HOME PAGE | < Previous | Contents | Next >
Mounting position and orientation of the NVRAMs
When replacing the controller board, first, check which SDK applications have been installed. After replacing the controller board, re-install the SDK applications by following the installation instructions for each application.
After reinstalling the SDK applications, print the SMC (SP-5-990-024/025 (SMC: SDK/Application Info)). Then open the Main power switch cover. Store the SMC sheet and the SD card(s) that was used to install the SDK application(s).
4.17.6 HDD
Before replacing the HDD, copy the address book data to an SD card with SP5846-051 if possible.
If the customer is using the Data Overwrite Security, the Data Encryption feature or OCR Scanned PDF, these applications must be installed again.
1. Rear cover (page 4-10 "Rear Cover")
2. HDD [A] 
×3, 
×2)
