable

5-730-010

Expiration Prior Alarm Set

*CTL

[0 to 999 / 20 / 1day/step]

5731

[Counter Effect]

This SP is used only for DOM machines.

5-731-001

Change MK1 Cnt (Paper->Combine)

*CTL

[0 or 1 / 0 / 1]

5732

[Reset Job After Jam(Copy)]

5-732-002

*CTL

[0 or 1 / 0 / 1]

5734

[PDF Setting]

5-734-001

PDF/A Fixed

*CTL

[0 or 1 / 0 / 1]

5741

[Node Authentication Timuout]

5-741-001

*CTL

[1 to 255 / 60 / 1sec/step]

5745

[DeemedPowerConsumption]

5-745-211

Controller Standby

*CTL

[0 to 9999 / 0 / 1]

5-745-212

STR

*CTL

[0 to 9999 / 0 / 1]

5-745-213

Main Power Off

*CTL

[0 to 9999 / 0 / 1]

5-745-214

Scanning and Printing

*CTL

[0 to 9999 / 0 / 1]

5-745-215

Printing

*CTL

[0 to 9999 / 0 / 1]

5-745-216

Scanning

*CTL

[0 to 9999 / 0 / 1]

5-745-217

Engine Standby

*CTL

[0 to 9999 / 0 / 1]

5-745-218

Low Power Consumption

*CTL

[0 to 9999 / 0 / 1]

5-745-219

Silent condition

*CTL

[0 to 9999 / 0 / 1]

5-745-220

Heater Off

*CTL

[0 to 9999 / 0 / 1]

5748

[OpePanel Setting]

5-748-101

Op Type Action Setting

CTL

[0x00 to 0xFF / 0 / 0x01]

 bit0

0: Normal operation panel 1: Smart operation panel

5-748-201

Cheetah Panel Connect Setting

CTL

[0 or 1 / 0 / 0]

0: OFF

1: ON

5749

[Import/Export]

5-749-001

Export

CTL

[- / - / -]

Target: System, Printer, Fax, Scanner Option: Unique, Secret

Copy config: Encryption, Encryption key(if selected)

[Execute]

5-749-101

Import

CTL

[- / - / -]

Option: Unique

Copy config: Encryption, Encryption key(if selected)

[Execute]

5751

[Key Event Encryption Setting]

5-751-001

Password

CTL

[0 to 255 / 0 / 1]

5752

[Copy:WebAPI Setting]

5-752-001

Copy FlairAPI Setting

*CTL

* see BitSwitch below:

Bit

Setting

meanings

Description

0

1

bit 0

Start of FlairAPI Server

Off (Do not Start)

On (Start)

Sets whether to start exclusive FlairAPI http server. If it is 0, scanning FlairAPI function and simple UI function will be disabled. The machine installed Android operating panel option, set “1”, others set “0”.

bit 1

Access permission of FlairAPI from outside of the machine

Disabled

Enabled

If it is “0”, accessing is limited from the machine only, such as operating panel, SDK/J, MFP browsers etc... If it is “1”, accessing is allowed from outside of FlairAPI such as PC, Remote UI, IT-Box etc...

bit 2

Reserved

-

-

-

bit 3

Reserved

-

-

-

bit 4

Simple UI Function

Disabled

Enabled

If it is “1”, the machine can be used Scanner Simple UI. If it is “0”, requesting URL of Simple UI returns “404 Not Found”

bit 5

Accessing permission of Simple UI from outside of the machine

Disabled

Enabled

If it is “0”, accessing is limited from the machine only (operating panel and MFP browser). If it is “1”, accessing is allowed from outside of Simple UI such as PC, mobile devices, and so on.

bit 6

Reserved

-

-

-

bit 7

Reserved

-

-

-

5755

[Display Setting]

5-755-001

Disp Administrator Password Change Scrn

CTL

[- / - / -]

5-755-002

Hide Administrator Password Change Scrn

CTL

[- / - / -]

5758

[RemoteUI Setting]

5-758-001

Authentication

*CTL

[0 or 1 / 0 / 1]

5759

[Machine Limit Count]

5-759-001

Machine Limit Count Setting

*CTL

[0 or 1 / 0 / 1]

5-759-061

Full Color Limit Count

*CTL

[0 to 99999999 / 0 / 1]

5-759-062

Mono Color Limit Count

*CTL

[0 to 99999999 / 0 / 1]

5801

[Memory Clear]

5-801-001

All Clear

CTL

[- / - / -]

[Execute]

5-801-003

SCS

CTL

[- / - / -]

[Execute]

5-801-004

IMH Memory Clr

CTL

[- / - / -]

[Execute]

5-801-005

Mcs

CTL

[- / - / -]

[Execute]

5-801-006

Copier Application

CTL

[- / - / -]

[Execute]

5-801-007

Fax Application

CTL

[- / - / -]

[Execute]

5-801-008

Printer Application

CTL

[- / - / -]

[Execute]

The following service settings:

 Bit switches

 Gamma settings (User & Service)

 Toner Limit

The following user settings:

 Tray Priority

 Menu Protect

 System Setting except for setting of Energy Saver

 I/F Setup (I/O Buffer and I/O Timeout)

 PCL Menu

5-801-009

Scanner Application

CTL

[- / - / -]

[Execute]

5-801-010

Web Service

CTL

[- / - / -]

[Execute]

5-801-011

NCS

CTL

[- / - / -]

[Execute]

5-801-012

R-Fax

CTL

[- / - / -]

[Execute]

5-801-014

Clear DCS Setting

CTL

[- / - / -]

[Execute]

5-801-015

Clear UCS Setting

CTL

[- / - / -]

[Execute]

5-801-016

MIRS Memory Clr

CTL

[- / - / -]

[Execute]

5-801-017

CCS

CTL

[- / - / -]

[Execute]

5-801-018

SRM Memory Clr

CTL

[- / - / -]

[Execute]

5-801-019

LCS Memory Clr

CTL

[- / - / -]

[Execute]

5-801-020

Web Uapli

CTL

[- / - / -]

[Execute]

5-801-021

ECS

CTL

[- / - / -]

[Execute]

5-801-023

AICS

CTL

[- / - / -]

[Execute]

5-801-025

Websys

CTL

[- / - / -]

[Execute]

5-801-026

PLN

CTL

[- / - / -]

[Execute]

5-801-027

SAS

CTL

[- / - / -]

[Execute]

5-801-028

Rest WebService

CTL

[- / - / -]

[Execute]

5812

[Service Tel. No. Setting]

5-812-001

Service

*CTL

[up to 20 / - / 1]

5-812-002

Facsimile

*CTL

[up to 20 / - / 1]

5-812-003

Supply

*CTL

[up to 20 / - / 1]

5-812-004

Operation

*CTL

[up to 20 / - / 1]

5-812-003

Supply

*CTL

[up to 20 / - / 1]

5-812-004

Operation

*CTL

[up to 20 / - / 1]

5-812-003

Supply

*CTL

[up to 20 / - / 1]

5-812-004

Operation

*CTL

[up to 20 / - / 1]

5816

[Remote Service]

5-816-001

I/F Setting

*CTL

[0 to 2 / 2 / 1]

0: Remote service off

1: CSS remote service on 2: NRS remote service on

5-816-002

CE Call

*CTL

[0 or 1 / 0 / 1]

0: Start of the service 1: End of the service

5-816-003

Function Flag

*CTL

[0 or 1 / 0 / 1]

0: Disabled

1: Enabled

5-816-007

SSL Disable

*CTL

[0 or 1 / 0 / 1]

0: Yes. SSL not used. 1: No. SSL used.

5-816-008

RCG Connect Timeout

*CTL

[1 to 90 / 30 / 1second/step]

5-816-009

RCG Write Timeout

*CTL

[0 to 100 / 60 / 1second/step]

5-816-010

RCG Read Timeout

*CTL

[0 to 100 / 60 / 1second/step]

5-816-011

Port 80 Enable

*CTL

[0 or 1 / 0 / 1]

0: No. Access denied 1: Yes. Access granted.

5-816-013

RFU Timing

*CTL

[0 or 1 / 1 / 1]

0: Any status of a target machine 1: Sleep or panel off mode only

5-816-014

RCG Error Cause

CTL

[0 or 1 / 0 / 1]

0: Initial state, normal condition 1: Error

5-816-021

RCG – C Registed

*CTL

[0 or 1 / 0 / 1]

0: Installation not completed 1: Installation completed

5816

[Remote Service]

5-816-001

I/F Setting

*CTL

[0 to 2 / 2 / 1]

0: Remote service off

1: CSS remote service on 2: NRS remote service on

5-816-002

CE Call

*CTL

[0 or 1 / 0 / 1]

0: Start of the service 1: End of the service

5-816-003

Function Flag

*CTL

[0 or 1 / 0 / 1]

0: Disabled

1: Enabled

5-816-007

SSL Disable

*CTL

[0 or 1 / 0 / 1]

0: Yes. SSL not used. 1: No. SSL used.

5-816-008

RCG Connect Timeout

*CTL

[1 to 90 / 30 / 1second/step]

5-816-009

RCG Write Timeout

*CTL

[0 to 100 / 60 / 1second/step]

5-816-010

RCG Read Timeout

*CTL

[0 to 100 / 60 / 1second/step]

5-816-011

Port 80 Enable

*CTL

[0 or 1 / 0 / 1]

0: No. Access denied 1: Yes. Access granted.

5-816-013

RFU Timing

*CTL

[0 or 1 / 1 / 1]

0: Any status of a target machine 1: Sleep or panel off mode only

5-816-014

RCG Error Cause

CTL

[0 or 1 / 0 / 1]

0: Initial state, normal condition 1: Error

5-816-021

RCG – C Registed

*CTL

[0 or 1 / 0 / 1]

0: Installation not completed 1: Installation completed

5816

[Remote Service]

5-816-001

I/F Setting

*CTL

[0 to 2 / 2 / 1]

0: Remote service off

1: CSS remote service on 2: NRS remote service on

5-816-002

CE Call

*CTL

[0 or 1 / 0 / 1]

0: Start of the service 1: End of the service

5-816-003

Function Flag

*CTL

[0 or 1 / 0 / 1]

0: Disabled

1: Enabled

5-816-007

SSL Disable

*CTL

[0 or 1 / 0 / 1]

0: Yes. SSL not used. 1: No. SSL used.

5-816-008

RCG Connect Timeout

*CTL

[1 to 90 / 30 / 1second/step]

5-816-009

RCG Write Timeout

*CTL

[0 to 100 / 60 / 1second/step]

5-816-010

RCG Read Timeout

*CTL

[0 to 100 / 60 / 1second/step]

5-816-011

Port 80 Enable

*CTL

[0 or 1 / 0 / 1]

0: No. Access denied 1: Yes. Access granted.

5-816-013

RFU Timing

*CTL

[0 or 1 / 1 / 1]

0: Any status of a target machine 1: Sleep or panel off mode only

5-816-014

RCG Error Cause

CTL

[0 or 1 / 0 / 1]

0: Initial state, normal condition 1: Error

5-816-021

RCG – C Registed

*CTL

[0 or 1 / 0 / 1]

0: Installation not completed 1: Installation completed

5-816-023

connect type(N/M)

*CTL

[0 or 1 / 0 / 1]

0: internet connection

1: Dial-up connection

5-816-061

Cert Expire Timing

*CTL

[0 to 0xffffffff / 0 / 1]

0: Not use

1: Use

5-816-062

Use Proxy

*CTL

[0 or 1 / 0 / 1]

0: Not use

1: Use

5-816-063

Proxy Host

*CTL

[- / - / -]

5-816-064

Proxy PortNumber

*CTL

[0 to 0xffff / 0 / 1]

5-816-065

Proxy User Name

*CTL

[up to 31 / - / 1]

5-816-066

Proxy Password

*CTL

[up to 31 / - / 1]

5-816-067

Proxy Password

*CTL

[0 to 255 / 0 / 1]

Displays status of the certification used for Cumin.

If it is not installed as Cumin, the value of this SP will be set when it installed, after checking the certification status.

0

The certification adequately set on the machine.

1

Request for certification update in progress.

2

Certification Update completed and notification of the success status to the G/W in progress.

3

Certification Update failed and notification of the result to the G/W in progress.

4

Certification expiration date will be coming soon. Notifying the G/W to request for certification update.

11

Rescue certification setting for connecting to the rescue G/W in progress because update for rescue certification needed.

12

Setting for rescue certification has completed. Requesting to the rescue G/W for updating certification.

13

Notification for certification updating request has completed. Waiting for the certification update request from the rescue G/W.

14

Received the notification for certification updating request from the rescue G/W. Writing the certification.

15

Writing the certification has completed. Notifying the result of certification update to the G/W.

16

Writing the certification has failed. Notifying the result of certification update to the G/W.

17

Writing a rescue certification because received a certification error again after completed the certification update request from the G/W and noticed the result of certification update with the updated certification.

18

The writing operation mentioned in #17 has completed. Notifying the result of certification update to the rescue G/W.

5-816-068

CERT: Error

*CTL

[0 to 255 / 0 / 1]

Displays a number code that describes the reason for the request for update of the certification.

0

Normal. There is no request for certification update in progress.

1

Request for certification update in progress. The current certification has expired.

2

An SSL error notification has been issued. Issued after the certification has expired.

3

Notification of shift from a common authentication to an individual certification.

4

Notification of a common certification without ID2.

5

Notification that no certification was issued.

6

Notification that GW URL does not exist.

5-816-069

CERT: Up ID

*CTL

[- / - / -]

-

5-816-083

Firm Up Status

*CTL

[0 to 5 / 0 / 1]

0: Waiting for accepting firm update

1: Waiting for firm update start schedule

2: Waiting for user confirmation 3: In preparation for the machine firm update

4: processing the machine firm update

5: processing the closing operation of the machine firm update

5-816-085

Firm Up User Check

CTL

[- / - / -]

5-816-086

Firmware Size

CTL

[- / - / -]

5-816-087

CERT:Macro Ver.

CTL

[8digits / - / 1digit/step]

5-816-088

CERT:PAC Ver.

CTL

[16digits / - / 1digit/step]

5-816-089

CERT:ID2Code

CTL

[17digits / - / 1digit/step]

5-816-090

CERT:Subject

CTL

[17digits / - / 1digit/step]

5-816-091

CERT:Serial No.

CTL

[16digits / - / 1digit/step]

5-816-092

CERT:Issuer

CTL

[30digits / - / 1digit/step]

5-816-093

CERT:Valid Start

CTL

[10digits / - / 1digit/step]

5-816-094

CERT:Valid End

CTL

[10digits / - / 1digit/step]

5-816-102

CERT:Encrypt Level

*CTL

[1 to 2 / 1 / 1]

5-816-103

Client Communication Method

CTL

[0 to 3 / 0 / 1]

5-816-104

Client Communication Limit

CTL

[1 to 7 / 7 / 1]

5-816-115

Network Information Waiting timer

CTL

[5 to 255 / 5 / 1sec/step]

5-816-150

Selection Country

CTL

[0 to 10 / 1 / 1]

0: Japan

1: USA

2: Canada

3: UK

4: Germany

5: France

6: Italy

7: Netherlands

8: Belgium

9: Luxembourg

10: Spain

Select the country where embedded RCG-M is installed in the machine. After selecting the country, you must also set the following SP codes for embedded RCG-M:

 SP5816-153

 SP5816-154

 SP5816-161

5-816-151

Line Type AutomaticJudgment

CTL

[- / - / -]

[Execute]

5-816-152

Line Type Judgment Result

CTL

[0 to 9 / - / 1]

Displays a number to show the result of the execution of SP5816 151. Here is a list of what the numbers mean.

0: Success

1: In progress (no result yet). Please wait. 2: Line abnormal

3: Cannot detect dial tone automatically 4: Line is disconnected

5: Insufficient electrical power supply 6: Line classification not supported

7: Error because fax transmission in progress – ioctl() occurred. 8: Other error occurred

9: Line classification still in progress. Please wait.

5-816-153

Selection Dial / Push

CTL

[0 or 1 / 0 / 1 ]

0: Tone Dialing Phone 1: Pulse Dialing Phone

Inside Japan "2" may also be displayed:

0: Tone Dialing Phone

1: Pulse Dialing Phone 10PPS 2: Pulse Dialing Phone 20PPS

5-816-154

Outside Line Outgoing Number

CTL

[- / - / -]

5-816-156

Dial Up User Name

CTL

[up to 32 / - / 1]

5-816-157

Dial Up Password

CTL

[up to 32 / - / 1]

5-816-161

Local Phone Number

CTL

[up to 24 / - / 1]

5-816-162

Connection Timing Adjustment Incoming

CTL

[0 to 24 / 1 / 1]

5-816-163

Access Point

CTL

[0 to 16 / 0 / 1]

5-816-164

Line Connecting

CTL

[0 to 1 / 0 / 1]

0: Sharing Fax

1: No Sharing Fax

5-816-173

Modem Serial No.

CTL

[- / - / -]

5-816-174

Retransmission Limit

CTL

[- / - / -]

5-816-187

FAX TX Priority

CTL

[0 or 1/ 0 / 1]

0: Disable

1: Enable

5-816-190

3G DongleID

CTL

[0 to 0 / 0 / 0]

5-816-199

ppp Connect Timer

CTL

[15 to 30 / 15 / 1min/step]

5-816-200

Manual Polling

CTL

[- / - / -]

[Execute]

5-816-201

Regist Status

CTL

[0 to 4 / 0 / 1] [Execute]

Displays the installation status as the target of NRS services.

0

Not installed as NRS machines or Cumin.

1

Installing as Cumin. Box enrollment has completed. Unable to response for the machine searching from Basil at this status.

2

Installation has completed. Unable to response for the machine searching from Basil at this status.

3

As a NRS machine, installation has completed. It cannot install as Cumin.

4

NRS modules is not being launched.

5-816-202

Letter Number

*CTL

[- / - / -]

5-816-203

Confirm Execute

*CTL

[- / - / -]

[Execute]

5-816-204

Confirm Result

CTL

[0 to 255 / 0 / 1]

0: Success Inquiry

1: Request number error

3: Communication error (Enabled Proxy)

4: Communication error (Disabled Proxy)

5: Proxy error (failed auth.) 6: Communication error

8: Other error (See SP5-816-208 for detail)

9: Processing inquiry 20: Failed Dial-up auth.

21: Failed answer tone detection 22: Failed career detection

23: Invalid modem value

24: Shortage of electrical current 25: Cable disconnected

26: Line occupied

Displays the result of SP5-816-203.

5-816-205

Confirm Place

CTL

[0 to 255 / 0 / 1]

0: Success registration 1: Request number error

3: Communication error (Enabled Proxy)

4: Communication error (Disabled Proxy)

5: Proxy error (failed auth.) 6: Communication error

8: Other error (See SP5-816-208 for detail)

9: Processing registration 20: Failed Dial-up auth.

21: Failed answer tone detection 22: Failed career detection

23: Invalid modem value

24: Shortage of electrical current 25: Cable disconnected

26: Line occupied

Displays the installed section informed from G/W for response of request number inquiry if the section is enrolled on the G/W.

5-816-206

Register Execute

CTL

[- / - / -]

[Execute]

Executes the registration of Cumin.

5-816-207

Register Result

CTL

[0 to 255 / 0 / 1]

Displays the registration result. Shows the executed status of SP5-816-206.

5-816-208

Error Code

CTL

[-2147483647 to 2147483647 / 0 /

-]

Displays the registration result of SP5-816-204.

5-816-208

Invalid modem parameter

-11001

Chat parameter error.

-11002

Chat execution error.

-11003

Unexpected error

-11004

Disconnect operation occurred during modem communication,

-11005

NCS reboot occurred during modem communication.

5-816-208

Errors with invalid procedure or settings

-12002

Attempted to inquiry or registration without obtaining the installation status.

-12003

Attempted to registrate without inquiry despite un-registered status.

-12004

Attempted to install with invalid certification, ID2, and without input the machine number.

-12005

Executed inquiry/ registration in a invalid Cumin function and prohibited @Remote communication.

5-816-208

-12006

Attempted to inquiry in BOX registration completed.

-12007

Registration attempted with the different request number from the number used for the last inquiry.

-12008

Certification update failed because Job processing etc.

-12009

Mismatched between ID2 in NR-RAM and ID2 in the individual certification.

-12010

Not initialized the certification area.

5-816-208

Error with error response from G/W

-2385

Inappropriate international dialing prefix

-2387

Not supported in the center.

-2389

DB failure

-2390

Program failure

-2391

Double registration of the machine

5-816-208

-2392

Parameter error

-2393

Not managed Basil

-2394

Not managed machine

-2395

Invalid BOX ID of Basil

-2396

Invalid Device ID of Basil

-2397

Different format of ID2 (includes invalid ID2)

-2398

Different format of request number

5-816-209

Instl Clear

CTL

[0 or 1 / 0 / 1]

5-816-240

CommErrorTime

CTL

[0 to 0 / 0 / 1]

5-816-241

CommErrorCode 1

CTL

[0 to 0xffffffff / 0x00000000 / 1]

5-816-242

CommErrorCode 2

CTL

[0 to 0xffffffff / 0x00000000 / 1]

5-816-243

CommErrorCode 3

CTL

[0 to 0xffffffff / 0x00000000 / 1]

5-816-244

CommErrorState 1

CTL

[0 to 0xffff / 0x0000 / 1]

5-816-245

CommErrorState 2

CTL

[0 to 0xffff / 0x0000 / 1]

5-816-246

CommErrorState 3

CTL

[0 to 0xffff / 0x0000 / 1]

5-816-247

SSL Error Count

CTL

[0 to 255 / 0 / 1]

5-816-248

Other Error Count

CTL

[0 to 255 / 0 / 1]

5-816-250

Commlog Print

CTL

[0 to 255 / 0 / 1]

5821

[Remote Service RCG Setting]

5-821-002

RCG IP Address

*CTL

[00000000h to FFFFFFFFh /

00000000h / 1]

5-821-003

RCG Port Number

*CTL

[0 to 65535 / 443 / 1]

5-821-004

RCG IPv4 URL Path

*CTL

[0 to 0 / 0 / 0]

5-821-005

RCG IPv6 Address

*CTL

[0 to 0 / 0 / 0]

5-821-006

RCG IPv6 URL Path

*CTL

[0 to 0 / 0 / 0]

5-821-007

RCG Host Name

*CTL

[0 to 0 / 0 / 0]

5-821-008

RCG Host URL Path

*CTL

[0 to 0 / 0 / 0]

5824

[NV-RAM Data Upload]

5-824-001

CTL

[- / - / -]

[Execute]

5-824-001

CTL

[- / - / -]

[Execute]

5-824-001

CTL

[- / - / -]

[Execute]

5825

[NV-RAM Data Download]

5-825-001

CTL

[- / - / -]

[Execute]

5825

[NV-RAM Data Download]

5-825-001

CTL

[- / - / -]

[Execute]

5825

[NV-RAM Data Download]

5-825-001

CTL

[- / - / -]

[Execute]

5828

[Network Setting]

5-828-039

User Class

CTL

[0 to 0 / 0 / 0]

5-828-040

Class Id

CTL

[0 to 0 / 0 / 0]

5-828-050

1284 Compatibility (Centro)

*CTL

[0 or 1 / 1 / 1]

0: Disabled

1: Enabled

5-828-052

ECP (Centro)

*CTL

[0 or 1 / 1 / 1]

0: Disabled

1: Enabled

Enables or disables ECP Compatibility.

5-828-065

Job Spooling

*CTL

[0 or 1 / 0 / 1]

0: Disabled

1: Enabled

5-828-066

Job Spooling Clear: Start Time

*CTL

[0 or 1 / 1 / 1]

0: ON (Data is cleared)

1: OFF (Automatically printed)

5-828-069

Job Spooling (Protocol)

*CTL

[0 or 1 / 0 / 1]

0: Validates

1: Invalidates bit0: LPR bit1: FTP bit2: IPP bit3: SMB

bit4: BMLinkS bit5: DIPRINT

bit6: sftp

bit7: (Reserved)

5-828-087

Protocol usage

* CTL

[0 or 1 / 0x00000000 / 1bit]

Shows which protocols have been used with the network. 0: Off (Not used the network with the protocol.)

1: On (Used the network with the protocol once or more.) bit0: IPsec, bit1: IPv6, bit2: IEEE 802. 1X, bit3:Wireless LAN, bit4: Security mode level setting, bit5:Appletalk, bit6: DHCP, bit7: DHCPv6, bit8: telnet, bit9: SSL, bit10: HTTPS,

bit11: BMLinkS printing, bit12: diprint printing, bit13: LPR printing, bit14: ftp printing, bit15: rsh printing, bit16: SMB printing,

bit17: WSD-Printer, bit18: WSD-Scanner, bit19: Scan to SMB, bit20: Scan to NCP, bit21: Reserve, bit22: Bluetooth,

bit23: IEEE 1284, bit24: USB printing, bit25: Dynamic DNS, bit26: Netware printing, bit27: LLTD, bit28: IPP printing, bit29: IPP printing (SSL), bit30: ssh, bit31: sftp

5-828-090

TELNET (0: OFF 1: ON)

* CTL

[0 or 1 / 1 / 1]

0: Disable

1: Enable

5-828-091

Web (0: OFF 1: ON)

* CTL

[0 or 1 / 1 / 1]

0: Disable

1: Enable

5-828-145

Active IPv6 Link Local Address

CTL

[- / - / -]

5-828-147

Active IPv6 Stateless Address 1

CTL

[000000000000000000000000000000000000h

to

5-828-149

Active IPv6 Stateless Address 2

CTL

FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF80h

/ 0000000000000000000000000000000040h /

-]

These SPs are the IPv6 status addresses (1 to

5) referenced on the Ethernet or wireless LAN (802.11b) in the format:

"Status Address" + "Prefix Length"

The IPv6 address consists of a total 128 bits configured in 8 blocks of 16 bits each.

5-828-151

Active IPv6 Stateless Address 3

CTL

5-828-153

Active IPv6 Stateless Address 4

CTL

[000000000000000000000000000000000000h

to FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF80h

/ 0000000000000000000000000000000040h /

-]

These SPs are the IPv6 status addresses (1 to

5) referenced on the Ethernet or wireless LAN (802.11b) in the format:

"Status Address" + "Prefix Length"

The IPv6 address consists of a total 128 bits configured in 8 blocks of 16 bits each.

5-828-155

Active IPv6 Stateless Address 5

CTL

5-828-156

IPv6 Manual Address

*CTL

5-828-158

IPv6 Gateway Address

*CTL

[00000000000000000000000000000000h to FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFh / 00000000000000000000000000000000h / -]

5-828-161

IPv6 Stateless Auto Setting

*CTL

[0 or 1 / 1 / 1]

0: Disable

1: Enable

5-828-219

IPsec Aggressive Mode Setting

CTL

[0 or 1 / 0 / 1]

5-828-236

Web Item visible

*CTL

[0x0000 to 0xffff / 0xffff / -]

Displays or does not display the Web system items. bit0: Net RICOH

bit1: Consumable Supplier bit2-15: Reserved (all)

5-828-237

Web shopping link visible

*CTL

[0 or 1 / 1 / 1]

0: Not display 1:Display

5-828-238

Web supplies Link visible

*CTL

[Up to 31char / URL1 / 1] 0: Not display

1: Display

5-828-239

Web Link1 Name

*CTL

[Up to 31char / URL1 / 1]

5-828-240

Web Link1 URL

*CTL

[Up to 127char / URL1 / 1]

5-828-241

Web Link1 visible

*CTL

[Up to 31 char / URL2/ -] 0: Not display

1: Display

5-828-242

Web Link2 Name

*CTL

[- / - / -]

5-828-243

Web Link2 URL

*CTL

[- / - / -]

5-828-244

Web Link2 visible

*CTL

[- / - / -]

5-828-249

DHCPv6 DUID

CTL

[- / - / -]

5832

[HDD]

5-832-001

HDD Formatting (ALL)

CTL

[- / - / -]

[Execute]

5-832-002

HDD Formatting (IMH)

CTL

[- / - / -]

[Execute]

5-832-003

HDD Formatting (Thumbnail)

CTL

[- / - / -]

[Execute]

5-832-004

HDD Formatting (Job Log)

CTL

[- / - / -]

[Execute]

5-832-005

HDD Formatting (Printer Fonts)

CTL

[- / - / -]

[Execute]

5-832-006

HDD Formatting (User Info1)

CTL

[- / - / -]

[Execute]

5-832-007

Mail RX Data

CTL

[- / - / -]

[Execute]

5-832-008

Mail TX Data

CTL

[- / - / -]

[Execute]

5-832-009

HDD Formatting (Data for a Design)

CTL

[- / - / -]

[Execute]

5-832-010

HDD Formatting (Log)

CTL

[- / - / -]

[Execute]

5-832-011

HDD Formatting (Ridoc I/F)

CTL

[- / - / -]

[Execute]

5-832-012

HDD Formatting (Thumbnail)

CTL

[- / - / -]

[Execute]

5836

[Capture Setting]

5-836-001

Capture Function (0:Off 1:On)

* CTL

[0 or 1 / 0 / 1]

0: Disable

1: Enable

5-836-011

Capture Setting: Copy

* CTL

[0 or 1 / 0 / 1]

5-836-012

Capture Setting: Doc. Svr.

* CTL

[0 or 1 / 0 / 1]

5-836-013

Capture Setting: Fax RX Printer

* CTL

[0 or 1 / 0 / 1]

5-836-014

Capture Setting: Fax TX

* CTL

[0 or 1 / 0 / 1]

5-836-015

Capture Setting: Printer

* CTL

[0 or 1 / 0 / 1]

5-836-016

Capture Setting: Scanner

* CTL

[0 or 1 / 0 / 1]

5-836-017

Capture Setting: SDK

* CTL

[0 or 1 / 0 / 1]

5-836-061

Captured File Resend (0:Off 1:On)

* CTL

[0 or 1 / 1 / 1]

5836

[Capture Setting]

5-836-071

Reduction for Copy Color

*CTL

[0 to 3 / 2 / 1]

0: 1to-1

1: 1/2

2: 1/3

3: 1/4

5-836-072

Reduction for Copy B&W Text

*CTL

[0 to 3, 6 / 0 / 1]

0: 1to-1

1: 1/2

2: 1/3

3: 1/4

6: 2/3

5-836-073

Reduction for Copy B&W

*CTL

[0 to 3, 6 / 0 / 1]

Other

0: 1to-1

1: 1/2

2: 1/3

3: 1/4

6: 2/3

5-836-074

Reduction for Printer Color

*CTL

[0 to 3 / 2 / 1]

0: 1to-1

1: 1/2

2: 1/3

3: 1/4

5-836-075

Reduction for Printer B&W

*CTL

[0 to 3, 6 / 0 / 1]

0: 1to-1

1: 1/2

2: 1/3

3: 1/4

6: 2/3

5-836-077

Reduction for Printer Color

*CTL

[1, 3 to 5 / 4 / 1]

1200dpi

1:1/2

3:1/4

4:1/6

5:1/8

5-836-078

Reduction for Printer B&W 1200dpi

*CTL

[0 to 5 / 1 / 1]

0: 1

1: 1/2

2: 1/3

3: 1/4

4: 1/6

5: 1/8

5-836-081

Format for Copy Color

*CTL

[0 / 0 / 1]

0: JFIF/JPEG

1: TIFF/MMR

2: TIFF/MH

3: TIFF/MR

5-836-082

Format for Copy B&W Text

*CTL

[ 0 to 3 / 1 / 1]

0: JFIF/JPEG

1: TIFF/MMR

2: TIFF/MH

3: TIFF/MR

5-836-083

Format for Copy B&W Other

*CTL

[ 0 to 3 / 1 / 1]

0: JFIF/JPEG

1: TIFF/MMR

2: TIFF/MH

3: TIFF/MR

5-836-084

Format for Printer Color

*CTL

[0 / 0 / 1]

5-836-085

Format for Printer B&W

*CTL

[ 0 to 3 / 1 / 1]

0: JFIF/JPEG