Ricoh MP C2004/C2504 Service Manual Part 36

Controller SP Mode Tables

Controller SP Mode Tables

7836

[Total Memory Size]

Controller SP Mode Tables

Controller SP Mode Tables

Controller SP Mode Tables

4.3 CONTROLLER SP TABLES - SP8000

4.3.1 SP8-XXX (DATA LOG 2)

Many of these counters are provided for features that are currently not available, such as sending color faxes, and so on. However, here are some Group 8 codes that when used in combination with others, can provide useful information.

Specifically, the following questions can be answered:

• How is the document server actually being used?

• What application is using the document server most frequently?

• What data in the document server is being reused?

  Most of the SPs in this group are prefixed with a letter that indicates the mode of operation (the mode of operation is referred to as an "application"). Before reading the Group 8 Service Table, make sure that you understand what these prefixes mean.

  
  

  Prefixes	What it means
  T:	Total: (Grand Total).	Grand total of the items counted for all applications (C, F, P, etc.).
  C:	Copy application.	Totals (pages, jobs, etc.) executed for each application when the job was not stored on the document server.
  F:	Fax application.
  P:	Print application.
  S:	Scan application.

  L:	Local storage (document server)	Totals (jobs, pages, etc.) for the document server. The L: counters work differently case by case. Sometimes, they count jobs/pages stored on the document server; this can be in document server mode (from the document server window), or from another mode, such as from a printer driver or by pressing the Store File button in the Copy mode window. Sometimes, they include occasions when the user uses a file that is already on the document server. Each counter will be discussed case by case.
  O:	Other applications (external network applications, for example)	Refers to network applications such as Web Image Monitor. Utilities developed with the SDK (Software Development Kit) will also be counted with this group in the future.

  
  

  Controller SP Mode Tables

  The Group 8 SP codes are limited to 17 characters, forced by the necessity of displaying them on the small LCDs of printers and faxes that also use these SPs. Read over the list of abbreviations below and refer to it again if you see the name of an SP that you do not understand.

  
  

  Keys and abbreviations in Data Log 2

  
  

  Abbreviation	What it means
  /	"By", e.g. "T:Jobs/Apl" = Total Jobs "by" Application
  >	More (2> "2 or more", 4> "4 or more"
  AddBook	Address Book
  Apl	Application
  B/W	Black & White
  Bk	Black
  C	Cyan
  ColCr	Color Create
  ColMode	Color Mode

  Abbreviation	What it means
  Comb	Combine
  Comp	Compression
  Deliv	Delivery
  DesApl	Designated Application. The application (Copy, Fax, Scan, Print) used to store the job on the document server, for example.
  Dev Counter	Development Count, no. of pages developed.
  Dup, Duplex	Duplex, printing on both sides
  Emul	Emulation
  FC	Full Color
  FIN	Post-print processing, i.e. finishing (punching, stapling, etc.)
  Full Bleed	No Margins
  GenCopy	Generation Copy Mode
  GPC	Get Print Counter. For jobs 10 pages or less, this counter does not count up. For jobs larger than 10 pages, this counter counts up by the number that is in excess of 10 (e.g., for an 11-page job, the counter counts up 11-10 =1)
  IFax	Internet Fax
  ImgEdt	Image Edit performed on the original with the copier GUI, e.g. border removal, adding stamps, page numbers, etc.
  K	Black (YMCK)
  LS	Local Storage. Refers to the document server.
  LSize	Large (paper) Size
  Mag	Magnification
  MC	One color (monochrome)

  Abbreviation	What it means
  NRS	New Remote Service, which allows a service center to monitor machines remotely. "NRS" is used overseas, "CSS" is used in Japan.
  Org	Original for scanning
  OrgJam	Original Jam
  Palm 2	Print Job Manager/Desk Top Editor: A pair of utilities that allows print jobs to be distributed evenly among the printers on the network, and allows files to moved around, combined, and converted to different formats.
  PC	Personal Computer
  PGS	Pages. A page is the total scanned surface of the original. Duplex pages count as two pages, and A3 simplex count as two pages if the A3/DLT counter SP is switched ON.
  PJob	Print Jobs
  Ppr	Paper
  PrtJam	Printer (plotter) Jam
  PrtPGS	Print Pages
  R	Red (Toner Remaining). Applies to the wide format model A2 only. This machine is under development and currently not available.
  Rez	Resolution
  SC	Service Code (Error SC code displayed)
  Scn	Scan
  Sim, Simplex	Simplex, printing on 1 side.
  S-to-Email	Scan-to-E-mail
  SMC	SMC report printed with SP5990. All of the Group 8 counters are recorded in the SMC report.
  Svr	Server

  Controller SP Mode Tables

  Abbreviation	What it means
  TonEnd	Toner End
  TonSave	Toner Save
  TXJob	Send, Transmission
  YMC	Yellow, Magenta, Cyan
  YMCK	Yellow, Magenta, Cyan, Black

  
  

  • All of the Group 8 SPs are able to reset by “SP5 801 1 Memory All Clear”.

    
    

    8001	[T:Total Jobs]	*CTL	These SPs count the number of times each application is used to do a job. [0 to 99999999 / - / 1] Note: The L: counter is the total number of times the other applications are used to send a job to the document server, plus the number of times a file already on the document server is used.
    8002	[C:Total Jobs]	*CTL
    8003	[F:Total Jobs]	*CTL
    8004	[P:Total Jobs]	*CTL
    8005	[S:Total Jobs]	*CTL
    8006	[L:Total Jobs]	*CTL

    
    

• These SPs reveal the number of times an application is used, not the number of pages processed.

• When an application is opened for image input or output, this counts as one job.

• Interrupted jobs (paper jams, etc.) are counted, even though they do not finish.

• Only jobs executed by the customer are counted. Jobs executed by the customer engineer using the SP modes are not counted.

• When using secure printing (when a password is required to start the print job), the job is counted at the time when either "Delete Data" or "Specify Output" is specified.

• A job is counted as a fax job when the job is stored for sending.

• When a fax is received to fax memory, the F: counter increments but the L: counter does not (the document server is not used).

• A fax broadcast counts as one job for the F: counter (the fax destinations in the broadcast are not counted separately).

• A fax broadcast is counted only after all the faxes have been sent to their destinations. If one transmission generates an error, then the broadcast will not be counted until the transmission

  Controller SP Mode Tables

  has been completed.

• A printed fax report counts as one job for the F: counter.

• The F: counter does not distinguish between fax sending or receiving.

• When a copy job on the document server is printed, SP8022 also increments, and when a print job stored on the document server is printed, SP8024 also increments.

• When an original is both copied and stored on the document server, the C: and L: counters both increment.

• When a print job is stored on the document server, only the L: counter increments.

• When the user presses the Document Server button to store the job on the document server, only the L: counter increments.

• When the user enters document server mode and prints data stored on the document server, only the L: counter increments.

• When an image received from Palm 2 is received and stored, the L: counter increments.

• When the customer prints a report (user code list, for example), the O: counter increments. However, for fax reports and reports executed from the fax application, the F: counter increments.

  
  

  8011	[T:Jobs/LS]	*CTL	These SPs count the number of jobs stored to the document server by each application, to reveal how local storage is being used for input. [0 to 99999999 / 0 / 1] The L: counter counts the number of jobs stored from within the document server mode screen at the operation panel.
  8012	[C:Jobs/LS]	*CTL
  8013	[F:Jobs/LS]	*CTL
  8014	[P:Jobs/LS]	*CTL
  8015	[S:Jobs/LS]	*CTL
  8016	[L:Jobs/LS]	*CTL
  8017	[O:Jobs/LS]	*CTL

  
  

• When a scan job is sent to the document server, the S: counter increments. When you enter document server mode and then scan an original, the L: counter increments.

• When a print job is sent to the document server, the P: counter increments.

• When a network application sends data to the document server, the O: counter increments.

• When an image from Palm 2 is stored on the document server, the O: counter increments.

• When a fax is sent to the document server, the F: counter increments.

  
  

  8021

  [T:Pjob/LS]

  *CTL

  These SPs reveal how files printed from

  8022	[C:Pjob/LS]	*CTL	the document server were stored on the document server originally. [0 to 99999999 / 0 / 1] The L: counter counts the number of jobs stored from within the document server mode screen at the operation panel.
  8023	[F:Pjob/LS]	*CTL
  8024	[P:Pjob/LS]	*CTL
  8025	[S:Pjob/LS]	*CTL
  8026	[L:Pjob/LS]	*CTL
  8027	[O:Pjob/LS]	*CTL

  
  

• When a copy job stored on the document server is printed with another application, the C: counter increments.

• When an application like DeskTopBinder merges a copy job that was stored on the document server with a print job that was stored on the document server, the C: and P: counters both increment.

• When a job already on the document server is printed with another application, the L: counter increments.

• When a scanner job stored on the document server is printed with another application, the S: counter increments. If the original was scanned from within document server mode, then the L: counter increments.

• When images stored on the document server by a network application (including Palm 2), are printed with another application, the O: counter increments.

• When a copy job stored on the document server is printed with a network application (Web Image Monitor, for example), the C: counter increments.

• When a fax on the document server is printed, the F: counter increments.

  
  

  8031	[T:Pjob/DesApl]	*CTL	These SPs reveal what applications were used to output documents from the document server. [0 to 99999999 / 0 / 1] The L: counter counts the number of jobs printed from within the document server mode screen at the operation panel.
  8032	[C:Pjob/DesApl]	*CTL
  8033	[F:Pjob/DesApl]	*CTL
  8034	[P:Pjob/DesApl]	*CTL
  8035	[S:Pjob/DesApl]	*CTL
  8036	[L:Pjob/DesApl]	*CTL
  8037	[O:Pjob/DesApl]	*CTL

  
  

• When documents already stored on the document server are printed, the count for the

  Controller SP Mode Tables

  application that started the print job is incremented.

• When the print job is started from a network application (Desk Top Binder, Web Image Monitor, etc.) the L: counter increments.

  
  

  8041	[T:TX Jobs/LS]	*CTL	These SPs count the applications that stored files on the document server that were later accessed for transmission over the telephone line or over a network (attached to an e-mail, or as a fax image by I-Fax). [0 to 99999999 / 0 / 1] Note: Jobs merged for sending are counted separately. The L: counter counts the number of jobs scanned from within the document server mode screen at the operation panel.
  8042	[C:TX Jobs/LS]	*CTL
  8043	[F:TX Jobs/LS]	*CTL
  8044	[P:TX Jobs/LS]	*CTL
  8045	[S:TX Jobs/LS]	*CTL
  8046	[L:TX Jobs/LS]	*CTL
  8047	[O:TX Jobs/LS]	*CTL

  
  

• When a stored copy job is sent from the document server, the C: counter increments.

• When images stored on the document server by a network application or Palm2 are sent as an e-mail, the O: counter increments.

  
  

  8051	[T:TX Jobs/DesApl]	*CTL	These SPs count the applications used to send files from the document server over the telephone line or over a network (attached to an e-mail, or as a fax image by I-Fax). Jobs merged for sending are counted separately. [0 to 99999999 / 0 / 1] The L: counter counts the number of jobs sent from within the document server mode screen at the operation panel.
  8052	[C:TX Jobs/DesApl]	*CTL
  8053	[F:TX Jobs/DesApl]	*CTL
  8054	[P:TX Jobs/DesApl]	*CTL
  8055	[S:TX Jobs/DesApl]	*CTL
  8056	[L:TX Jobs/DesApl]	*CTL
  8057	[O:TX Jobs/DesApl]	*CTL

  
  

• If the send is started from Desk Top Binder or Web Image Monitor, for example, then the O: counter increments.

  
  

  8061	[T:FIN Jobs]

  	These SPs total the finishing methods. The finishing method is specified by the application.
  8062	[P:FIN Jobs]
  	These SPs total finishing methods for print jobs only. The finishing method is specified by the application.
  8063	[F:FIN Jobs]
  	These SPs total finishing methods for fax jobs only. The finishing method is specified by the application. Note: Finishing features for fax jobs are not available at this time.
  8064	[P:FIN Jobs]
  	These SPs total finishing methods for print jobs only. The finishing method is specified by the application.
  8065	[S:FIN Jobs]
  	These SPs total finishing methods for scan jobs only. The finishing method is specified by the application. Note: Finishing features for scan jobs are not available at this time.
  8066	[L:FIN Jobs]
  	These SPs total finishing methods for jobs output from within the document server mode screen at the operation panel. The finishing method is specified from the print window within document server mode.
  8067	[O:FIN Jobs]
  	These SPs total finishing methods for jobs executed by an external application, over the network. The finishing method is specified by the application.
  001	Sort	*CTL	[0 to 99999999 / 0 / 1/step]
  	Number of jobs started in Sort mode.
  002	Stack	*CTL	[0 to 99999999 / 0 / 1/step]
  	Number of jobs started out of Sort mode.
  003	Staple	*CTL	[0 to 99999999 / 0 / 1/step]
  	Number of jobs started in Staple mode.

  004	Booklet	*CTL	[0 to 99999999 / 0 / 1/step]
  	Number of jobs started in Booklet mode. If the machine is in staple mode, the Staple counter also increments.
  005	Z-Fold	*CTL	[0 to 99999999 / 0 / 1/step]
  	Number of jobs started In any mode other than the Booklet mode and set for folding (Z-fold).
  006	Punch	*CTL	[0 to 99999999 / 0 / 1/step]
  	Number of jobs started in Punch mode. When Punch is set for a print job, the P: counter increments. (See SP8-064-6.)
  007	Other	*CTL	[0 to 99999999 / 0 / 1/step]
  008	Inside-Flod	*CTL	[0 to 99999999 / 0 / 1/step]
  009	Three-In-Fold	*CTL	[0 to 99999999 / 0 / 1/step]
  010	Three-OUT-Fold	*CTL	[0 to 99999999 / 0 / 1/step]
  011	Four-Fold	*CTL	[0 to 99999999 / 0 / 1/step]
  012	KANNON-Fold	*CTL	[0 to 99999999 / 0 / 1/step]
  013	Perfect-Bind	*CTL	[0 to 99999999 / 0 / 1/step]
  014	Ring-Bind	*CTL	[0 to 99999999 / 0 / 1/step]
  015	3rd Vendor	*CTL	[0 to 99999999 / 0 / 1/step]

  Controller SP Mode Tables

  
  

  
  

  8071	[T:Jobs/PGS]
  	These SPs count the number of jobs broken down by the number of pages in the job, regardless of which application was used.
  8072	[C:Jobs/PGS]
  	These SPs count and calculate the number of copy jobs by size based on the number of pages in the job.
  8073	[F:Jobs/PGS]
  	These SPs count and calculate the number of fax jobs by size based on the number of pages in the job.

  8074	[P:Jobs/PGS]
  	These SPs count and calculate the number of print jobs by size based on the number of pages in the job.
  8075	[S:Jobs/PGS]
  	These SPs count and calculate the number of scan jobs by size based on the number of pages in the job.
  8076	[L:Jobs/PGS]
  	These SPs count and calculate the number of jobs printed from within the document server mode window at the operation panel, by the number of pages in the job.
  8077	[O:Jobs/PGS]
  	These SPs count and calculate the number of "Other" application jobs (Web Image Monitor, Palm 2, etc.) by size based on the number of pages in the job.
  001	1 Page	*CTL	[0 to 99999999 / 0 / 1/step]
  002	2 Pages	*CTL	[0 to 99999999 / 0 / 1/step]
  003	3 Pages	*CTL	[0 to 99999999 / 0 / 1/step]
  004	4 Pages	*CTL	[0 to 99999999 / 0 / 1/step]
  005	5 Pages	*CTL	[0 to 99999999 / 0 / 1/step]
  006	6 to 10 Pages	*CTL	[0 to 99999999 / 0 / 1/step]
  007	11 to 20 Pages	*CTL	[0 to 99999999 / 0 / 1/step]
  008	21 to 50 Pages	*CTL	[0 to 99999999 / 0 / 1/step]
  009	51 to 100 Pages	*CTL	[0 to 99999999 / 0 / 1/step]
  010	101 to 300 Pages	*CTL	[0 to 99999999 / 0 / 1/step]
  011	301 to 500 Pages	*CTL	[0 to 99999999 / 0 / 1/step]
  012	501 to 700 Pages	*CTL	[0 to 99999999 / 0 / 1/step]
  013	701 to 1000 Pages	*CTL	[0 to 99999999 / 0 / 1/step]
  014	1001 to Pages	*CTL	[0 to 99999999 / 0 / 1/step]

  Controller SP Mode Tables

• For example: When a copy job stored on the document server is printed in document server mode, the appropriate L: counter (SP8076 0xx) increments.

• Printing a fax report counts as a job and increments the F: counter (SP 8073).

• Interrupted jobs (paper jam, etc.) are counted, even though they do not finish.

• If a job is paused and re-started, it counts as one job.

• If the finisher runs out of staples during a print and staple job, then the job is counted at the time the error occurs.

• For copy jobs (SP 8072) and scan jobs (SP 8075), the total is calculated by multiplying the number of sets of copies by the number of pages scanned. (One duplex page counts as 2.)

• The first test print and subsequent test prints to adjust settings are added to the number of pages of the copy job (SP 8072).

• When printing the first page of a job from within the document server screen, the page is counted.

  
  

  8111	[T:FAX TX Jobs]
  	These SPs count the total number of jobs (color or black-and-white) sent by fax, either directly or using a file stored on the document server, on a telephone line. Note: Color fax sending is not available at this time.
  001	B/W	*CTL	[0 to 99999999 / 0 / 1/step]
  002	Color	*CTL	[0 to 99999999 / 0 / 1/step]

  
  

  
  

  8113	[F:FAX TX Jobs]
  	These SPs count the total number of jobs (color or black-and-white) sent by fax directly on a telephone line. Note: Color fax sending is not available at this time.
  001	B/W	*CTL	[0 to 99999999 / 0 / 1/step]
  002	Color	*CTL	[0 to 99999999 / 0 / 1/step]

  
  

• These counters count jobs, not pages.

• This SP counts fax jobs sent over a telephone line with a fax application, including documents stored on the document server.

• If the mode is changed during the job, the job will count with the mode set when the job started.

• If the same document is faxed to both a public fax line and an I-Fax at a destination where

  both are available, then this counter increments, and the I-Fax counter (8 12x) also increments.

• The fax job is counted when the job is scanned for sending, not when the job is sent.

  
  

  8121	[T:IFAX TX Jobs]
  	These SPs count the total number of jobs (color or black-and-white) sent, either directly or using a file stored on the document server, as fax images using I-Fax. Note: Color fax sending is not available at this time.
  8123	[F:IFAX TX Jobs]
  	These SPs count the number of jobs (color or black-and-white) sent (not stored on the document server), as fax images using I-Fax. Note: Color fax sending is not available at this time.
  001	B/W	*CTL	[0 to 99999999 / 0 / 1/step]
  002	Color	*CTL	[0 to 99999999 / 0 / 1/step]

  
  

• These counters count jobs, not pages.

• The counters for color are provided for future use; the color fax feature is not available at this time.

• The fax job is counted when the job is scanned for sending, not when the job is sent.

  
  

  8131	[T:S-to-Email Jobs]
  	These SPs count the total number of jobs (color or black-and-white) scanned and attached to an e-mail, regardless of whether the document server was used or not.
  8135	[S:S-to-Email Jobs]
  	These SPs count the number of jobs (color or black-and-white) scanned and attached to e-mail, without storing the original on the document server.
  001	B/W	*CTL	[0 to 99999999 / 0 / 1/step]
  002	Color	*CTL	[0 to 99999999 / 0 / 1/step]
  003	ACS	*CTL	[0 to 99999999 / 0 / 1/step]

  Controller SP Mode Tables

• These counters count jobs, not pages.

• If the job is stored on the document server, after the job is stored it is determined to be color or black-and-white then counted.

• If the job is cancelled during scanning, or if the job is cancelled while the document is waiting to be sent, the job is not counted.

• If the job is cancelled during sending, it may or may not be counted, depending on what stage of the process had been reached when the job was cancelled.

• If several jobs are combined for sending to the Scan Router, Scan-to-Email, or Scan-to-PC, or if one job is sent to more than one destination. each send is counted separately. For example, if the same document is sent by Scan-to-Email as well as Scan-to-PC, then it is counted twice (once for Scan-to-Email and once for Scan-to-PC).

  
  

  8141	[T:Deliv Jobs/Svr]
  	These SPs count the total number of jobs (color or black-and-white) scanned and sent to a Scan Router server.
  8145	[S:Deliv Jobs/Svr]
  	These SPs count the number of jobs (color or black-and-white) scanned in scanner mode and sent to a Scan Router server.
  001	B/W	*CTL	[0 to 99999999 / 0 / 1/step]
  002	Color	*CTL	[0 to 99999999 / 0 / 1/step]
  003	ACS	*CTL	[0 to 99999999 / 0 / 1/step]

  
  

• These counters count jobs, not pages.

• The jobs are counted even though the arrival and reception of the jobs at the Scan Router server cannot be confirmed.

• If even one color image is mixed with black-and-white images, then the job is counted as a "Color" job.

• If the job is cancelled during scanning, or if the job is cancelled while the document is waiting to be delivered, the job is not counted.

• If the job is cancelled during sending, it may or may not be counted, depending on what stage of the process had been reached when the job was cancelled.

• Even if several files are combined for sending, the transmission counts as one job.

  
  

  8151	[T:Deliv Jobs/PC]

  	These SPs count the total number of jobs (color or black-and-white) scanned and sent to a folder on a PC (Scan-to-PC). Note: At the present time, 8 151 and 8 155 perform identical counts.
  8155	[S:Deliv Jobs/PC]
  	These SPs count the total number of jobs (color or black-and-white) scanned and sent with Scan-to-PC.
  001	B/W	*CTL	[0 to 99999999 / 0 / 1/step]
  002	Color	*CTL	[0 to 99999999 / 0 / 1/step]
  003	ACS	*CTL	[0 to 99999999 / 0 / 1/step]

  
  

• These counters count jobs, not pages.

• If the job is cancelled during scanning, it is not counted.

• If the job is cancelled while it is waiting to be sent, the job is not counted.

• If the job is cancelled during sending, it may or may not be counted, depending on what stage of the process had been reached when the job was cancelled.

• Even if several files are combined for sending, the transmission counts as one job.

  
  

  8161	[T:PCFAX TX Jobs]	*CTL	These SPs count the number of PC Fax transmission jobs. A job is counted from when it is registered for sending, not when it is sent. [0 to 99999999 / 0 / 1/step] Note: At the present time, these counters perform identical counts.
  8163	[F:PCFAX TX Jobs]	*CTL

  
  

• This counts fax jobs started from a PC using a PC fax application, and sending the data out to the destination from the PC through the copier.

  
  

  8171	[T:Deliv Jobs/WSD]
  	These SPs count the pages scanned by WS.
  8175	[S:Deliv Jobs/WSD]
  	These SPs count the pages scanned by WS.
  001	B/W	*CTL	[0 to 99999999 / 0 / 1/step]

  
  

  8191	[T:Total Scan PGS]	*CTL	These SPs count the pages scanned by
  			each application that uses the scanner
  8192	[C:Total Scan PGS]	*CTL
  			to scan images.
  8193	[F:Total Scan PGS]	*CTL	[0 to 99999999 / 0 / 1]
  8195	[S:Total Scan PGS]	*CTL
  8196	[L:Total Scan PGS]	*CTL

  
  

  Controller SP Mode Tables

  002	Color	*CTL	[0 to 99999999 / 0 / 1/step]
  003	ACS	*CTL	[0 to 99999999 / 0 / 1/step]

  8181	[T:Scan to Media Jobs]
  	These SPs count the scanned pages in a media by the scanner application.
  8185	[S:Scan to Media Jobs]
  	These SPs count the scanned pages in a media by the scanner application.
  001	B/W	*CTL	[0 to 99999999 / 0 / 1/step]
  002	Color	*CTL	[0 to 99999999 / 0 / 1/step]
  003	ACS	*CTL	[0 to 99999999 / 0 / 1/step]

• SP 8 191 to 8 196 count the number of scanned sides of pages, not the number of physical pages.

• These counters do not count reading user stamp data, or reading color charts to adjust color.

• Previews done with a scanner driver are not counted.

• A count is done only after all images of a job have been scanned.

• Scans made in SP mode are not counted.

  Examples

• If 3 B5 pages and 1 A3 page are scanned with the scanner application but not stored, the S: count is 4.

• If both sides of 3 A4 sheets are copied and stored to the document server using the Store File button in the Copy mode window, the C: count is 6 and the L: count is 6.

• If both sides of 3 A4 sheets are copied but not stored, the C: count is 6.

• If you enter document server mode then scan 6 pages, the L: count is 6.

  8201	[T:LSize Scan PGS]	*CTL	[0 to 99999999 / 0 / 1/step]
  	These SPs count the total number of large pages input with the scanner for scan and copy jobs. Large size paper (A3/DLT) scanned for fax transmission are not counted. Note: These counters are displayed in the SMC Report, and in the User Tools display.
  8203	[F: LSize Scan PGS]	*CTL	[0 to 99999999 / 0 / 1/step]
  	These SPs count the total number of large pages input with the scanner for fax transmission. Note: These counters are displayed in the SMC Report, and in the User Tools display.
  8205	[S:LSize Scan PGS]	*CTL	[0 to 99999999 / 0 / 1/step]
  	These SPs count the total number of large pages input with the scanner for scan jobs only. Large size paper (A3/DLT) scanned for fax transmission are not counted. Note: These counters are displayed in the SMC Report, and in the User Tools display.

  
  

  
  

  8211	[T:Scan PGS/LS]	*CTL	These SPs count the number of pages scanned into the document server. [0 to 99999999 / 0 / 1] The L: counter counts the number of pages stored from within the document server mode screen at the operation panel, and with the Store File button from within the Copy mode screen
  8212	[C:Scan PGS/LS]	*CTL
  8213	[F:Scan PGS/LS]	*CTL
  8215	[S:Scan PGS/LS]	*CTL
  8216	[L:Scan PGS/LS]	*CTL

  
  

• Reading user stamp data is not counted.

• If a job is cancelled, the pages output as far as the cancellation are counted.

• If the scanner application scans and stores 3 B5 sheets and 1 A4 sheet, the S: count is 4.

• If pages are copied but not stored on the document server, these counters do not change.

• If both sides of 3 A4 sheets are copied and stored to the document server, the C: count is 6 and the L: count is 6.

• If you enter document server mode then scan 6 pages, the L: count is 6.

  8221	[ADF Org Feeds]
  	These SPs count the number of pages fed through the ADF for front and back side scanning.
  001	Front	*CTL	[0 to 99999999 / 0 / 1/step]
  	Number of front sides fed for scanning: With an ADF that can scan both sides simultaneously, the Front side count is the same as the number of pages fed for either simplex or duplex scanning. With an ADF that cannot scan both sides simultaneously, the Front side count is the same as the number of pages fed for duplex front side scanning. (The front side is determined by which side the user loads face up.)
  002	Back	*CTL	[0 to 99999999 / 0 / 1/step]
  	Number of rear sides fed for scanning: With an ADF that can scan both sides simultaneously, the Back count is the same as the number of pages fed for duplex scanning. With an ADF that cannot scan both sides simultaneously, the Back count is the same as the number of pages fed for duplex rear-side scanning.

  
  

  Controller SP Mode Tables

• When 1 sheet is fed for duplex scanning the Front count is 1 and the Back count is 1.

• If a jam occurs during the job, recovery processing is not counted to avoid double counting. Also, the pages are not counted if the jam occurs before the first sheet is output.

  
  

  8231	[Scan PGS/Mode]
  	These SPs count the number of pages scanned by each ADF mode to determine the work load on the ADF.
  001	Large Volume	*CTL	[0 to 99999999 / 0 / 1/step]
  	Selectable. Large copy jobs that cannot be loaded in the ADF at one time.
  002	SADF	*CTL	[0 to 99999999 / 0 / 1/step]
  	Selectable. Feeding pages one by one through the ADF.
  003	Mixed Size	*CTL	[0 to 99999999 / 0 / 1/step]
  	Selectable. Select "Mixed Sizes" on the operation panel.
  004	Custom Size	*CTL	[0 to 99999999 / 0 / 1/step]

  	Selectable. Originals of non-standard size.
  005	Platen	*CTL	[0 to 99999999 / 0 / 1/step]
  	Book mode. Raising the ADF and placing the original directly on the platen.
  006	Mixed 1side/ 2side	*CTL	[0 to 99999999 / 0 / 1/step]
  	Simplex and Duplex mode.

  
  

• If the scan mode is changed during the job, for example, if the user switches from ADF to Platen mode, the count is done for the last selected mode.

• The user cannot select mixed sizes or non-standard sizes with the fax application so if the original's page sizes are mixed or non-standard, these are not counted.

• If the user selects "Mixed Sizes" for copying in the platen mode, the Mixed Size count is enabled.

• In the SADF mode if the user copies 1 page in platen mode and then copies 2 pages with SADF, the Platen count is 1 and the SADF count is 3.

  
  

  8241	[T:Scan PGS/Org]	*CTL	[0 to 99999999 / 0 / 1 / step
  	These SPs count the total number of scanned pages by original type for all jobs, regardless of which application was used.
  8242	[C:Scan PGS/Org]	*CTL	[0 to 99999999 / 0 / 1 / step
  	These SPs count the number of pages scanned by original type for Copy jobs.
  8243	[F:Scan PGS/Org]	*CTL	[0 to 99999999 / 0 / 1 / step
  	These SPs count the number of pages scanned by original type for Fax jobs.
  8245	[S:Scan PGS/Org]	*CTL	[0 to 99999999 / 0 / 1 / step
  	These SPs count the number of pages scanned by original type for Scan jobs.
  8246	[L:Scan PGS/Org]	*CTL	[0 to 99999999 / 0 / 1 / step
  	These SPs count the number of pages scanned and stored from within the document server mode screen at the operation panel, and with the Store File button from within the Copy mode screen
  		8241	8242	8243	8245	8246
  001	Text	Yes	Yes	Yes	Yes	Yes

  002	Text/Photo	Yes	Yes	Yes	Yes	Yes
  003	Photo	Yes	Yes	Yes	Yes	Yes
  004	GenCopy, Pale	Yes	Yes	No	Yes	Yes
  005	Map	Yes	Yes	No	No	Yes
  006	Normal/Detail	Yes	No	Yes	No	No
  007	Fine/Super Fine	Yes	No	Yes	No	No
  008	Binary	Yes	No	No	Yes	No
  009	Grayscale	Yes	No	No	Yes	No
  010	Color	Yes	No	No	Yes	No
  011	Other	Yes	Yes	Yes	Yes	Yes

  
  

  Controller SP Mode Tables

• If the scan mode is changed during the job, for example, if the user switches from ADF to Platen mode, the count is done for the last selected mode.

  
  

  8251	[T:Scan PGS/ImgEdt]	*CTL	These SPs show how many times
  			Image Edit features have been selected
  8252	[C:Scan PGS/ImgEdt]	*CTL
  			at the operation panel for each
  8255	[S:Scan PGS/ImgEdr]	*CTL	application. Some examples of these
  			editing features are:
  8256	[L:Scan PGS/ImgEdt]	*CTL
  			Erase> Border
  8257	[O:Scan PGS/ImgEdt]	*CTL	Erase> Center
  			Image Repeat
  			Centering
  			Positive/Negative
  			[0 to 99999999 / 0 / 1/step]
  			Note: The count totals the number of
  			times the edit features have been used.
  			A detailed breakdown of exactly which
  			features have been used is not given.

  
  

  The L: counter counts the number of pages stored from within the document server mode screen at the operation panel, and with the Store File button from within the Copy mode screen.

  8261	[T:Scan PGS/ColCr]
  8262	[C:Scan PGS/ ColCr]
  8265	[S:Scn PGS/Color]
  8266	[L:Scn PGS/ColCr]
  	These SPs show how many times color creation features have been selected at the operation panel.
  001	Color Conversion	*CTL	[0 to 99999999 / 0 / 1/step]
  002	Color Erase	*CTL	[0 to 99999999 / 0 / 1/step]
  003	Background	*CTL	[0 to 99999999 / 0 / 1/step]
  004	Other	*CTL	[0 to 99999999 / 0 / 1/step]

  
  

  
  

  8281	[T:Scan PGS/TWAIN]	*CTL	These SPs count the number of pages scanned using a TWAIN driver. These counters reveal how the TWAIN driver is used for delivery functions. [0 to 99999999 / 0 / 1/step] Note: At the present time, these counters perform identical counts.
  8285	[S:Scan PGS/TWAIN]	*CTL

  
  

  
  

  8291	[T:Scan PGS/Stamp]	*CTL	These SPs count the number of pages stamped with the stamp in the ADF unit. [0 to 99999999 / 0 / 1/step] The L: counter counts the number of pages stored from within the document server mode screen at the operation panel, and with the Store File button from within the Copy mode screen
  8293	[F:Scan PGS/Stamp]	*CTL
  8295	[S:Scan PGS/Stamp]	*CTL

  
  

  
  

  8301	[T:Scan PGS/Size]
  	These SPs count by size the total number of pages scanned by all applications. Use these totals to compare original page size (scanning) and output (printing) page size [SP 8-441].

  8302	[C:Scan PGS/Size]
  	These SPs count by size the total number of pages scanned by the Copy application. Use these totals to compare original page size (scanning) and output (printing) page size [SP 8-442].
  8303	[F:Scan PGS/Size]
  	These SPs count by size the total number of pages scanned by the Fax application. Use these totals to compare original page size (scanning) and output page size [SP 8-443].
  8305	[S:Scan PGS/Size]
  	These SPs count by size the total number of pages scanned by the Scan application. Use these totals to compare original page size (scanning) and output page size [SP 8-445].
  8306	[L:Scan PGS/Size]
  	These SPs count by size the total number of pages scanned and stored from within the document server mode screen at the operation panel, and with the Store File button from within the Copy mode screen. Use these totals to compare original page size (scanning) and output page size [SP 8-446].
  001	A3	*CTL	[0 to 99999999 / 0 / 1/step]
  002	A4	*CTL	[0 to 99999999 / 0 / 1/step]
  003	A5	*CTL	[0 to 99999999 / 0 / 1/step]
  004	B4	*CTL	[0 to 99999999 / 0 / 1/step]
  005	B5	*CTL	[0 to 99999999 / 0 / 1/step]
  006	DLT	*CTL	[0 to 99999999 / 0 / 1/step]
  007	LG	*CTL	[0 to 99999999 / 0 / 1/step]
  008	LT	*CTL	[0 to 99999999 / 0 / 1/step]
  009	HLT	*CTL	[0 to 99999999 / 0 / 1/step]
  010	Full Bleed	*CTL	[0 to 99999999 / 0 / 1/step]
  254	Other (Standard)	*CTL	[0 to 99999999 / 0 / 1/step]
  255	Other (Custom)	*CTL	[0 to 99999999 / 0 / 1/step]

  Controller SP Mode Tables

  
  

  8311	T:Scan PGS/Rez	*CTL	[0 to 99999999/ 0 / 1]
  	These SPs count by resolution setting the total number of pages scanned by applications that can specify resolution settings.
  8315	S: Scan PGS/Rez	*CTL	[0 to 99999999/ 0 / 1]
  	These SPs count by resolution setting the total number of pages scanned by applications that can specify resolution settings. Note: At the present time, SP8-311 and SP8-315 perform identical counts.
  001	1200dpi <		*CTL	[0 to 99999999 / 0 / 1/step]
  002	600dpi to 1199dpi		*CTL	[0 to 99999999 / 0 / 1/step]
  003	400dpi to 599dpi		*CTL	[0 to 99999999 / 0 / 1/step]
  004	200dpi to 399dpi		*CTL	[0 to 99999999 / 0 / 1/step]
  005	< 199dpi		*CTL	[0 to 99999999 / 0 / 1/step]

  
  

• Copy resolution settings are fixed so they are not counted.

• The Fax application does not allow finely-adjusted resolution settings so no count is done for the Fax application.

  
  

  8321	[T:Sacn Poster]
  8322	[C:Sacn Poster]
  8326	[L:Sacn Poster]]
  001	2 Sheet	*CTL	[0 to 99999999 / 0 / 1/step]
  002	4 Sheet	*CTL	[0 to 99999999 / 0 / 1/step]
  003	9 Sheet	*CTL	[0 to 99999999 / 0 / 1/step]

  
  

  
  

  8381	[T:Total PrtPGS]	*CTL	These SPs count the number of pages printed by the customer. The counter for the application used for storing the pages increments. [0 to 99999999 / 0 / 1/step]
  8382	[C:Total PrtPGS]	*CTL
  8383	[F:Total PrtPGS]	*CTL
  8384	[P:Total PrtPGS]	*CTL

  8385	[S:Total PrtPGS]	*CTL
  8386	[L:Total PrtPGS]	*CTL
  8387	[O:Total PrtPGS]	*CTL

  
  

  Controller SP Mode Tables

• When the A3/DLT double count function is switched on with SP5104, 1 A3/DLT page is counted as 2.

• When several documents are merged for a print job, the number of pages stored are counted for the application that stored them.

• These counters are used primarily to calculate charges on use of the machine, so the following pages are not counted as printed pages:

  • Blank pages in a duplex printing job.

  • Blank pages inserted as document covers, chapter title sheets, and slip sheets.

  • Reports printed to confirm counts.

  • All reports done in the service mode (service summaries, engine maintenance reports, etc.)

  • Test prints for machine image adjustment.

  • Error notification reports.

  • Partially printed pages as the result of a copier jam.

  
  

  8391	LSize PrtPGS	*CTL	[0 to 99999999 / 0 / 1/step]
  	These SPs count pages printed on paper sizes A3/DLT and larger. Note: In addition to being displayed in the SMC Report, these counters are also displayed in the User Tools display on the copy machine.
  001	A3/DLT, Larger
  003	Bannaer Paper

  
  

  
  

  8401	[T:PrtPGS/LS]	*CTL	These SPs count the number of pages printed from the document server. The counter for the application used to print the pages is incremented. The L: counter counts the number of jobs stored from within the document server mode screen at the operation panel. [0 to 99999999 / 0 / 1/step]
  8402	[C:PrtPGS/LS]	*CTL
  8403	[F:PrtPGS/LS]	*CTL
  8404	[P:PrtPGS/LS]	*CTL
  8405	[S:PrtPGS/LS]	*CTL
  8406	[L:PrtPGS/LS]	*CTL

• Print jobs done with Web Image Monitor and Desk Top Binder are added to the L: count.

• Fax jobs done with Web Image Monitor and Desk Top Binder are added to the F: count.

  
  

  8411

  Prints/Duplex

  *CTL

  This SP counts the amount of paper (front/back counted as 1 page) used for duplex printing. Last pages printed only on one side are not counted. [0 to 99999999 / 0 / 1]

  
  

  
  

  8421	[T:PrtPGS/Dup Comb]
  	These SPs count by binding and combine, and n-Up settings the number of pages processed for printing. This is the total for all applications.
  8422	[C:PrtPGS/Dup Comb]
  	These SPs count by binding and combine, and n-Up settings the number of pages processed for printing by the copier application.
  8423	[F:PrtPGS/Dup Comb]
  	These SPs count by binding and combine, and n-Up settings the number of pages processed for printing by the fax application.
  8424	[P:PrtPGS/Dup Comb]
  	These SPs count by binding and combine, and n-Up settings the number of pages processed for printing by the printer application.
  8425	[S:PrtPGS/Dup Comb]
  	These SPs count by binding and combine, and n-Up settings the number of pages processed for printing by the scanner application.
  8426	[L:PrtPGS/Dup Comb]
  	These SPs count by binding and combine, and n-Up settings the number of pages processed for printing from within the document server mode window at the operation panel.
  8427	[O:PrtPGS/Dup Comb]
  	These SPs count by binding and combine, and n-Up settings the number of pages processed for printing by Other applications

  001	Simplex> Duplex	*CTL	[0 to 99999999 / 0 / 1/step]
  002	Duplex> Duplex	*CTL	[0 to 99999999 / 0 / 1/step]
  003	Book> Duplex	*CTL	[0 to 99999999 / 0 / 1/step]
  004	Simplex Combine	*CTL	[0 to 99999999 / 0 / 1/step]
  005	Duplex Combine	*CTL	[0 to 99999999 / 0 / 1/step]
  006	2in1	*CTL	[0 to 99999999 / 0 / 1/step]
  	2 pages on 1 side (2-Up)
  007	4 in1	*CTL	[0 to 99999999 / 0 / 1/step]
  	4 pages on 1 side (4-Up)
  008	6 in1	*CTL	[0 to 99999999 / 0 / 1/step]
  	6 pages on 1 side (6-Up)
  009	8 in1	*CTL	[0 to 99999999 / 0 / 1/step]
  	8 pages on 1 side (8-Up)
  010	9 in1	*CTL	[0 to 99999999 / 0 / 1/step]
  	9 pages on 1 side (9-Up)
  011	16 in1	*CTL	[0 to 99999999 / 0 / 1/step]
  	16 pages on 1 side (16-Up)
  012	Booklet	*CTL	[0 to 99999999 / 0 / 1/step]
  013	Magazine	*CTL	[0 to 99999999 / 0 / 1/step]
  014	2-in-1 + Booklet	*CTL	[0 to 99999999 / 0 / 1/step]
  015	4-in-1 + Booklet	*CTL	[0 to 99999999 / 0 / 1/step]
  016	6-in-1 + Booklet	*CTL	[0 to 99999999 / 0 / 1/step]
  017	8-in-1 + Booklet	*CTL	[0 to 99999999 / 0 / 1/step]
  018	9-in-1 + Booklet	*CTL	[0 to 99999999 / 0 / 1/step]
  019	2-in-1 + Magazine	*CTL	[0 to 99999999 / 0 / 1/step]
  020	4-in-1 + Magazine	*CTL	[0 to 99999999 / 0 / 1/step]

  Controller SP Mode Tables

  021	6-in-1 + Magazine	*CTL	[0 to 99999999 / 0 / 1/step]
  022	8-in-1 + Magazine	*CTL	[0 to 99999999 / 0 / 1/step]
  023	9-in-1 + Magazine	*CTL	[0 to 99999999 / 0 / 1/step]
  024	16-in-1 + Magazine	*CTL	[0 to 99999999 / 0 / 1/step]

  
  

• These counts (SP8 421 to SP8 427) are especially useful for customers who need to improve their compliance with ISO standards for the reduction of paper consumption.

• Pages that are only partially printed with the n-Up functions are counted as 1 page.

• Here is a summary of how the counters work for Booklet and Magazine modes:

  
  

  Booklet		Magazine
  Original Pages	Count	Original Pages	Count
  1	1	1	1
  2	2	2	2
  3	2	3	2
  4	2	4	2
  5	3	5	4
  6	4	6	4
  7	4	7	4
  8	4	8	4

  
  

  
  

  8431	[T:PrtPGS/ImgEdt]
  	These SPs count the total number of pages output with the three features below, regardless of which application was used.
  8432	[C:PrtPGS/ImgEdt]
  	These SPs count the total number of pages output with the three features below with the copy application.
  8434	[P:PrtPGS/ImgEdt]

  	These SPs count the total number of pages output with the three features below with the print application.
  8436	[L:PrtPGS/ImgEdt]
  	These SPs count the total number of pages output from within the document server mode window at the operation panel with the three features below.
  8437	[O:PrtPGS/ImgEdt]
  	These SPs count the total number of pages output with the three features below with Other applications.
  001	Cover/Slip Sheet	*CTL	[0 to 99999999 / 0 / 1/step]
  	Total number of covers or slip sheets inserted. The count for a cover printed on both sides counts 2.
  002	Series/Book	*CTL	[0 to 99999999 / 0 / 1/step]
  	The number of pages printed in series (one side) or printed as a book with booklet right/left pagination.
  003	User Stamp	*CTL	[0 to 99999999 / 0 / 1/step]
  	The number of pages printed where stamps were applied, including page numbering and date stamping.

  Controller SP Mode Tables

  
  

  
  

  8441	[T:PrtPGS/Ppr Size]
  	These SPs count by print paper size the number of pages printed by all applications.
  8442	[C:PrtPGS/Ppr Size]
  	These SPs count by print paper size the number of pages printed by the copy application.
  8443	[F:PrtPGS/Ppr Size]
  	These SPs count by print paper size the number of pages printed by the fax application.
  8444	[P:PrtPGS/Ppr Size]

  	These SPs count by print paper size the number of pages printed by the printer application.
  8445	[S:PrtPGS/Ppr Size]
  	These SPs count by print paper size the number of pages printed by the scanner application.
  8446	[L:PrtPGS/Ppr Size]
  	These SPs count by print paper size the number of pages printed from within the document server mode window at the operation panel.
  8447	[O:PrtPGS/Ppr Size]
  	These SPs count by print paper size the number of pages printed by Other applications.
  001	A3	*CTL	[0 to 99999999 / 0 / 1/step]
  002	A4	*CTL	[0 to 99999999 / 0 / 1/step]
  003	A5	*CTL	[0 to 99999999 / 0 / 1/step]
  004	B4	*CTL	[0 to 99999999 / 0 / 1/step]
  005	B5	*CTL	[0 to 99999999 / 0 / 1/step]
  006	DLT	*CTL	[0 to 99999999 / 0 / 1/step]
  007	LG	*CTL	[0 to 99999999 / 0 / 1/step]
  008	LT	*CTL	[0 to 99999999 / 0 / 1/step]
  009	HLT	*CTL	[0 to 99999999 / 0 / 1/step]
  010	Full Bleed	*CTL	[0 to 99999999 / 0 / 1/step]
  254	Other (Standard)	*CTL	[0 to 99999999 / 0 / 1/step]
  255	Other (Custom)	*CTL	[0 to 99999999 / 0 / 1/step]

  
  

• These counters do not distinguish between LEF and SEF.

  
  

  8451	[PrtPGS/Ppr Tray]
  	These SPs count the number of sheets fed from each paper feed station.

  001	Bypass Tray	*CTL	Bypass Tray [0 to 99999999 / 0 / 1/step]
  002	Tray 1	*CTL	Copier [0 to 99999999 / 0 / 1/step]
  003	Tray 2	*CTL
  004	Tray 3	*CTL	Paper Tray Unit (Option) [0 to 99999999 / 0 / 1/step]
  005	Tray 4	*CTL
  006	Tray 5	*CTL	Currently not used.
  007	Tray 6	*CTL	Currently not used.
  008	Tray 7	*CTL	Currently not used.
  009	Tray 8	*CTL	Currently not used.
  010	Tray 9	*CTL	Currently not used.
  011	Tray 10	*CTL	Currently not used.
  012	Tray 11	*CTL	Currently not used.
  013	Tray 12	*CTL	Currently not used.
  014	Tray 13	*CTL	Currently not used.
  015	Tray 14	*CTL	Currently not used.
  016	Tray 15	*CTL	Currently not used.

  Controller SP Mode Tables

  
  

  
  

  8461	[T:PrtPGS/Ppr Type]
  	These SPs count by paper type the number pages printed by all applications.
  8462	[C:PrtPGS/Ppr Type]
  	These SPs count by paper type the number pages printed by the copy application.

  • These counters are not the same as the PM counter. The PM counter is based on feed timing to accurately measure the service life of the feed rollers. However, these counts are based on output timing.

  • Blank sheets (covers, chapter covers, slip sheets) are also counted.

  • During duplex printing, pages printed on both sides count as 1, and a page printed on one side counts as 1.

  8463	[F:PrtPGS/Ppr Type]
  	These SPs count by paper type the number pages printed by the fax application.
  8464	[P:PrtPGS/Ppr Type]
  	These SPs count by paper type the number pages printed by the printer application.
  8466	[L:PrtPGS/Ppr Type]
  	These SPs count by paper type the number pages printed from within the document server mode window at the operation panel.
  001	Normal	*CTL	[0 to 99999999 / 0 / 1/step]
  002	Recycled	*CTL	[0 to 99999999 / 0 / 1/step]
  003	Special	*CTL	[0 to 99999999 / 0 / 1/step]
  004	Thick	*CTL	[0 to 99999999 / 0 / 1/step]
  005	Normal (Back)	*CTL	[0 to 99999999 / 0 / 1/step]
  006	Thick (Back)	*CTL	[0 to 99999999 / 0 / 1/step]
  007	OHP	*CTL	[0 to 99999999 / 0 / 1/step]
  008	Other	*CTL	[0 to 99999999 / 0 / 1/step]

  
  

  
  

  8471	[PrtPGS/Mag]
  	These SPs count by magnification rate the number of pages printed.
  001	< 49%	*CTL	[0 to 99999999 / 0 / 1/step]
  002	50% to 99%	*CTL
  003	100%	*CTL
  004	101% to 200%	*CTL
  005	201% <	*CTL

  
  

  Counts are done for magnification adjusted for pages, not only on the operation panel but performed remotely with an external network application capable of performing magnification

  Controller SP Mode Tables

  adjustment as well.

  Magnification adjustments done with printer drivers with PC applications such as Excel are also counted.

  Magnification adjustments done for adjustments after they have been stored on the document server are not counted.

  Magnification adjustments performed automatically during Auto Reduce/Enlarge copying are counted.

  The magnification rates of blank cover sheets, slip sheets, etc. are automatically assigned a rate of 100%.

  
  

  8481	[T:PrtPGS/TonSave]	*CTL	[0 to 99999999 / 0 / 1/step]
  8484	[P:PrtPGS/TonSave]	*CTL
  	These SPs count the number of pages printed with the Toner Save feature switched on. Note: These SPs return the same results as this SP is limited to the Print application.

  
  

  
  

  8491	[T:PrtPGS/Col Mode]
  8492	[C:PrtPGS/Col Mode]
  8493	[F:PrtPGS/Col Mode]
  8496	[L:PrtPGS/Col Mode]
  8497	[O:PrtPGS/Col Mode]
  001	B/W	*CTL	These SPs count the number of pages printed in the Color Mode by each application.
  002	Single Color	*CTL
  003	Two Color	*CTL
  004	Full Color	*CTL
  051	B/W(Banner)	*CTL
  052	Single Color(Banner)	*CTL
  053	Two Color(Banner)	*CTL
  054	Full Color	*CTL

  8501	[T:PrtPGS/Col Mode]
  8504	[P:PrtPGS/Col Mode]
  8507	[O:PrtPGS/Col Mode]
  001	B/W	*CTL	These SPs count the number of pages printed in the Color Mode by the print application.
  002	Mono Color	*CTL
  003	Full Color	*CTL
  004	Single Color	*CTL
  005	Two Color	*CTL
  051	B/W(Banner)	*CTL
  052	Full Color(Banner)	*CTL
  053	Single Color(Banner)	*CTL
  054	Two Color(Banner)	*CTL

  
  

  
  

  8511	[T:PrtPGS/Emul]
  	These SPs count by printer emulation mode the total number of pages printed.
  8514	[P:PrtPGS/Emul]
  	These SPs count by printer emulation mode the total number of pages printed.
  001	RPCS	*CTL	[0 to 99999999 / 0 / 1/step]
  002	RPDL	*CTL	[0 to 99999999 / 0 / 1/step]
  003	PS3	*CTL	[0 to 99999999 / 0 / 1/step]
  004	R98	*CTL	[0 to 99999999 / 0 / 1/step]
  005	R16	*CTL	[0 to 99999999 / 0 / 1/step]
  006	GL/GL2	*CTL	[0 to 99999999 / 0 / 1/step]
  007	R55	*CTL	[0 to 99999999 / 0 / 1/step]
  008	RTIFF	*CTL	[0 to 99999999 / 0 / 1/step]

  009	PDF	*CTL	[0 to 99999999 / 0 / 1/step]
  010	PCL5e/5c	*CTL	[0 to 99999999 / 0 / 1/step]
  011	PCL XL	*CTL	[0 to 99999999 / 0 / 1/step]
  012	IPDL-C	*CTL	[0 to 99999999 / 0 / 1/step]
  013	BM-Links	*CTL	Japan Only
  014	Other	*CTL	[0 to 99999999 / 0 / 1/step]
  015	IPDS	*CTL	[0 to 99999999 / 0 / 1/step]
  016	XPS	*CTL	[0 to 99999999 / 0 / 1/step]

  
  

  Controller SP Mode Tables

• SP8 511 and SP8 514 return the same results as they are both limited to the Print application.

• Print jobs output to the document server are not counted.

  
  

  8521	[T:PrtPGS/FIN]
  	These SPs count by finishing mode the total number of pages printed by all applications.
  8522	[C:PrtPGS/FIN]
  	These SPs count by finishing mode the total number of pages printed by the Copy application.
  8523	[F:PrtPGS/FIN]
  	These SPs count by finishing mode the total number of pages printed by the Fax application. NOTE: Print finishing options for received faxes are currently not available.
  8524	[P:PrtPGS/FIN]
  	These SPs count by finishing mode the total number of pages printed by the Print application.
  8525	[S:PrtPGS/FIN]
  	These SPs count by finishing mode the total number of pages printed by the Scanner application.
  8526	[L:PrtPGS/FIN]

  	These SPs count by finishing mode the total number of pages printed from within the document server mode window at the operation panel.
  001	Sort	*CTL	[0 to 99999999 / 0 / 1/step]
  002	Stack	*CTL	[0 to 99999999 / 0 / 1/step]
  003	Staple	*CTL	[0 to 99999999 / 0 / 1/step]
  004	Booklet	*CTL	[0 to 99999999 / 0 / 1/step]
  005	Z-Fold	*CTL	[0 to 99999999 / 0 / 1/step]
  006	Punch	*CTL	[0 to 99999999 / 0 / 1/step]
  007	Other	*CTL	[0 to 99999999 / 0 / 1/step]
  008	Inside Fold	*CTL	[0 to 99999999 / 0 / 1/step]
  	Half-Fold (FM2) (Multi Fold Unit)
  009	Three-IN-Fold	*CTL	[0 to 99999999 / 0 / 1/step]
  	Letter Fold-in (FM4) (Multi Fold Unit)
  010	Three-OUT-Fold	*CTL	[0 to 99999999 / 0 / 1/step]
  	Letter Fold-out (FM3) (Multi Fold Unit)
  011	Four Fold	*CTL	[0 to 99999999 / 0 / 1/step]
  	Double Parallel Fold (FM5) (Multi Fold Unit)
  012	KANNON-Fold	*CTL	[0 to 99999999 / 0 / 1/step]
  	Gate Fold (FM6) (Multi Fold Unit)
  013	Perfect-Bind	*CTL	[0 to 99999999 / 0 / 1/step]
  	Perfect Binder
  014	Ring-Bind	*CTL	[0 to 99999999 / 0 / 1/step]
  	Ring Binder
  015	3rd Vendor	*CTL	[0 to 99999999 / 0 / 1/step]

  
  

  • If stapling is selected for finishing and the stack is too large for stapling, the unstapled

    Controller SP Mode Tables

    pages are still counted.

  • The counts for staple finishing are based on output to the staple tray, so jam recoveries are counted.

Controller SP Mode Tables

Controller SP Mode Tables