HOME PAGE | < Previous | Contents | Next >
1.1.2 UPPER TRAY, END FENCE
1. Remove the rear cover. ( "Exterior Covers")
1. Support the tray [A] with your right hand.
2. Pull gear [B] toward you to release.
3. Slowly lower the tray until it stops.
4. Front side cover [C] ( x1)
5. Rear side cover [D] ( x1)
6. Upper tray [E] ( x1)
7. Tray bracket [F] ( x4, x1 shoulder screw )
8. End Fence [G]( x3)