HOME PAGE | < Previous | Contents | Next >
3.1 DIP SWITCH SETTINGS
The DIP switches should not be set to any combination other than those listed in the table below.
Description | ||
0 | 0 | Normal operation mode (Default) |
1 | 0 | Packing mode. |
Description | ||
0 | 0 | Normal operation mode (Default) |
1 | 0 | Packing mode. |
Description | ||
0 | 0 | Normal operation mode (Default) |
1 | 0 | Packing mode. |
SW100
1 2
Before packing the machine, do the following: Set switch 1 to 1 then back to zero. The lower tray moves to the lowest position. Then turn off the main switch.
1000-Sheet Finisher SR790/SR3090
B408/D588
1000-Sheet Finisher SR790/SR3090
B408/D588
1000-Sheet Finisher SR790/SR3090
B408/D588
After unpacking the machine, do the following: After turning the main switch back on, the lower tray returns to home position automatically.