HOME PAGE | < Previous | Contents | Next >

Electrical Components‌‌


Adjustment after replacement

1. Run SP5832-001, to initialize the hard disk.

Even if you use an HDD that is already formatted, it is recommended that you re-initialize.

2. Run SP5853-001, to install the fixed stamps.

3. Run SP5846-052, to copy the address book from the SD card to the HDD.

4. Turn off the machine, and then turn it back on.


4.17.7 CPU COOLING FAN

1. Rear cover (page 4-10 "Rear Cover")

Replacement and Adjustment

Replacement and Adjustment

Replacement and Adjustment

2. CPU cooling fan [A] image×4)

image


4.17.8 IMAGING IOB

1. Scanner rear cover (page 4-11 "Scanner Rear Cover")

2. Scanner rear small cover (page 4-12 "Scanner Rear Cover (Small)")

3. Rear right cover (page 4-11 "Rear Right Cover")

4. Open the controller box [A]. image×6)



5.

  

 

HOME PAGE |

< Previous | Contents | Next >