HOME PAGE | < Previous | Contents | Next >

Fax Connection Unit Type A (D629-31)‌

Rev. 04/23/2012

 2.24 FAX CONNECTION UNIT TYPE A (D629-31) (REMOTE FAX)

2.24.1 INSTALLATION PROCEDURE

This unit allows a machine without the FAX unit installed (“Client-side Machine”) to send and receive faxes via a machine with the FAX unit installed (“Remote Machine”).

Requirements:

 Both the Client-side Machine and Remote Machine must have this unit, the Printer unit, and Scanner unit installed.

 Up to six machines can be registered as the Client-side Machines.

 Machines that have the FAX unit installed cannot be used as the Client-side Machine.

 Only machine can be registered as the Remote Machine.

 Firmware for this unit: “aics” （software number: D6295750）

 Remote Fax transmissions are possible on a G3 line.

 The remote fax function does not support User Code Authentication. Disable the User Code Authentication on the Remote machine.

 Use this function to check the contents of a file that is stored in memory and not yet sent.

Also, use this function to cancel a transmission from the Client-side Machine.

Before installing this option:

 Upgrade the machine firmware to the following versions or newer.

D129/D130 2-94 SM

HOME PAGE |

< Previous | Contents | Next >