1005

[Erase margin (Remote Scan)]

Creates an erase margin for all edges of the scanned image.

If the machine has scanned the edge of the original, create a margin. This SP is activated only when the machine uses TWAIN scanning.

1005 1

Range from 0 to 5 mm

*CTL

[0 to 5 / 0 / 1 mm/step ]

1009

[Remote scan disable]

*CTL

[0 or 1 / 0 / - ]

0: enable, 1: disable

1009 1

Enable or disable remote scan.

1010

[Non Display Clear Light PDF]

*CTL

[0 or 1 / 0 / - ]

0: Display, 1: No display

1010 1

Enable or disable remote scan.

1011

[Org Count Disp]

*CTL

[0 or 1 / 0 / - ]

0: No display, 1: Display

1011 1

This SP codes switches the original count display on/off.

1012

[User Info Release]

*CTL

[0 or 1 / 1 / - ]

0: Do not release, 1: Release

1012 1

This SP code sets the machine to release or not release the following items at job end.

 Destination (E-mail/Folder/CS)

 Sender name

 Mail Text

 Subject line

 File name

1013

[Scan Media Device Setting]

*CTL

[0 or 1 / 1 / - ]

0: Disable, 1: Enable

1013 1

This SP code enables/disables the multi-media function option (USB 2.0/SD Slot) mounted on the left rear corner of the machine. Operators can scan documents to either an SD card or a USB memory device inserted into this unit. This SP must be enabled (set to "1") in order for the device to function.