HOME PAGE | < Previous | Contents | Next >
6 | 4848(COPY) | 4400 (GPS) | 5375 (Scan) | 5682 (NFA) |
7 | 2224 (BCU) | 4500 (PDL) | 5682 (NFA) | 6600 (WebDB) |
8 | 4600 (GPS-PM) | 3000 (NCS) | 3300 (PTS) | |
9 | 2000 (NCS) | 2000 (NCS) | 6666 (WebSys) | |
10 | 2224 (BCU) | 2000 (NCS) |
The default settings for Keys 1 to 10 are all zero ("0").
Key to Acronyms
Acronym | Meaning | Acronym | Meaning |
ECS | Engine Control Service | NFA | Net File Application |
GPS | GW Print Service | PDL | Printer Design Language |
GSP-PM | GW Print Service – Print Module | PTS | Print Server |
IMH | Image Memory Handler | SCS | System Control Service |
MCS | Memory Control Service | SRM | System Resource Management |
NCS | Network Control Service | WebDB | Web Document Box (Document Server) |
Service Tables
Service Tables
Service Tables
The machine is now set to record the debugging information automatically on the HDD (the target selected with SP5-857-002) for the events that you selected SP5-858and the memory modules selected with SP5-859.
Please keep the following important points in mind when you are doing this setting:
Note that the number entries for Keys 1 to 5 are the same for the Copy, Printer, Scanner, and Web memory modules.
The initial settings are all zero.
These settings remain in effect until you change them. Be sure to check all the settings, especially the settings for Keys 6 to 10. To switch off a key setting, enter a zero for that key.