HOME PAGE | < Previous | Contents | Next >
4.5.6 LCD
Notes when replacing the LCD
Replacement and Adjustment
Replacement and Adjustment
Replacement and Adjustment
Since LCD panels from 2 vendors are used, the replacement parts are different. When replacing, check the vendor used, and ensure that you use the correct part.
Distinguishing method
Of the 3 labels on the rear of the operation panel, the center label shows the LCD model number.
Operation panel rear surface
[A]: Label attachment position
Label
[A]: S Co. LCD: Printed as Sxxxxx... [B]: C Co. LCD: Printed as Cxxxxx...
Controller Unit
Differences between operation panels from 2 vendors
Operation panel upper cover
There is no difference in appearance, but there is a difference in internal layout.
LCD bracket
There is a difference in the shape of the bracket and the stamp inside the blue circle. S Co.: S stamp
C Co.: CM stamp
Use of FFC (Flexible Flat Cable)
For S Co., FFC is used, but for C Co., instead of an FFC, a cable integrated with the LCD (orange) is used.