HOME PAGE | < Previous | Contents | Next >
SMART OPERATION PANEL TYPE M3 (D148)
SMART OPERATION PANEL TYPE M3 (D148)
SMART OPERATION PANEL TYPE M3 (D148)
4.1 SYSTEM MAINTENANCE
4.1.1 BASIC OPERATION
Switching the Power OFF before Performing Maintenance (before Disconnecting the Power Supply Plug)
1. Press the power switch while pressing the [STOP] key.
Continue pressing the [STOP] key until "Shutting Down" is displayed.
Shutdown can be performed in a short time even when the Quick Startup Mode is set.
Switching the Power OFF before Upgrading the MFP (Controller/Engine) Version
1. Press the power switch while pressing the [STOP] key.
Continue pressing the [STOP] key until "Shutting Down" is displayed.
When upgrading the Android screen firmware version, switch the power OFF by the normal procedure.
Reset Procedure If the Android Screen Freezes
If reset is performed when the Android screen is in operation, data stored in the Android screen may be corrupted.
1. Press the reset button on the left side of the control unit in order to reboot the control unit.