HOME PAGE | < Previous | Contents | Next >

Fusing Unit‌

4.12.2 FUSING ENTRANCE GUIDE PLATE

1. Fusing unit (page 4-99 "Fusing Unit")

2. Fusing entrance guide plate [A] ×2)

 The screw [B] is a threaded screw. When you assemble the unit, take care not to use the wrong screws.

 Attach the fusing entrance guide plate on the outer of the two screw holes.

Cleaning the Fusing Entrance Guide Plate

Carefully remove toner adhering as shown in the diagram below with a dry cloth. Then, wipe with a cloth moistened with alcohol.

HOME PAGE |

< Previous | Contents | Next >