HOME PAGE | < Previous | Contents | Next >
Uploading/Downloading NVRAM Data
5.13.2 DOWNLOADING NVRAM DATA (SP5-825)
The following data are not downloaded from the SD card:
Total counter
C/O, P/O Counter
Duplex, A3/DLT/Over 420 mm, Staple and Scanner application scanning counters (system settings).
Engine SP data
Service Tables
Service Tables
Service Tables
1. Turn off the main switch.
2.
3. Plug the SD card into SD card slot 2 (Lower Slot) [A].
4. Turn on the main switch.
5. Execute SP5-825.
6. Press "1" to start downloading the NVRAM data.
Uploading/Downloading NVRAM Data
Note that the following errors could occur during downloading:
If a card is not installed in the card slot and a message tells you that downloading cannot proceed, you cannot execute downloading, even by pressing "1".
If the correct card for the NVRAM data is not inserted in the card slot, after you press "1" a message will tell you that downloading cannot proceed because the card is abnormal and the execution will halt.