HOME PAGE | < Previous | Contents | Next >
5.11 MAIN SP TABLES-9
5.11.1 INPUT CHECK TABLE
When entering the Input Check mode, 8 digits display the result for a section. Each digit corresponds to a different device as shown in the table.
Bit No. | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
Result | 0 or 1 | 0 or 1 | 0 or 1 | 0 or 1 | 0 or 1 | 0 or 1 | 0 or 1 | 0 or 1 |
Service Tables
Service Tables
Service Tables
Copier
5803 | Input Check | ||
Description | Reading | ||
0 | 1 | ||
001 | Tray 1: Paper Size Sensor | See the table 1 following this table. | |
002 | Tray 1: Tray Set Sensor | Set | Not set |
003 | Tray 1: Paper Lift Sensor | Not upper limit | Upper limit |
004 | Tray 1: Paper End Sensor | No paper | Paper remaining |
005 | Tray 1: Paper Height Sensor 1 | See the table 2 following this table. | |
006 | Tray 1: Paper Height Sensor 2 | ||
007 | Tray 2: Paper Size Sensor | See the table 1 following this table. | |
008 | Tray 2: Tray Set Sensor | Set | Not set |
009 | Tray 2: Paper Lift Sensor | Not upper limit | Upper limit |
010 | Tray 2: Paper End Sensor | No paper | Paper remaining |
Main SP Tables-9
011 | Tray 2: Paper Height Sensor 1 | See the table 2 following this table. | |
012 | Tray 2: Paper Height Sensor 2 | ||
013 | Tray 1: Paper Feed Sensor | Paper detected | No paper detected |
014 | Tray 2: Paper Feed Sensor | Paper detected | No paper detected |
015 | Tray 3: Paper Feed Sensor | Paper detected | No paper detected |
016 | Tray 4: Paper Feed Sensor | Paper detected | No paper detected |
017 | LCT: Paper Feed Sensor | No paper detected | Paper detected |
018 | Relay Sensor 1 | Paper detected | No paper detected |
019 | Relay Sensor 2 | Paper detected | No paper detected |
020 | Relay Sensor 3 | No paper detected | Paper detected |
021 | Relay Sensor 4 | No paper detected | Paper detected |
022 | Relay Sensor: LCT | No paper detected | Paper detected |
023 | By-pass: Paper End Sensor | Not end | Paper end |
024 | By-pass: Paper Size Sensor | See the table 3 following this table. | |
025 | Registration Sensor | Paper detected | No paper detected |
026 | Fusing Exit Sensor | No paper detected | Paper detected |
027 | Fusing Entrance Sensor | Paper detected | No paper detected |
028 | Junction Gate Relay Sensor | Paper detected | No paper detected |
029 | Exit Sensor | Paper detected | No paper detected |
030 | Paper Overflow Sensor | Not full | Full |
031 | Right Cover Open/Close | Close | Open |
032 | Duplex Unit Open/Close | Open | Close |
033 | Duplex Entrance Sensor | Paper detected | No paper detected |
034 | Duplex Exit Sensor | Paper detected | No paper detected |
Service Tables
Service Tables
Service Tables
Main SP Tables-9
035 | Bank Right Cover Open/Close | Close | Open |
036 | Tray Cover Open/Close | Close | Open |
037 | LCT Set | Set | Not set |
038 | Bridge/Exit Tray: Exit Sensor | Paper detected | No paper detected |
039 | Bridge/Exit Tray: Relay Sensor | Paper detected | No paper detected |
040 | Bridge/Exit/Shift: Set Detection | Set | Not set |
041 | Bridge/Exit Tray: Left Guide Open/Close | Close | Open |
042 | Bridge/Exit Tray: Right Guide Open/Close | Close | Open |
043 | Transfer Belt Unit HP Sensor | Not HP | HP |
046 | Fusing Unit Set | Set (Bit1) | Not set (Bit1) |
047 | Toner Overflow Sensor | Not full | Full |
048 | Interlock Detection 1 | Right or front door is open. | Right or front door is close. |
049 | Interlock Detection 2 | Right or front door is open. | Right or front door is close. |
050 | Key Card Set | Set | Not set |
051 | Key Counter Set | Set | Not set |
052 | Mechanical Counter Set | Not set | set |
053 | 1-Bin Unit Set | Set | Not set |
054 | 1-Bin Unit: Paper Set | Paper detected | No paper detected |
057 | Cleaning Web End | Not end | End |
060 | Shift Sensor | No paper detected | Paper detected |
064 | Shift Tray Sensor | Stay at rear | Stay at front |
065 | Bypass Tray Paper Length Detection | Paper detected | No paper detected |