Connectivity:

Local area network

Ethernet 100base-Tx/10base-T Gigabit Ethernet 1000 Base-T IEEE802.11a/g, g (wireless LAN),

Resolution:

200 × 100 dpi (Standard resolution), 200 × 200 dpi (Detail

resolution), 200 × 400 dpi (Fine resolution)*1, 400 × 400 dpi (Super Fine resolution)*1

 To use 200 × 400 dpi and 400 × 400 dpi, IFAX SW01 Bit 2 and/or Bit 4 must be set to “1”.

Transmission Time:

1 s (through a LAN to the server)

Condition: ITU-T #1 test document (Selerexe Letter) MTF correction: OFF

TTI: None

Resolution: 200 x 100 dpi Communication speed: 10 Mbps Correspondent device: E-mail server Line conditions: No terminal access

Document Size:

Maximum Original Size: A3/DLT.

 To use B4 and A3 width, IFAX SW00 Bit 1 (B4) and/or Bit 2 (A3) must be set to “1”.

E-mail File Format:

Single/multi-part MIME conversion

Image: TIFF-F (MH, MR, MMR)

Protocol:

Transmission:

SMTP, TCP/IP

Reception:

POP3, SMTP, IMAP4, TCP/IP

Data Rate:

1000 Mbps (1000 Base-T)

100 Mbps (100base-Tx)

10 Mbps (10base-T)

Authentication Method:

SMTP-AUTH

POP before SMTP A-POP

Remark:

The machine must be set up as an e-mail client before installation. Any client PCs connected to the machine through a LAN must also be e-mail clients, or some features will not work (e.g. Autorouting).