HOME PAGE | < Previous | Contents | Next >
2.21 KEY COUNTER BRACKET TYPE M3
2.21.1 INSTALLATION PROCEDURE
1. Scanner right cover.
2. Make a screw hole in the removed scanner right cover with a screwdriver or drill.
3. Attach the tray bracket [A] to the scanner right cover ( 
[B] × 2: M3x10).
For this model, use the screw holes marked "1" on the table bracket.
4. Attach the lower tray [A] to the tray bracket ( 
×2: M3x8).
5. Attach the upper tray [B] to the tray bracket ( 
×1: M3x8).
6. Use the clamps as necessary to clamp the cable of the card read/writer device.
Key Counter Bracket Type M3
Installation
Installation
Installation
The smart card reader must be placed on this card reader table. If not, some antenna or transmitter in the main machine may be interrupted.