TRAY COVER

1.1 TRAY COVER

1. Remove the tray cover [A] by pressing on the two pawls [B] on the left side of the cover.

– When Attaching the Tray Cover –

 The right side of the tray cover should be attached first.

1. Fit the pawls [C] on the shift tray.

2. Align the square [D] so that it fits into the groove in the underside of the tray cover and does not interfere with the attachment of the cover.

Internal Shift Tray SH3040/ SH3060 (D388/D633)

3. Complete the attachment by inserting the left side pawls [B] into place.