HOME PAGE | < Previous | Contents | Next >
1. REPLACEMENT AND ADJUSTMENT 1
1.1 EXTERIOR PART 1
1.1.1 FRONT COVER 1
1.1.2 INNER COVER 2
1.1.3 REAR COVER 3
1.1.4 FRONT LEFT COVER 3
1.1.5 UPPER COVER 4
1.1.6 UPPER FRONT COVER 5
1.1.7 UPPER REAR COVER 6
1.1.8 PROOF TRAY 7
1.1.9 SHIFT TRAY 7
1.1.10 BOOKLET TRAY 8
1.1.11 UPPER LEFT COVER 8
1.1.12 LEFT CENTER COVER 9
1.1.13 LEFT LOWER COVER 10
1.2 PAPER EJECT COVER OPEN/CLOSE MOTOR 11
1.3 PAPER EJECT COVER HP SENSOR 12
1.4 PROOF TRAY FULL SENSOR 13
1.5 PROOF PAPER EJECT SENSOR 14
1.6 ENTRANCE PAPER SURFACE SENSOR 16
1.7 INTERMEDIATE TRANSPORT (RIGHT) PAPER SURFACE SENSOR 17
1.8 INTERMEDIATE TRANSPORT (LEFT) PAPER SURFACE SENSOR 18
1.9 SHIFT TRAY PAPER SURFACE SENSOR 19
1.10 SHIFT TRAY UPPER LIMIT SWITCH 21
1.11 SHIFT PAPER EJECT SENSOR 22
1.12 BOOKLET STITCH UNIT 23
1.13 CENTER-FOLDING UNIT 25
1.14 CENTER-FOLDING PAPER EJECT SENSOR 28
1.15 EDGE STOPPER PAPER SURFACE SENSOR 29
1.16 EDGE STOPPER HP SENSOR 30
1.17 CENTER-FOLDING BLADE HP SENSOR 31
1.18 CENTER-FOLDING CAM HP SENSOR 32
1.19 EDGE STOPPER MOTOR 33
1.20 FOLDING BLADE MOTOR 34
1.21 FOLDING TRANSPORT MOTOR 35
1.22 CENTER-FOLDING FULL SENSORS 1, 2 36
1.23 MAIN CONTROL BOARD 37
1.24 PROOF TRANSPORT MOTOR 38
1.25 STRIKE MOTOR 39
1.26 SHIFT MOTOR 40
1.27 PAPER EJECT TRANSPORT MOTOR 41
1.28 BOOKLET STITCH BUNDLE TRANSPORT (UPPER) MOTOR 42
1.29 STAPLER TRANSFER MOTOR 44
1.30 BOOKLET TRANSPORT (LOWER) PRESSURE RELEASE MOTOR ..45 1.31 STAPLER RETREAT SENSOR 46
1.32 STAPLER TRAY 47
1.33 STAPLER TRAY PAPER SURFACE SENSOR 49
1.34 BOOKLET STITCH BUNDLE TRANSPORT (UPPER) HP SENSOR 50
1.35 RELEASE CLAW HP SENSOR 51
1.36 JOGGER HP SENSOR 52
1.37 JOGGER DRIVE MOTOR 53
1.38 BOOKLET TRANSPORT (UPPER) PRESSURE RELEASE MOTOR ...54 1.39 RELEASE CLAW MOTOR 55
1.40 STAPLER UNIT 56