HOME PAGE | < Previous | Contents | Next >
3.1 OVERVIEW
3.1.1 SYSTEM COMPONENTS
The Android control unit is a control unit in which the Android OS connected with the MFP by USB, is installed.
[A]: Android screen
[B]: Android firmware (update from recovery mode)
[C]: Android application (perform installation version update from screen SP mode)
Specification
Category | Item | Contents | Remarks |
LCD | Size | 10.1 inch panel | |
No. of pixels | WSVGA (1024×600) | ||
Bit width | RGB666 | 18-bit color | |
Brightness | 200cd/m2(typ.) | ||
Back light | LED rear light (lifetime 15000h) | ||
Touch panel | Light load touch panel, 2 -point touch detection | ||
Memory | Volatile memory | RAM: 1GB |
SMART OPERATION PANEL TYPE M3 (D148)
SMART OPERATION PANEL TYPE M3 (D148)
SMART OPERATION PANEL TYPE M3 (D148)
Overview
Category | Item | Contents | Remarks |
Non-volatile memory | NAND: 2GB | Program area and data area for the OS and applications | |
External I/F | USB memory | USB2.0 Host Type-A | |
SD card | SD card slot 1ch (SD/SDHC) | ||
USB | USB2.0 Host Type-mini AB | Not available | |
Network | Wireless LAN | 802.11b/g/n | |
Audio input/output | Speaker/microphone | Monophonic speaker 1ch (power 1-2W) Microphone | |
Power consumption | When active | During regular time: Less than 4W During wireless-LAN high-load operation: Less than 4.6W | Excluding external I/F and internal function expansion. |
During sleep | Less than 350 mW | In sleep mode or while the power is off, do not supply power to an extension USB device connected to an external USB port. |
Available languages
Japanese, American English, German, French, Italian, Spanish, Dutch, Spanish, Russian, Chinese (simplified Chinese characters) and Chinese (traditional Chinese characters)