HOME PAGE | < Previous | Contents | Next >
6.1 ENERGY SAVE
6.1.1 ENERGY SAVER MODES
Customers should use energy saver modes properly, to save energy and protect the environment.
Energy Save
Energy Save
Energy Save
The area shaded grey in this diagram represents the amount of energy that is saved when the timers are at the default settings. If the timers are changed, then the energy saved will be different. For example, if the timers are all set to 240 min., the grey area will disappear, and no energy is saved before 240 min. expires.
Timer Settings
The user can set these timers with User Tools (System settings > Timer setting)
Energy saver timer (1 – 30 min for NA and EU/1-240 min for others): Low Power Mode. Default setting: 1 min. (D148/D149/D150 only)
Auto off timer (1 – 60 min for NA and EU/1-240 min for others): Off/Sleep Mode. Default setting: 1 min.
Normally, Energy Saver timer < Auto Off timer. But, for example, if Auto Off timer < or = Energy Saver timer, the machine goes immediately to Off mode when the Auto Off timer expires. It skips the Energy Saver mode.
Example
Low power: 15 min.
Auto Off: 1 min.
The machine goes to Off mode after 1 minute. Low Power mode is not used.