Installing a new web holder roller

The holder [A] has a one-way clutch. Make sure that the holder [A] is set at the front side.

Installing new web rollers

1. Install the web supply roller [A] first ). Make sure that the web sheet is under the pin [B].

2. Install the web take up roller [C] ). Make sure that the printed number [D] is outside the web take up roller.

3. Reinstall the rear gear bracket p.4-63 "Web Holder Roller and Web Rollers").

4. Reinstall the front and rear gears and bushings p.4-63 "Web Holder Roller and Web Rollers").

5. Reinstall the rear gear bracket p.4-63 "Web Holder Roller and Web Rollers").