HOME PAGE | < Previous | Contents | Next >
2.36 PS3 CARD TYPE M4/M3
M4: D148/D149/D150, M3: D146/D147:
Installation
Installation
Installation
2.36.1 ACCESSORY CHECK
No. | Description | Q’ty |
1 | SD Card | 1 |
2.36.2 INSTALLATION PROCEDURE
1. SD card slot covers [A] 
×1)
D148/D149/D150:
PS3 Card Type M4/M3
D146/D147:
2. Insert the PS3 SD card in SD card slot 1 [A].
D148/D149/D150:
D146/D147:
PS3 Card Type M4/M3
When installing more than one SD card, perform the merge operation.
3. Switch the power ON.
4. Attach the SD card slot 
×1)
5. Stick the "Adobe PostScript3" decal on the front face of the MFP.
Installation
Installation
Installation
6. After switching the power ON, check that the system settings list is output, and that the option is recognized correctly.
The PDF firmware installed as standard contains a program required to print PS3 data as default. However, this PS3 program is normally disabled.
The PS3 firmware is a dongle (key) which enables PS3 data printing functions. When the PS3 firmware is installed, the PS3 program in the PDF firmware is enabled. Due to this specification, the self-diagnosis result report shows the ROM part number/software version of the PDF firmware contained in the PS3 program.