HOME PAGE | < Previous | Contents | Next >

File Format Converter Type E‌‌

2.27 FILE FORMAT CONVERTER TYPE E

2.27.1 ACCESSORY CHECK

2.27.2 INSTALLATION PROCEDURE

 When you install this option, switch the MFP’s power supply OFF, and unplug the power plug from the mains outlet.

 Do not put your hand into the controller box. It will result in a malfunction or injury.

 Before doing any work, touch a metal object to discharge static electricity from the body. There is a possibility that the board may malfunction due to static electricity.

1. I/F slot B (D148/D149/D150) [A] ×2), I/F slot A (D146/D147) [B] ×2) covers

D148/D149/D150:

D146/D147:

File Format Converter Type E

Installation

Installation

Installation

2. Set the File Format Converter in an I/F slot ×2)

3. Check the system settings list is output, and that the option is recognized correctly.

 The customer should keep the I/F card slot covers which were removed.

HOME PAGE |

< Previous | Contents | Next >