INSTALLATION PROCEDURE

2.17 KEY COUNTER INTERFACE UNIT INSTALLATION

2.17.1 INSTALLATION PROCEDURE

1. Rear cover [1] x 6)

2. Install the key counter interface board in the location [2] x 4).

3. Connect the harness to CN3 on the key counter interface board.

4. Connect the other terminal of the harness to CN214 [3] on the IOB x 3).

Key Counter Interface Unit Installation

Installation

5. Cut off the part [4] of the rear cover.

6. Connect the harness from the counter device to CN4 on the key counter interface board and clamp it with three clamps [5].

7. Reassemble the machine.