Jam Mode

Detection Timing

Initial

When turning on the machine, the skew correction sensor, separation sensor, registration sensor or exit sensor detects an original.

When the cover is closed or DF is down, the skew correction sensor, separation sensor, registration sensor or exit sensor detects an original.

When the cover is opened or DF is lifted up, the skew correction sensor, separation sensor, registration sensor or exit sensor detects an original.

Sensor stays on too long

The skew correction sensor does not turn off even if the original was fed by the maximum length of the original + 150 mm after the skew correction sensor turned on.

The registration sensor does not turn off even if the original was fed by its length x 1.5 after the registration sensor turned on.

The exit sensor does not turn off even if the original was fed by its length x 1.5 after the exit sensor turned on.

Sensor does not come on

The separation sensor does not turn on even if the original was fed by transport path length x 1.5.

The skew correction sensor does not turn on even if the original was fed by transport path length x 1.5.

The registration sensor does not turn on even if the original was fed by transport path length x 1.5 after the skew correction sensor turned on.

The exit sensor does not turn on even the original was fed by transport path length x 1.5 after the skew correction sensor turned on.