HOME PAGE | < Previous | Contents | Next >
IEEE 1284 Interface Board Type A
2.24 IEEE 1284 INTERFACE BOARD TYPE A
2.24.1 INSTALLATION PROCEDURE
When you install this option, Switch the MFP’s power supply OFF, and unplug the power plug from the mains outlet.
Do not put your hand into the controller box. It will result in a malfunction or injury.
Before doing any work, touch a metal object to discharge static electricity from the body. There is a possibility that the IEEE 1284 Interface Board may malfunction due to static electricity.
1. I/F slot A (D148/D149/D150) [A] 
×2), I/F slot B (D146/D147) [B] 
×2) covers.
D148/D149/D150:
D146/D147:
2. Attach the IEEE 1284 Interface Board to the I/F slot 
×2)
3. Check that the system settings list is output, and that the board is recognized correctly.
IEEE 1284 Interface Board Type A
Installation
Installation
Installation
The customer should keep the I/F card slot covers which were removed.