HOME PAGE | < Previous | Contents | Next >
1.3.10STAMP SOLENOID
1. Open the left cover.
2. Remove the platen plate [A].
3. Stamp solenoid cover [B] ( x 1)
4. Remove the screw [C] ( x 1).
You cannot remove the stamp solenoid at this time.
5. Rear cover ( "Front and Rear Cover")
6. Disconnect the stamp solenoid harness [D].
7. ADF feed motor ( "ADF Feed Motor")
ARDF DF3010/ DF3070 (B802/D630)
ARDF DF3010/ DF3070 (B802/D630)
ARDF DF3010/ DF3070 (B802/D630)
Electrical Components
8. Put the stamp solenoid harness into the cutout [E].
9. Pull out the stamp solenoid [F]