BROWSER UNIT TYPE I

 2.22 BROWSER UNIT TYPE I

2.22.1 INSTALLATION PROCEDURE

Browser Unit Type I

Use the following procedure to install the Browser Unit Type I.

Installation

1. Turn the main switch ON.

2. Press the “User Tools/Counter” key.

3. On the touch panel, press “System Settings”.

4. Make sure that the “Increase Scanner Memory by Disabling Browser” setting in the General Features tab is OFF.

5. Turn the main switch OFF.

6. Remove the control cover [A] (screws x 2).

7. Insert the Browser Option SD card in the lower slot [A].

8. Turn the main switch ON.

9. Touch the “User Tools/Counter” key.

SM 2-83 D129/D130

Browser Unit Type I

Rev. 04/20/2012

10. On the touch panel, touch “Extended Feature settings”.

11. Touch “Extended Feature settings” in the Extended Feature Settings Menu.

12. Make sure that “Extended JS” application was automatically installed in the Startup Settings tab.

13. Turn the main switch OFF/ON.

14. Move the application to the SD card that is installed to slot 1.

15. Note: See the Service Manual for details on merging SD Applications.

D129/D130 2-84 SM

Rev. 04/20/2012

Browser Unit Type I

16. Press the “User Tools/Counter” key.

Installation

17. Touch “Edit home”.

18. Touch “Add Icon”.

19. Touch “Browse”.

20. Touch a blank square to set the location for the browser icon.

21. Touch “Exit” to complete the addition of the FAX browser icon.

SM 2-85 D129/D130

Browser Unit Type I

Rev. 04/20/2012

2.22.2 DO THE FOLLOWING STEPS IF THE CUSTOMER IS USING THE RICOH JAVASCRIPT CONNECTED TO A WEB APPLICATION DEVELOPED BY OPERIUS/RIDP.

1. Turn the main switch ON.

2. Press the “User Tools/Counter” key.

3. On the touch panel, touch “Browser Features”.

4. Touch “JavaScript”.

5. Change the Extended JavaScript setting to “Active”.

D129/D130 2-86 SM