HOME PAGE | < Previous | Contents | Next >
Creating an SD Card for Updating
6.1 CREATING AN SD CARD FOR UPDATING
Depending on the ESA application installed in the machine, there might be some special notes or procedure when updating Java platform. See the manual for the ESA application.
Conventionally, Java VM was provided by a SD card, but it is now installed as standard on the MFP controller board (NAND flash).
As components are increasingly implemented on-board, version upgrade of the VM card, which was previously done on a PC, is now done on the MFP.
1. Download the update modules from Firmware Download Center. As one of the model modules, "Java VM v11 UpdateTool" is available for download. (The version differs depending on the model.)
2. Unzip the downloaded file. Copy the whole "sdk" folder to the root of the SD card directly below.
Updating the VM Firmware
Updating the VM Firmware
Updating the VM Firmware
When unzipping the downloaded file, two subfolders ("update" and "sdk") exist in the "sdk" folder. Rather than just copying the subfolder "sdk", copy the whole folder "sdk".