Ricoh MP C2004/C2504 Service Manual Part 33

Table of contents:
< Previous page: Part 32 | You are viewing page: Part 33 | Next page: Part 34 >

7-944-049

# Dev Unit:M

*ENG

[0 to 4294967295 / 0 / 1mm/step]

7-944-050

Developer:M

*ENG

[0 to 4294967295 / 0 / 1mm/step]

7-944-071

# PCU:Y

*ENG

[0 to 4294967295 / 0 / 1mm/step]

7-944-072

# Dev Unit:Y

*ENG

[0 to 4294967295 / 0 / 1mm/step]

7-944-073

Developer:Y

*ENG

[0 to 4294967295 / 0 / 1mm/step]

7-944-093

# ITB Unit

*ENG

[0 to 4294967295 / 0 / 1mm/step]

7-944-102

# ITB Cleaning Unit

ENG

[0 to 4294967295 / 0 / 1mm/step]

7-944-109

# PTR Unit

ENG

[0 to 4294967295 / 0 / 1mm/step]

7-944-115

# Fusing Unit

ENG

[0 to 4294967295 / 0 / 1mm/step]

7-944-116

Fusing Belt

ENG

[0 to 4294967295 / 0 / 1mm/step]

7-944-118

Pressure Roller

ENG

[0 to 4294967295 / 0 / 1mm/step]

7-944-230

Low Speed: # PCU:K

ENG

[0 to 4294967295 / 0 / 1mm/step]

7-944-231

Low Speed: # PCU:C

ENG

[0 to 4294967295 / 0 / 1mm/step]

7-944-232

Low Speed: # PCU:M

ENG

[0 to 4294967295 / 0 / 1mm/step]

7-944-233

Low Speed: # PCU:Y

ENG

[0 to 4294967295 / 0 / 1mm/step]

7-944-234

Middle Speed: # PCU:K

ENG

[0 to 4294967295 / 0 / 1mm/step]

7-944-235

Middle Speed: # PCU:C

ENG

[0 to 4294967295 / 0 / 1mm/step]

7-944-236

Middle Speed: # PCU:M

ENG

[0 to 4294967295 / 0 / 1mm/step]

7-944-237

Middle Speed: # PCU:Y

ENG

[0 to 4294967295 / 0 / 1mm/step]

7950

[Unit Replacement Date]

7-950-002

# PCU:K

*ENG

[- / 0 / -]

7-950-003

# Dev Unit:K

*ENG

[- / 0 / -]

7-950-004

Developer:K

*ENG

[- / 0 / -]

7-950-025

# PCU:C

*ENG

[- / 0 / -]

7-950-026

# Dev Unit:C

*ENG

[- / 0 / -]

7-950-027

Developer:C

*ENG

[- / 0 / -]

7-950-048

# PCU:M

*ENG

[- / 0 / -]

7-950-049

# Dev Unit:M

*ENG

[- / 0 / -]

7-950-050

Developer:M

*ENG

[- / 0 / -]

7-950-071

# PCU:Y

*ENG

[- / 0 / -]

7-950-072

# Dev Unit:Y

*ENG

[- / 0 / -]

7-950-073

Developer:Y

*ENG

[- / 0 / -]

7-950-093

# ITB Unit

*ENG

[- / 0 / -]

7-950-102

# ITB Cleaning Unit

*ENG

[- / 0 / -]

7-950-109

# PTR Unit

*ENG

[- / 0 / -]

7-950-115

# Fusing Unit

*ENG

[- / 0 / -]

7-950-116

Fusing Belt

*ENG

[- / 0 / -]

7-950-118

Pressure Roller

*ENG

[- / 0 / -]

7-950-131

Dust Filter

*ENG

[- / 0 / -]

7-950-142

Waste Toner Bottle

*ENG

[- / 0 / -]

7-950-206

ADF Pick-up Roller

*ENG

[- / 0 / -]

7-950-207

ADF Supply Belt

*ENG

[- / 0 / -]

7-950-208

ADF Reverse Roller

*ENG

[- / 0 / -]

Engine SP Mode Tables



7951

[Remain Day Counter: Pages]

7-951-002

# PCU:K

ENG

[0 to 255 / 255 / 1day/step]

7-951-003

# Dev Unit:K

ENG

[0 to 255 / 255 / 1day/step]

7-951-004

Developer:K

ENG

[0 to 255 / 255 / 1day/step]

7-951-025

# PCU:C

ENG

[0 to 255 / 255 / 1day/step]

7-951-026

# Dev Unit:C

ENG

[0 to 255 / 255 / 1day/step]

7-951-027

Developer:C

ENG

[0 to 255 / 255 / 1day/step]

7-951-048

# PCU:M

ENG

[0 to 255 / 255 / 1day/step]

7-951-049

# Dev Unit:M

ENG

[0 to 255 / 255 / 1day/step]

7-951-050

Developer:M

ENG

[0 to 255 / 255 / 1day/step]

7-951-071

# PCU:Y

ENG

[0 to 255 / 255 / 1day/step]

7-951-072

# Dev Unit:Y

ENG

[0 to 255 / 255 / 1day/step]

7-951-073

Developer:Y

ENG

[0 to 255 / 255 / 1day/step]

7-951-093

# ITB Unit

ENG

[0 to 255 / 255 / 1day/step]

7-951-102

# ITB Cleaning Unit

ENG

[0 to 255 / 255 / 1day/step]

7-951-109

# PTR Unit

ENG

[0 to 255 / 255 / 1day/step]

7-951-115

# Fusing Unit

ENG

[0 to 255 / 255 / 1day/step]

7-951-116

Fusing Belt

ENG

[0 to 255 / 255 / 1day/step]

7-951-118

Pressure Roller

ENG

[0 to 255 / 255 / 1day/step]

7-951-131

Dust Filter

ENG

[0 to 255 / 255 / 1day/step]

7-951-142

Waste Toner Bottle

ENG

[0 to 255 / 255 / 1day/step]

7-951-206

ADF Pick-up Roller

ENG

[0 to 255 / 255 / 1day/step]

7-951-207

ADF Supply Belt

ENG

[0 to 255 / 255 / 1day/step]

7-951-208

ADF Reverse Roller

ENG

[0 to 255 / 255 / 1day/step]



7952

[Remain Day Counter: Distance]

7-952-002

# PCU:K

ENG

[0 to 255 / 255 / 1day/step]

7-952-003

# Dev Unit:K

ENG

[0 to 255 / 255 / 1day/step]

7-952-004

Developer:K

ENG

[0 to 255 / 255 / 1day/step]

7-952-025

# PCU:C

ENG

[0 to 255 / 255 / 1day/step]

7-952-026

# Dev Unit:C

ENG

[0 to 255 / 255 / 1day/step]

7-952-027

Developer:C

ENG

[0 to 255 / 255 / 1day/step]

7-952-048

# PCU:M

ENG

[0 to 255 / 255 / 1day/step]

7-952-049

# Dev Unit:M

ENG

[0 to 255 / 255 / 1day/step]

7-952-050

Developer:M

ENG

[0 to 255 / 255 / 1day/step]

7-952-071

# PCU:Y

ENG

[0 to 255 / 255 / 1day/step]

7-952-072

# Dev Unit:Y

ENG

[0 to 255 / 255 / 1day/step]

7-952-073

Developer:Y

ENG

[0 to 255 / 255 / 1day/step]

7-952-093

# ITB Unit

ENG

[0 to 255 / 255 / 1day/step]

7-952-102

# ITB Cleaning Unit

ENG

[0 to 255 / 255 / 1day/step]

7-952-109

# PTR Unit

ENG

[0 to 255 / 255 / 1day/step]

7-952-115

# Fusing Unit

ENG

[0 to 255 / 255 / 1day/step]

7-952-116

Fusing Belt

ENG

[0 to 255 / 255 / 1day/step]

7-952-118

Pressure Roller

ENG

[0 to 255 / 255 / 1day/step]

Engine SP Mode Tables



7953

[Operation Env. Log: PCU: K]

7-953-001

T<=0

ENG

[0 to 999999999 / 0 / 1mm/step]

7-953-002

0<T<=5:0<=H<30

ENG

[0 to 999999999 / 0 / 1mm/step]

7-953-003

0<T<=5:30<=H<70

ENG

[0 to 999999999 / 0 / 1mm/step]

7-953-004

0<T<=5:70<=H<=100

ENG

[0 to 999999999 / 0 / 1mm/step]

7-953-005

5<T<15:0<=H<30

ENG

[0 to 999999999 / 0 / 1mm/step]

7-953-006

5<T<15:30<=H<55

ENG

[0 to 999999999 / 0 / 1mm/step]

7-953-007

5<T<15:55<=H<80

ENG

[0 to 999999999 / 0 / 1mm/step]

7-953-008

5<T<15:80<=H<=100

ENG

[0 to 999999999 / 0 / 1mm/step]

7-953-009

15<=T<25:0<=H<30

ENG

[0 to 999999999 / 0 / 1mm/step]

7-953-010

15<=T<25:30<=H<55

ENG

[0 to 999999999 / 0 / 1mm/step]

7-953-011

15<=T<25:55<=H<80

ENG

[0 to 999999999 / 0 / 1mm/step]

7-953-012

15<=T<25:80<=H<=100

ENG

[0 to 999999999 / 0 / 1mm/step]

7-953-013

25<=T<30:0<=H<30

ENG

[0 to 999999999 / 0 / 1mm/step]

7-953-014

25<=T<30:30<=H<55

ENG

[0 to 999999999 / 0 / 1mm/step]

7-953-015

25<=T<30:55<=H<80

ENG

[0 to 999999999 / 0 / 1mm/step]

7-953-016

25<=T<30:80<=H<=100

ENG

[0 to 999999999 / 0 / 1mm/step]

7-953-017

30<=T:0<=H<30

ENG

[0 to 999999999 / 0 / 1mm/step]

7-953-018

30<=T:30<=H<55

ENG

[0 to 999999999 / 0 / 1mm/step]

7-953-019

30<=T:55<=H<80

ENG

[0 to 999999999 / 0 / 1mm/step]

7-953-020

30<=T:80<=H<=100

ENG

[0 to 999999999 / 0 / 1mm/step]

7-953-021

35<=T:0<=H<=100

ENG

[0 to 999999999 / 0 / 1mm/step]

7953

[Operation Env. Log Clear]

7-953-100


ENG

[0 to 1 / 0 / 1/step]



7954

[PM Counter Display: Pages (%)]

7-954-002

# PCU:K

ENG

[0 to 255 / 0 / 1%/step]

7-954-003

# Dev Unit:K

ENG

[0 to 255 / 0 / 1%/step]

7-954-004

Developer:K

ENG

[0 to 255 / 0 / 1%/step]

7-954-025

# PCU:C

ENG

[0 to 255 / 0 / 1%/step]

7-954-026

# Dev Unit:C

ENG

[0 to 255 / 0 / 1%/step]

7-954-027

Developer:C

ENG

[0 to 255 / 0 / 1%/step]

7-954-048

# PCU:M

ENG

[0 to 255 / 0 / 1%/step]

7-954-049

# Dev Unit:M

ENG

[0 to 255 / 0 / 1%/step]

7-954-050

Developer:M

ENG

[0 to 255 / 0 / 1%/step]

7-954-071

# PCU:Y

ENG

[0 to 255 / 0 / 1%/step]

7-954-072

# Dev Unit:Y

ENG

[0 to 255 / 0 / 1%/step]

7-954-073

Developer:Y

ENG

[0 to 255 / 0 / 1%/step]

7-954-093

# ITB Unit

ENG

[0 to 255 / 0 / 1%/step]

7-954-102

# ITB Cleaning Unit

ENG

[0 to 255 / 0 / 1%/step]

7-954-109

# PTR Unit

ENG

[0 to 255 / 0 / 1%/step]

7-954-115

# Fusing Unit

ENG

[0 to 255 / 0 / 1%/step]

7-954-116

Fusing Belt

ENG

[0 to 255 / 0 / 1%/step]

7-954-118

Pressure Roller

ENG

[0 to 255 / 0 / 1%/step]

7-954-131

Dust Filter

ENG

[0 to 255 / 0 / 1%/step]

7-954-142

Waste Toner Bottle

ENG

[0 to 255 / 0 / 1%/step]

7-954-206

ADF Pick-up Roller

ENG

[0 to 255 / 0 / 1%/step]

7-954-207

ADF Supply Belt

ENG

[0 to 255 / 0 / 1%/step]

7-954-208

ADF Reverse Roller

ENG

[0 to 255 / 0 / 1%/step]

Engine SP Mode Tables



7955

[Estimated Remain Pages]

7-955-002

# PCU:K

ENG

[0 to 9999999 / 0 / 1page/step]

7-955-003

# Dev Unit:K

ENG

[0 to 9999999 / 0 / 1page/step]

7-955-004

Developer:K

ENG

[0 to 9999999 / 0 / 1page/step]

7-955-025

# PCU:C

ENG

[0 to 9999999 / 0 / 1page/step]

7-955-026

# Dev Unit:C

ENG

[0 to 9999999 / 0 / 1page/step]

7-955-027

Developer:C

ENG

[0 to 9999999 / 0 / 1page/step]

7-955-048

# PCU:M

ENG

[0 to 9999999 / 0 / 1page/step]

7-955-049

# Dev Unit:M

ENG

[0 to 9999999 / 0 / 1page/step]

7-955-050

Developer:M

ENG

[0 to 9999999 / 0 / 1page/step]

7-955-071

# PCU:Y

ENG

[0 to 9999999 / 0 / 1page/step]

7-955-072

# Dev Unit:Y

ENG

[0 to 9999999 / 0 / 1page/step]

7-955-073

Developer:Y

ENG

[0 to 9999999 / 0 / 1page/step]

7-955-093

# ITB Unit

ENG

[0 to 9999999 / 0 / 1page/step]

7-955-102

# ITB Cleaning Unit

ENG

[0 to 9999999 / 0 / 1page/step]

7-955-109

# PTR Unit

ENG

[0 to 9999999 / 0 / 1page/step]

7-955-115

# Fusing Unit

ENG

[0 to 9999999 / 0 / 1page/step]

7-955-116

Fusing Belt

ENG

[0 to 9999999 / 0 / 1page/step]

7-955-118

Pressure Roller

ENG

[0 to 9999999 / 0 / 1page/step]



7956

[Estimated Remain Days]

7-956-002

# PCU:K

ENG

[0 to 255 / 255 / 1day/step]

7-956-003

# Dev Unit:K

ENG

[0 to 255 / 255 / 1day/step]

7-956-004

Developer:K

ENG

[0 to 255 / 255 / 1day/step]

7-956-025

# PCU:C

ENG

[0 to 255 / 255 / 1day/step]

7-956-026

# Dev Unit:C

ENG

[0 to 255 / 255 / 1day/step]

7-956-027

Developer:C

ENG

[0 to 255 / 255 / 1day/step]

7-956-048

# PCU:M

ENG

[0 to 255 / 255 / 1day/step]

7-956-049

# Dev Unit:M

ENG

[0 to 255 / 255 / 1day/step]

7-956-050

Developer:M

ENG

[0 to 255 / 255 / 1day/step]

7-956-071

# PCU:Y

ENG

[0 to 255 / 255 / 1day/step]

7-956-072

# Dev Unit:Y

ENG

[0 to 255 / 255 / 1day/step]

7-956-073

Developer:Y

ENG

[0 to 255 / 255 / 1day/step]

7-956-093

# ITB Unit

ENG

[0 to 255 / 255 / 1day/step]

7-956-102

# ITB Cleaning Unit

ENG

[0 to 255 / 255 / 1day/step]

7-956-109

# PTR Unit

ENG

[0 to 255 / 255 / 1day/step]

7-956-115

# Fusing Unit

ENG

[0 to 255 / 255 / 1day/step]

7-956-116

Fusing Belt

ENG

[0 to 255 / 255 / 1day/step]

7-956-118

Pressure Roller

ENG

[0 to 255 / 255 / 1day/step]

7-956-131

Dust Filter

ENG

[0 to 255 / 255 / 1day/step]

7-956-142

Waste Toner Bottle

ENG

[0 to 255 / 255 / 1day/step]

7-956-206

ADF Pick-up Roller

ENG

[0 to 255 / 255 / 1day/step]

7-956-207

ADF Supply Belt

ENG

[0 to 255 / 255 / 1day/step]

7957

[Monthly Average Pages]

7-957-002

# PCU:K

ENG

[0 to 9999999 / 0 / 1page/step]

7-957-003

# Dev Unit:K

ENG

[0 to 9999999 / 0 / 1page/step]

7-957-004

Developer:K

ENG

[0 to 9999999 / 0 / 1page/step]

7-957-025

# PCU:C

ENG

[0 to 9999999 / 0 / 1page/step]

7-957-026

# Dev Unit:C

ENG

[0 to 9999999 / 0 / 1page/step]

7-957-027

Developer:C

ENG

[0 to 9999999 / 0 / 1page/step]

7-957-048

# PCU:M

ENG

[0 to 9999999 / 0 / 1page/step]

7-957-049

# Dev Unit:M

ENG

[0 to 9999999 / 0 / 1page/step]

7-957-050

Developer:M

ENG

[0 to 9999999 / 0 / 1page/step]

7-957-071

# PCU:Y

ENG

[0 to 9999999 / 0 / 1page/step]

7-957-072

# Dev Unit:Y

ENG

[0 to 9999999 / 0 / 1page/step]

7-957-073

Developer:Y

ENG

[0 to 9999999 / 0 / 1page/step]

7-957-093

# ITB Unit

ENG

[0 to 9999999 / 0 / 1page/step]

7-957-102

# ITB Cleaning Unit

ENG

[0 to 9999999 / 0 / 1page/step]

7-957-109

# PTR Unit

ENG

[0 to 9999999 / 0 / 1page/step]

7-957-115

# Fusing Unit

ENG

[0 to 9999999 / 0 / 1page/step]

7-957-116

Fusing Belt

ENG

[0 to 9999999 / 0 / 1page/step]

7-957-118

Pressure Roller

ENG

[0 to 9999999 / 0 / 1page/step]

7-956-208

ADF Reverse Roller

ENG

[0 to 255 / 255 / 1day/step]

Engine SP Mode Tables


7958

[PM Value Setting:DaysThreshold]

7-958-002

# PCU:K

ENG

[1 to 30 / 15 / 1day/step]

7-958-003

# Dev Unit:K

ENG

[1 to 30 / 15 / 1day/step]

7-958-004

Developer:K

ENG

[1 to 30 / 15 / 1day/step]

7-958-025

# PCU:C

ENG

[1 to 30 / 15 / 1day/step]

7-958-026

# Dev Unit:C

ENG

[1 to 30 / 15 / 1day/step]

7-958-027

Developer:C

ENG

[1 to 30 / 15 / 1day/step]

7-958-048

# PCU:M

ENG

[1 to 30 / 15 / 1day/step]

7-958-049

# Dev Unit:M

ENG

[1 to 30 / 15 / 1day/step]

7-958-050

Developer:M

ENG

[1 to 30 / 15 / 1day/step]

7-958-071

# PCU:Y

ENG

[1 to 30 / 15 / 1day/step]

7-958-072

# Dev Unit:Y

ENG

[1 to 30 / 15 / 1day/step]

7-958-073

Developer:Y

ENG

[1 to 30 / 15 / 1day/step]

7-958-093

# ITB Unit

ENG

[1 to 30 / 15 / 1day/step]

7-958-102

# ITB Cleaning Unit

ENG

[1 to 30 / 15 / 1day/step]

7-958-109

# PTR Unit

ENG

[1 to 30 / 15 / 1day/step]

7-958-115

# Fusing Unit

ENG

[1 to 30 / 15 / 1day/step]

7-958-116

Fusing Belt

ENG

[1 to 30 / 15 / 1day/step]

7-958-118

Pressure Roller

ENG

[1 to 30 / 15 / 1day/step]

7-958-131

Dust Filter

ENG

[1 to 30 / 15 / 1day/step]

7-958-142

Waste Toner Bottle

ENG

[1 to 30 / 15 / 1day/step]

7-958-206

ADF Pick-up Roller

ENG

[1 to 30 / 15 / 1day/step]

7-958-207

ADF Supply Belt

ENG

[1 to 30 / 15 / 1day/step]

7-958-208

ADF Reverse Roller

ENG

[1 to 30 / 15 / 1day/step]



7959

[Fusing: Stop]

7-959-001

Near End: Page

ENG

[0 to 99999999 / 244000 /

1page/step]

7-959-002

End: Page

ENG

[0 to 99999999 / 248000 /

1page/step]

7-959-003

Near End: Rotation

ENG

[0 to 999999999 / 302229000 /

1mm/step]

7-959-004

End: Rotation

ENG

[0 to 999999999 / 313153000 /

1mm/step]

Engine SP Mode Tables



7960

[Estimated Usage Rate]

7-960-002

# PCU:K

ENG

[0 to 255 / 0 / 1%/step]

7-960-003

# Dev Unit:K

ENG

[0 to 255 / 0 / 1%/step]

7-960-004

Developer:K

ENG

[0 to 255 / 0 / 1%/step]

7-960-025

# PCU:C

ENG

[0 to 255 / 0 / 1%/step]

7-960-026

# Dev Unit:C

ENG

[0 to 255 / 0 / 1%/step]

7-960-027

Developer:C

ENG

[0 to 255 / 0 / 1%/step]

7-960-048

# PCU:M

ENG

[0 to 255 / 0 / 1%/step]

7-960-049

# Dev Unit:M

ENG

[0 to 255 / 0 / 1%/step]

7-960-050

Developer:M

ENG

[0 to 255 / 0 / 1%/step]

7-960-071

# PCU:Y

ENG

[0 to 255 / 0 / 1%/step]

7-960-072

# Dev Unit:Y

ENG

[0 to 255 / 0 / 1%/step]

7-960-073

Developer:Y

ENG

[0 to 255 / 0 / 1%/step]

7-960-093

# ITB Unit

ENG

[0 to 255 / 0 / 1%/step]

7-960-102

# ITB Cleaning Unit

ENG

[0 to 255 / 0 / 1%/step]

7-960-109

# PTR Unit

ENG

[0 to 255 / 0 / 1%/step]

7-960-115

# Fusing Unit

ENG

[0 to 255 / 0 / 1%/step]

7-960-116

Fusing Belt

ENG

[0 to 255 / 0 / 1%/step]

7-960-118

Pressure Roller

ENG

[0 to 255 / 0 / 1%/step]

7-960-131

Dust Filter

ENG

[0 to 255 / 0 / 1%/step]

7-960-142

Waste Toner Bottle

ENG

[0 to 255 / 0 / 1%/step]

7-960-206

ADF Pick-up Roller

ENG

[0 to 255 / 0 / 1%/step]

7-960-207

ADF Supply Belt

ENG

[0 to 255 / 0 / 1%/step]

7-960-208

ADF Reverse Roller

ENG

[0 to 255 / 0 / 1%/step]



7979

[ENG Reset Log]


7-979-001

Data1

*ENG

[0x00 to 0xFF / 0x00 / 1/step]

7-979-002

Data2

*ENG

[0x0000 to 0xFFFF / 0x0000 / 1/step]

7-979-003

Data3

*ENG

[0x0000 to 0xFFFF / 0x0000 / 1/step]

7-979-004

Data4

*ENG

[0x0000 to 0xFFFF / 0x0000 / 1/step]

7-979-005

Data5

*ENG

[0x0000 to 0xFFFF / 0x0000 / 1/step]

7-979-006

Data6

*ENG

[0x0000 to 0xFFFF / 0x0000 / 1/step]

7-979-007

Data7

*ENG

[0x0000 to 0xFFFF / 0x0000 / 1/step]

7-979-008

Data8

*ENG

[0x0000 to 0xFFFF / 0x0000 / 1/step]

7-979-009

Data9

*ENG

[0x0000 to 0xFFFF / 0x0000 / 1/step]

7-979-010

Data10

*ENG

[0x0000 to 0xFFFF / 0x0000 / 1/step]

7-979-011

Data11

*ENG

[0x0000 to 0xFFFF / 0x0000 / 1/step]

7-979-012

Data12

*ENG

[0x0000 to 0xFFFF / 0x0000 / 1/step]

7-979-013

Data13

*ENG

[0x0000 to 0xFFFF / 0x0000 / 1/step]

7-979-014

Data14

*ENG

[0x0000 to 0xFFFF / 0x0000 / 1/step]

7-979-015

Data15

*ENG

[0x0000 to 0xFFFF / 0x0000 / 1/step]

7-979-016

Data16

*ENG

[0x0000 to 0xFFFF / 0x0000 / 1/step]

7-979-017

Data17

*ENG

[0x0000 to 0xFFFF / 0x0000 / 1/step]

7-979-018

Data18

*ENG

[0x0000 to 0xFFFF / 0x0000 / 1/step]

7-979-019

Data19

*ENG

[0x0000 to 0xFFFF / 0x0000 / 1/step]

7-979-020

Data20

*ENG

[0x0000 to 0xFFFF / 0x0000 / 1/step]

7-979-021

Data21

*ENG

[0x0000 to 0xFFFF / 0x0000 / 1/step]

7980

[Current for Torque Calculation]

7-980-001

OPCTransferMotor

*ENG

[0 to 9.999 / 0 / 0.001A/step]

7-980-002

BkDevMotor

*ENG

[0 to 9.999 / 0 / 0.001A/step]

7-980-003

ColorOpcMotor

*ENG

[0 to 9.999 / 0 / 0.001A/step]

7-980-004

ColorDevMotor

*ENG

[0 to 9.999 / 0 / 0.001A/step]

7-980-005

FusingMotor

*ENG

[0 to 9.999 / 0 / 0.001A/step]

Engine SP Mode Tables



7981

[Edict:OffsetValueForTorqCalcu]

7-981-001

ManualExe

ENG

[0 or 1 / 0 / 1/step]



7982

[OffsetValueForTorqCalculation]

7-982-001

OPCTransferMotor

*ENG

[0 to 655.35 / 0 / 0.01/step]

7-982-002

BkDevMotor

*ENG

[0 to 655.35 / 0 / 0.01/step]

7-982-003

ColorOpcMotor

*ENG

[0 to 655.35 / 0 / 0.01/step]

7-982-004

ColorDevMotor

*ENG

[0 to 655.35 / 0 / 0.01/step]

7-982-005

FusingMotor

*ENG

[0 to 655.35 / 0 / 0.01/step]



7983

[OutputLevel1CountNo.]


7-983-001

OPCTransferMotor

*ENG

[0 to 65535 / 0 / 1count/step]

7-983-002

BkDevMotor

*ENG

[0 to 65535 / 0 / 1count/step]

7-983-003

ColorOpcMotor

*ENG

[0 to 65535 / 0 / 1count/step]

7-983-004

ColorDevMotor

*ENG

[0 to 65535 / 0 / 1count/step]

7-983-005

FusingMotor

*ENG

[0 to 65535 / 0 / 1count/step]



7984

[OutputLevel2CountNo.]


7-984-001

OPCTransferMotor

*ENG

[0 to 65535 / 0 / 1count/step]

7-984-002

BkDevMotor

*ENG

[0 to 65535 / 0 / 1count/step]

7-984-003

ColorOpcMotor

*ENG

[0 to 65535 / 0 / 1count/step]

7-984-004

ColorDevMotor

*ENG

[0 to 65535 / 0 / 1count/step]

7-984-005

FusingMotor

*ENG

[0 to 65535 / 0 / 1count/step]



7985

[OutputLevel3CountNo.]


7-985-001

OPCTransferMotor

*ENG

[0 to 65535 / 0 / 1count/step]

7-985-002

BkDevMotor

*ENG

[0 to 65535 / 0 / 1count/step]

7-985-003

ColorOpcMotor

*ENG

[0 to 65535 / 0 / 1count/step]

7-985-004

ColorDevMotor

*ENG

[0 to 65535 / 0 / 1count/step]

7-985-005

FusingMotor

*ENG

[0 to 65535 / 0 / 1count/step]



7986

[VelocityErr.CountNo.]


7-986-001

OPCTransferMotor

*ENG

[0 to 65535 / 0 / 1count/step]

7-986-002

BkDevMotor

*ENG

[0 to 65535 / 0 / 1count/step]

7-986-003

ColorOpcMotor

*ENG

[0 to 65535 / 0 / 1count/step]

7-986-004

ColorDevMotor

*ENG

[0 to 65535 / 0 / 1count/step]

7-986-005

FusingMotor

*ENG

[0 to 65535 / 0 / 1count/step]

Engine SP Mode Tables

    1. INPUT AND OUTPUT CHECK


      1. INPUT CHECK TABLE


        Main Machine, Paper Feed Tray


        5803

        [INPUT Check]

        5-803-001

        Registration Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        0: paper exist

        1: paper non exist

        Responds to paper existence on register sensor position. (0: paper exist, 1: paper non exist)

        5-803-002

        Paper Feed Sensor 1

        This setting is not available for MP C2004/MP C2504.

        ENG

        [0 or 1 / 0 / 1/step]

        0: paper exist

        1: paper non exist

        Responds to paper existence on 1st paper feed sensor position. (0: paper exist, 1: paper non exist)

        5-803-003

        Transport Sensor 1

        ENG

        [0 or 1 / 0 / 1/step]

        0: paper exist

        1: paper non exist

        Responds to paper existence on 1st carry sensor position. (0: paper exist, 1: paper non exist)

        5-803-004

        Paper Feed Sensor 2

        This setting is not available for MP C2004/MP C2504.

        ENG

        [0 or 1 / 0 / 1/step]

        0: paper exist

        1: paper non exist

        Responds to paper existence on 2nd paper feed sensor position. (0: paper exist, 1: paper non exist)

        5-803-005

        Transport Sensor 2

        ENG

        [0 or 1 / 0 / 1/step]

        0: paper exist

        1: paper non exist

        Responds to paper existence on 2nd carry sensor position. (0: paper exist, 1: paper non exist)

        5-803-006

        Fusing Entrance Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        0: paper exist

        1: paper non exist

        Responds to paper existence on fusing entrance sensor position. (0: paper exist, 1: paper non exist)

        5-803-007

        Fusing Exit Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        0: paper exist

        1: paper non exist

        Responds to paper existence on fusing exit sensor position. (0: paper exist, 1: paper non exist)

        5-803-008

        Paper Exit Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        0: paper exist

        1: paper non exist

        Responds to paper existence on paper exit sensor position. (0: paper exist, 1: paper non exist)

        5-803-009

        Inverter Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        0: paper exist

        1: paper non exist

        Responds to paper existence on reverse sensor position. (0: paper exist, 1: paper non exist)

        5-803-010

        Duplex Exit Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        0: paper exist

        1: paper non exist

        Responds to paper existence on duplex exit sensor position. (0: paper exist, 1: paper non exist)

        5-803-011

        Duplex Entrance Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        0: paper exist

        1: paper non exist

        Responds to paper existence on duplex entrance sensor position. (0: paper exist, 1: paper non exist)

        5-803-012

        Tray Full Exit Sensor

        This setting is not available for MP C2004/MP C2504.

        ENG

        [0 or 1 / 0 / 1/step]

        0: Not full

        1: full

        Detects paper full of main unit paper exit tray. (0: Not full, 1: full)

        5-803-013

        Tray 1: Paper Height Sensor

        ENG

        [0 to 3 / 0 / 1/step] When full is 100%, 11: 71 to 100%

        01: 31 to 70%

        00: 11 to 30%

        10: 1 to 10%

        Detects remaining paper amount of 1st paper feed tray. (When full is 100%,

        11: 71 to 100%, 01: 31 to 70%, 00: 11 to 30%, 10: 1 to 10%)

        *Check SP5-803-015 for paper end.

        5-803-014

        Tray 1: Upper Limit Sensor

        ENG

        [0 or 1 / 0 / 1/step] 0: less then limit 1: high then limit

        Detects the height of paper loaded in 1st paper feed tray. (0: less then limit, 1: high then limit)

        * As long as you do not press the white bar of the machine side in the tray back, not output.

        5-803-015

        Tray 1: Paper End Detection

        ENG

        [0 or 1 / 0 / 1/step]

        0: No paper

        1: paper remaining

        Detects paper is running out on 1st paper feed tray. (0: No paper, 1: paper remaining)

        5-803-016

        Tray 1: Set Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        0: set 1:not set

        Detects that 1st paper feed tray is set to main unit. (0: set, 1:not set)

        Engine SP Mode Tables

        5-803-017

        Tray 2: Paper Height Sensor

        ENG

        [0 to 3 / 0 / 1/step] When full is 100%, 11: 71 to 100%

        01: 31 to 70%

        00: 11 to 30%

        10: 1 to 10%

        Detects remaining paper amount of 2nd paper feed tray. (When full is 100%,

        11: 71 to 100%, 01: 31 to 70%, 00: 11 to 30%, 10: 1 to 10%)

        *Check SP5-803-019 for paper end.

        5-803-018

        Tray 2: Paper End Sensor

        ENG

        [0 or 1 / 0 / 1/step] 0: less then limit 1: high then limit

        Detects the height of paper loaded in 2nd paper feed tray. (0: less then limit, 1: high then limit)

        * As long as you do not press the white bar of the machine side in the tray back, not output.

        5-803-019

        Tray 2: Paper End Detection

        ENG

        [0 or 1 / 0 / 1/step]

        0: No paper

        1: paper remaining

        Detects paper running out of 2nd paper feed tray. (0: No paper, 1: paper remaining)

        5-803-020

        Tray 2: Set Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        0: set

        1: not set

        Detects that 2nd paper feed tray is set to main unit. (0: set, 1:not set)

        5-803-021

        Tray 2: Size Sensor

        ENG

        [0 to 15 / 0 / 1/step]

        Value changes depending on paper size (fence position) set to 2nd paper feed tray.

        5-803-022

        By-pass: Paper End Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        0: No paper

        1: paper remaining


        Detects paper is running out on bypass tray. (0: No paper, 1: paper remaining)

        5-803-023

        By-pass: Main Scan Length Sensor

        ENG

        [0 to 31 / 0 / 1/step]

        Value changes depending on main scan direction of paper set to bypass tray.

        5-803-024

        By-pass: Sub Scan Length Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        Value changes depending on sub scan direction of paper set to bypass tray.

        5-803-025

        Interlock Release Detection

        ENG

        [0 to 1 / 0 / 1/step]

        00: Unlocked

        11: Locked

        Detects open/close of interlock switch (front cover/right cover). (00: Unlocked, 11: Locked)

        5-803-026

        Right Door Open/Close Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        0: close

        1: open

        Detects right door status. (0: close, 1: open)

        5-803-027

        Duplex Guide Plate Open/Close Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        0: close

        1: open

        Detects duplex guide plate status. (0: close, 1: open)

        5-803-028

        PTR Open/Close Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        0: open

        1: close

        Detects paper transfer unit status. (0: open, 1: close)

        Engine SP Mode Tables

        5-803-029

        ITB Contact Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        0: Abutting

        1: Alienate

        Detects image transfer roller (Y, M, and C) and photoreceptors distance. (0: Abutting, 1: Alienate)

        5-803-030

        PTR Contact Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        0: Abutting

        1: Alienate

        Detects image transfer belt and paper transfer rollers distance. (0: Abutting, 1: Alienate)

        5-803-031

        New ITB Unit Detection

        ENG

        [0 or 1 / 0 / 1/step]

        Not available with C1

        5-803-032

        Toner Collection Full Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        0: Not full

        1: full

        Detects full of waste toner bottle. (0: Not full, 1: full)

        5-803-033

        Toner Collection Bottle Set Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        0: set

        1: not set

        Detects that waste toner bottle is set to main unit. (0: set, 1:not set)

        5-803-034

        Toner End Sensor:Y

        ENG

        [0 or 1 / 0 / 1/step]

        0: End

        1: Not End

        Detects remaining toner amount.

        *Power with SP5-804-173 before checking. (0: End, 1: Not End)

        5-803-035

        Toner End Sensor:M

        ENG

        [0 or 1 / 0 / 1/step]

        0: End

        1: Not End


        Detects remaining toner amount.

        *Power with SP5-804-173 before checking. (0: End, 1: Not End)

        5-803-036

        Toner End Sensor:C

        ENG

        [0 or 1 / 0 / 1/step]

        0: End

        1: Not End

        Detects remaining toner amount.

        *Power with SP5-804-173 before checking. (0: End, 1: Not End)

        5-803-037

        Toner End Sensor:K

        ENG

        [0 or 1 / 0 / 1/step]

        0: End

        1: Not End

        Detects remaining toner amount.

        *Power with SP5-804-172 before checking. (0: End, 1: Not End)

        5-803-038

        Fusing:Area Detection

        ENG

        [0 to 15 / 0 / 1/step] 01:200V system 10:100V System 00, 01:unit set error

        Detects region of fusing unit.

        (0111: 200V system, 1011: 100V System)

        5-803-039

        Fusing:New Unit Detection

        ENG

        [0 or 1 / 0 / 1/step]

        0: New

        1: Old

        Detects New/Old of fusing unit. (0: New, 1: Old)

        5-803-040

        Fusing Temp Detect

        ENG

        [0 or 1 / 0 / 1/step]

        0: Normal

        1: High temperature

        Detects whether high temperature is detected from fusing unit. (0: Normal, 1: High temperature)

        Engine SP Mode Tables

        5-803-041

        NC Sensor Temp Detection/ 2

        ENG

        [0 or 1 / 0 / 1/step]

        0: Normal

        1: High temperature

        Detects whether high temperature is detected from fusing unit. (0: Normal, 1: High temperature)

        5-803-042

        NC Sensor Temp Detection/ 1

        ENG

        [0 or 1 / 0 / 1/step]

        0: Normal

        1: High temperature

        Detects whether high temperature is detected from fusing unit. (0: Normal, 1: High temperature)

        5-803-047

        Nip Pres. Release Home Position Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        0: Pressured

        1: Not pressured

        Detects state of fusing nip pressure. (0: Pressured , 1: Not pressured)

        5-803-048

        Fusing Fan: Lock

        ENG

        [0 or 1 / 0 / 1/step]

        0: Running

        1: Stopped, or locked

        Detects locking of fusing exhaust heat fan. (0: Running, 1: Stopped, or locked)

        5-803-049

        Dev Fan: Right: Lock

        ENG

        [0 or 1 / 0 / 1/step]

        0: Running

        1: Stopped, or locked

        Detects locking of developer air intake fan (right). (0: Running, 1: Stopped, or locked)

        5-803-051

        PSU Cooling Fan: Lock

        ENG

        [0 or 1 / 0 / 1/step]

        0: Running

        1: Stopped, or locked

        Detects locking of PSU cooling fan. (0: Running, 1: Stopped, or locked)

        5-803-052

        Ozone Fan: Lock

        ENG

        [0 or 1 / 0 / 1/step]

        0: Running

        1: Stopped, or locked

        Detects locking of ozone exhaust air fan. (0: Running, 1: Stopped, or locked)

        5-803-054

        PSU Fan: Lock

        ENG

        [0 or 1 / 0 / 1/step]

        0: Running

        1: Stopped, or locked

        Detects locking of PSU exhaust heat fan. (0: Running, 1: Stopped, or locked)

        5-803-055

        PCB Box Cooling Fan: Lock

        ENG

        [0 or 1 / 0 / 1/step]

        0: Running

        1: Stopped, or locked

        Detects locking of electric box cooling fan. (0: Running, 1: Stopped, or locked)

        5-803-058

        Paper Exit Cooling Fan: Lock

        ENG

        [0 or 1 / 0 / 1/step]

        0: Running

        1: Stopped, or locked

        Detects locking of paper exit cooling fan. (0: Running, 1: Stopped, or locked)

        5-803-060

        Toner Supply Cooling Fan: Lock

        ENG

        [0 or 1 / 0 / 1/step]

        0: Running

        1: Stopped, or locked

        Detects locking of toner supply cooling fan. (0: Running, 1: Stopped, or locked)

        5-803-063

        Development Motor FC: Lock

        ENG

        [0 or 1 / 0 / 1/step]

        0: Stopped, or locked 1: Running

        Detects locking of developer motor (FC). (0: Running, 1: Stopped, or locked)

        Engine SP Mode Tables

        5-803-064

        Drum Motor FC: Lock

        ENG

        [0 or 1 / 0 / 1/step]

        0: Stopped, or locked 1: Running

        Detects locking of drum motor (FC). (0: Running, 1: Stopped, or locked)

        5-803-065

        Fusing Motor: Lock

        ENG

        [0 or 1 / 0 / 1/step]

        0: Stopped, or locked 1: Running

        Detects locking of fusing motor.

        (0: Running, 1: Stopped, or locked)

        5-803-066

        Transfer Drum Motor K: Lock

        ENG

        [0 or 1 / 0 / 1/step]

        0: Stopped, or locked 1: Running

        Detects locking of transfer drum motor K. (0: Running, 1: Stopped, or locked)

        5-803-068

        PP:CB:SC Detection

        ENG

        [0 or 1 / 0 / 1/step]

        0: SC detected

        1: Normal

        Detects SC of HVP (electrify/develop). (0: SC detected, 1: Normal)

        5-803-069

        PP:TTS:SC Detection

        ENG

        [0 or 1 / 0 / 1/step]

        0: SC detected

        1: Normal

        Detects SC of HVP (transfer). (0: SC detected, 1: Normal)

        5-803-072

        Key Counter: Set 1

        ENG

        [0 or 1 / 0 / 1/step]

        0: set 1:unset

        Detects setting of key counter. (0: set, 1:unset)

        (key counter: set 1=0, 2=1 for set, others for unset)

        5-803-073

        Key Counter: Set 2

        ENG

        [0 or 1 / 0 / 1/step]

        0: unset 1:set

        Detects setting of key counter. (0: unset, 1:set)

        (key counter: set 1=0, 2=1 for set, others for unset)

        5-803-074

        Key Card Set

        ENG

        [0 or 1 / 0 / 1/step]

        0: set

        1: not set

        Detects that key card is set to main unit. (0: set, 1:not set)

        5-803-075

        1 Bin Tray: Paper Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        0: paper exist

        1: paper non exist

        Detects that paper is left upon the tray. (0: paper exist, 1: paper non exist)

        5-803-076

        1 Bin Tray: Set Detection System

        ENG

        [0 or 1 / 0 / 1/step]

        0: paper exist

        1: paper non exist

        Detects that tray is set to main unit. (0: set, 1:not set)

        5-803-077

        Bridge Relay Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        0: paper exist

        1: paper non exist

        Responds to paper existence on carry sensor position or bridge unit. (0: paper exist, 1: paper non exist)

        5-803-078

        Bridge Exit Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        0: Paper exist

        1: Paper do not exist

        Responds to paper existence on paper exit sensor position or bridge unit. (0: paper exist, 1: paper non exist)

        Engine SP Mode Tables

        5-803-079

        Bridge Set Detection System

        ENG

        [0 or 1 / 0 / 1/step]

        10: set 11:not set

        Detects that bridge unit is set to main unit. (10: set, 11:not set)

        5-803-082

        Bridge Relay/Left Exit Cover Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        0: close

        1: open

        Detects open/close of the left carry cover open/close sensor (left paper exit tray) and the relay carry cover open/close sensor (bridge unit).

        (0: close, 1: open)

        5-803-083

        Bridge Exit/Upper Exit Cover Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        0: close

        1: open

        Detects open/close of the upper carry cover open/close sensor (left paper exit tray) and the relay paper exit cover open/close sensor (bridge unit). (0: close, 1: open)

        5-803-084

        Shift Tray: Set Detection System

        ENG

        [0 or 1 / 0 / 1/step]

        01: set 11:not set

        Detects that shift tray is set to main unit. (01: set, 11:not set)

        5-803-085

        Shift Tray: Position Sensor 1

        ENG

        [0 or 1 / 0 / 1/step]

        0: Stop on this side. during moving towards inner

        1: Stop on inner side. during moving towards this side

        Detects shift tray position.

        (0: Stop on this side. during moving towards inner,

        1: Stop on inner side. during moving towards this side)

        5-803-086

        Shift Tray: Position Sensor 2

        ENG

        [0 or 1 / 0 / 1/step]

        *It is a backup sensor with this machine, so "1" is always displayed)

        5-803-094

        GAVD Open/Close Detection

        ENG

        [0 or 1 / 0 / 1/step]

        For checking door open/close during process. No need to operate.

        5-803-095

        Bridge 24V Fuse Detection

        ENG

        [0 or 1 / 0 / 1/step]

        0: Not cut

        1: Cut

        Detects state of 24V fuse on the bridge unit. (0: Not cut, 1: Cut)

        5-803-096

        Bridge 5V Fuse Detection

        ENG

        [0 or 1 / 0 / 1/step]

        0: Not cut

        1: Cut

        Detects state of 5V fuse on the bridge unit. (0: Not cut, 1: Cut)

        5-803-200

        HP Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        Tests the scanner HP sensor.

        5-803-201

        Platen Cover Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        Tests the book open/close sensor.

        5803

        [INPUT Check]

        Gets information of specified sensor.

        5-803-211

        Bank: Tray3: Feed Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        0: paper not detected 1: paper detected.

        5-803-212

        Bank: Tray4: Feed Sensor

        ENG

        5-803-213

        Bank: Tray5: Feed Sensor

        ENG

        5-803-214

        Bank: Tray3: Transport Sensor

        ENG

        5-803-215

        Bank: Tray4: Transport Sensor

        ENG

        5-803-216

        Bank: Tray5: Transport Sensor

        ENG

        Engine SP Mode Tables

        5-803-217

        Bank: Feed Cover Open Detection 1

        ENG

        [0 or 1 / 0 / 1/step]

        0: cover open

        1: cover closed

        5-803-218

        Bank: Feed Cover Open Detection 2

        ENG

        5-803-219

        LCT Paper Supply Open/Close

        ENG

        5-803-220

        LCT Slide Open/Close

        ENG

        [0 or 1 / 0 / 1/step]

        0: slide open

        1: slide closed


        ADF


        6007

        [ADF INPUT Check]

        Gets sensor information from ADF. Displays signal level of sensor as it is.

        6-007-001

        Original Length 1 (B5 Detection Sensor)

        ENG

        [0 or 1 / 0 / 1/step]

        6-007-002

        Original Length 2 (A4 Detection Sensor)

        ENG

        [0 or 1 / 0 / 1/step]

        6-007-003

        Original Length 3 (LG Detection Sensor)

        ENG

        [0 or 1 / 0 / 1/step]

        6-007-004

        Original Width 1

        ENG

        [0 or 1 / 0 / 1/step]

        6-007-005

        Original Width 2

        ENG

        [0 or 1 / 0 / 1/step]

        6-007-006

        Original Width 3

        ENG

        [0 or 1 / 0 / 1/step]

        6-007-007

        Original Width 4

        ENG

        [0 or 1 / 0 / 1/step]

        6-007-008

        Original Width 5

        ENG

        [0 or 1 / 0 / 1/step]

        6-007-009

        Original Detection

        ENG

        [0 or 1 / 0 / 1/step]

        6-007-011

        Skew Correction

        ENG

        [0 or 1 / 0 / 1/step]

        6-007-013

        Registration Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        6-007-014

        Exit Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        6-007-015

        Feed Cover Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        6-007-016

        Lift Up Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        6-007-023

        Rear Edge Detection

        ENG

        [0 or 1 / 0 / 1/step]

        Engine SP Mode Tables



        6011

        [1-Pass ADF INPUT Check]

        For Single-Pass simultaneous duplex models only.

        6-011-001

        Original Length 1 (B5 Sensor)

        ENG

        [0 or 1 / 0 / 1/step]

        Gets sensor information from ADF. Gives 1 when there is a paper at sensor area.

        6-011-002

        Original Length 2 (A4 Sensor)

        ENG

        [0 or 1 / 0 / 1/step]

        Gets sensor information from ADF. Gives 1 when there is a paper at sensor area.

        6-011-003

        Original Length 3 (LG Sensor)

        ENG

        [0 or 1 / 0 / 1/step]

        Gets sensor information from ADF. Gives 1 when there is a paper at sensor area.

        6-011-004

        Original Width 1

        ENG

        [0 or 1 / 0 / 1/step]

        Gets sensor information from ADF. Gives 1 when there is a paper at sensor area.

        6-011-005

        Original Width 2

        ENG

        [0 or 1 / 0 / 1/step]

        Gets sensor information from ADF. Gives 1 when there is a paper at sensor area.

        6-011-006

        Original Width 3

        ENG

        [0 or 1 / 0 / 1/step]

        Gets sensor information from ADF. Gives 1 when there is a paper at sensor area.

        6-011-007

        Original Width 4

        ENG

        [0 or 1 / 0 / 1/step]


        Gets sensor information from ADF. Gives 1 when there is a paper at sensor area.

        6-011-008

        Original Width 5

        ENG

        [0 or 1 / 0 / 1/step]

        Gets sensor information from ADF. Gives 1 when there is a paper at sensor area.

        6-011-009

        Original Detection

        ENG

        [0 or 1 / 0 / 1/step]

        Gets sensor information from ADF. Gives 1 when original is set.

        6-011-010

        Separation Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        Gets sensor information from ADF. Gives 1 when there is a paper at sensor area.

        6-011-011

        Skew Correction

        ENG

        [0 or 1 / 0 / 1/step]

        Gets sensor information from ADF. Gives 1 when there is a paper at sensor area.

        6-011-012

        Scan Entrance Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        Gets sensor information from ADF. Gives 1 when there is a paper at sensor area.

        6-011-013

        Registration Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        Gets sensor information from ADF. Gives 1 when there is a paper at sensor area.

        6-011-014

        Exit Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        Gets sensor information from ADF. Gives 1 when there is a paper at sensor area.

        6-011-015

        Feed Cover Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        Gets sensor information from ADF. Gives 1 when cover is open.

        6-011-016

        Lift Up Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        Gets sensor information from ADF. Gives 1 when lift up.

        6-011-018

        Pick-Up Roller HP Sensor

        ENG

        [0 or 1 / 0 / 1/step]


        Gets sensor information from ADF. Gives 1 when pick up roller is not in home position.

        6-011-021

        Bottom Plate HP Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        Gets sensor information from ADF. Gives 1 when bottom plate is not in home position.

        6-011-022

        Bottom Plate Position Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        Gets sensor information from ADF. Gives 1 when pick up roller is not in the correct position.

        6-011-023

        Original Length 4 (LT/A4 Tail Sensor)

        ENG

        [0 or 1 / 0 / 1/step]

        Gets sensor information from ADF. Gives 1 when there is a paper at sensor area.


        Engine SP Mode Tables

        Finisher


        6123

        [INPUT Check: 2K/3K FIN]

        6-123-001

        Entrance Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        Gets information of specified sensor. Displays signal level of sensor as it is.

        6-123-002

        Horizontal Transport Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        Gets information of specified sensor. Displays signal level of sensor as it is.

        6-123-003

        Switchback Transport Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        Gets information of specified sensor. Displays signal level of sensor as it is.

        6-123-004

        Proof Tray Exit Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        Gets information of specified sensor. Displays signal level of sensor as it is.

        6-123-005

        Shift Tray Exit Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        Gets information of specified sensor. Displays signal level of sensor as it is.

        6-123-006

        Booklet Stapler Exit Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        Gets information of specified sensor. Displays signal level of sensor as it is.

        6-123-007

        Paper Exit Open/Close Guide HP Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        Gets information of specified sensor. Displays signal level of sensor as it is.

        6-123-008

        Punch HP Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        Gets information of specified sensor. Displays signal level of sensor as it is.

        6-123-009

        Punch Move HP Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        Gets information of specified sensor. Displays signal level of sensor as it is.

        6-123-010

        S-to-S Registration Detection HP Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        Gets information of specified sensor. Displays signal level of sensor as it is.

        6-123-011

        Lower Junction Solenoid HP Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        Gets information of specified sensor. Displays signal level of sensor as it is.

        6-123-012

        Jogger HP Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        Gets information of specified sensor. Displays signal level of sensor as it is.

        6-123-013

        Positioning Roller HP Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        Gets information of specified sensor. Displays signal level of sensor as it is.

        6-123-014

        Feed-out HP Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        Gets information of specified sensor. Displays signal level of sensor as it is.

        6-123-015

        Stapler Moving HP Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        Gets information of specified sensor. Displays signal level of sensor as it is.

        6-123-016

        Booklet Stapler HP Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        Gets information of specified sensor. Displays signal level of sensor as it is.

        6-123-017

        Booklet Jogger HP Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        Gets information of specified sensor. Displays signal level of sensor as it is.

        6-123-018

        Booklet Jog Solenoid HP Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        Gets information of specified sensor. Displays signal level of sensor as it is.

        6-123-019

        Booklet Standard Fence HP Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        Gets information of specified sensor. Displays signal level of sensor as it is.

        6-123-020

        Booklet Stapler HP Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        Gets information of specified sensor. Displays signal level of sensor as it is.

        6-123-022

        Folder Blade Cam HP Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        Gets information of specified sensor. Displays signal level of sensor as it is.

        6-123-023

        Folder Blade HP Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        Gets information of specified sensor. Displays signal level of sensor as it is.

        6-123-024

        Shift Roller HP Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        Gets information of specified sensor. Displays signal level of sensor as it is.

        6-123-028

        Drag Roller Vibrating HP Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        Gets information of specified sensor. Displays signal level of sensor as it is.

        6-123-029

        LE Guide HP Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        Gets information of specified sensor. Displays signal level of sensor as it is.

        6-123-030

        TE Stack Plate HP Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        Gets information of specified sensor. Displays signal level of sensor as it is.

        6-123-031

        Staple Tray Paper Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        Gets information of specified sensor. Displays signal level of sensor as it is.

        6-123-032

        ITB Paper Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        Gets information of specified sensor. Displays signal level of sensor as it is.

        Engine SP Mode Tables

        6-123-033

        Booklet Stapler Transport Paper Sn: Upper

        ENG

        [0 or 1 / 0 / 1/step]

        Gets information of specified sensor. Displays signal level of sensor as it is.

        6-123-034

        Booklet Stapler Transport Paper Sn: Lower

        ENG

        [0 or 1 / 0 / 1/step]

        Gets information of specified sensor. Displays signal level of sensor as it is.

        6-123-035

        Paper Height Sensor: Shift

        ENG

        [0 or 1 / 0 / 1/step]

        Gets information of specified sensor. Displays signal level of sensor as it is.

        6-123-036

        Corner Stapler Paper Height Sensor 1

        ENG

        [0 or 1 / 0 / 1/step]

        Gets information of specified sensor. Displays signal level of sensor as it is.

        6-123-037

        Corner Stapler Paper Height Sensor 2

        ENG

        [0 or 1 / 0 / 1/step]

        Gets information of specified sensor. Displays signal level of sensor as it is.

        6-123-038

        Proof Tray Full Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        Gets information of specified sensor. Displays signal level of sensor as it is.

        6-123-039

        Booklet Stapler Full Sensor 1

        ENG

        [0 or 1 / 0 / 1/step]

        Gets information of specified sensor. Displays signal level of sensor as it is.

        6-123-040

        Booklet Stapler Full Sensor 2

        ENG

        [0 or 1 / 0 / 1/step]

        Gets information of specified sensor. Displays signal level of sensor as it is.

        6-123-041

        S-to-S Registration Detection Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        Gets information of specified sensor. Displays signal level of sensor as it is.

        6-123-042

        Punch RPS Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        Gets information of specified sensor. Displays signal level of sensor as it is.

        6-123-043

        Corner Stapler Leading Edge Detection Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        Gets information of specified sensor. Displays signal level of sensor as it is.

        6-123-044

        Corner Stapler Staple End Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        Gets information of specified sensor. Displays signal level of sensor as it is.

        6-123-045

        Booklet Stapler Staple End Sensor: Front

        ENG

        [0 or 1 / 0 / 1/step]

        Gets information of specified sensor. Displays signal level of sensor as it is.

        6-123-046

        Booklet Stapler Staple End Sensor: Rear

        ENG

        [0 or 1 / 0 / 1/step]

        Gets information of specified sensor. Displays signal level of sensor as it is.

        6-123-047

        Shift Tray Lower Limit Sensor 1

        ENG

        [0 or 1 / 0 / 1/step]

        Gets information of specified sensor. Displays signal level of sensor as it is.

        6-123-048

        Shift Tray Lower Limit Sensor 2

        ENG

        [0 or 1 / 0 / 1/step]

        Gets information of specified sensor. Displays signal level of sensor as it is.

        6-123-049

        Shift Tray Lower Limit Sensor 3

        ENG

        [0 or 1 / 0 / 1/step]

        Gets information of specified sensor. Displays signal level of sensor as it is.

        6-123-050

        Shift Tray Lower Limit Sensor 4

        ENG

        [0 or 1 / 0 / 1/step]

        Gets information of specified sensor. Displays signal level of sensor as it is.

        6-123-051

        Shift Tray Lower Limit Sensor 5

        ENG

        [0 or 1 / 0 / 1/step]

        Gets information of specified sensor. Displays signal level of sensor as it is.

        6-123-052

        Punch Chad Full Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        Gets information of specified sensor. Displays signal level of sensor as it is.

        6-123-053

        Punch Set Detection

        ENG

        [0 or 1 / 0 / 1/step]

        0: connected

        1: not connected

        Engine SP Mode Tables


        Gets connection status of punch unit.

        6-123-054

        Shift Jogger Set Detection

        ENG

        [0 or 1 / 0 / 1/step]

        0: connected

        1: not connected

        Gets connection status of setting jogger unit.

        * Not use: currently, VOLGA-B does not have setting jogger in system configuration.

        6-123-055

        Booklet Stapler Set Detection

        ENG

        [0 or 1 / 0 / 1/step]

        0: not connected

        1: connected

        Gets connection status of saddle stitch unit.

        6-123-056

        Front Door SW

        ENG

        [0 or 1 / 0 / 1/step]

        Gets information of specified switch. Displays signal level of switch as it is.

        6-123-057

        Dynamic Roller Open/Close Guide Plate Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        Gets information of specified switch. Displays signal level of switch as it is.

        6-123-058

        Tray Upper Limit SW

        ENG

        [0 or 1 / 0 / 1/step]

        Gets information of specified switch. Displays signal level of switch as it is.

        6-123-059

        Paper Exit Open/Close Guide Plate Limit SW

        ENG

        [0 or 1 / 0 / 1/step]

        Gets information of specified switch. Displays signal level of switch as it is.

        6-123-060

        Punch Selection DIPSW 1

        ENG

        [0 or 1 / 0 / 1/step]

        Gets information of specified switch. Displays signal level of switch as it is.

        6-123-061

        Punch Selection DIPSW 2

        ENG

        [0 or 1 / 0 / 1/step]

        Gets information of specified switch. Displays signal level of switch as it is.

        6-123-065

        Paper Guide HP Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        Gets information of specified switch. Displays signal level of switch as it is.

        6-123-066

        Shift Jogger HP Sensor: Front

        ENG

        [0 or 1 / 0 / 1/step]


        Gets information of specified switch. Displays signal level of switch as it is.

        6-123-067

        Shift Jogger HP Sensor: Rear

        ENG

        [0 or 1 / 0 / 1/step]

        Gets information of specified switch. Displays signal level of switch as it is.

        6-123-068

        Shift Jogger Retraction HP Sensor: Upper

        ENG

        [0 or 1 / 0 / 1/step]

        Gets information of specified switch. Displays signal level of switch as it is.

        6-123-069

        Shift Jogger Retraction HP Sensor: Lower

        ENG

        [0 or 1 / 0 / 1/step]

        Gets information of specified switch. Displays signal level of switch as it is.

        Engine SP Mode Tables



        6135

        [INPUT Check: FrontFIN]

        Gets information of specified sensor. Displays signal level of sensor as it is.

        6-135-001

        Entrance Sensor

        *ENG

        [0 or 1 / 0 / 1/step]

        6-135-002

        Carry Sensor

        *ENG

        [0 or 1 / 0 / 1/step]

        6-135-003

        Exit Sensor

        *ENG

        [0 or 1 / 0 / 1/step]

        6-135-004

        Staple Tray Paper Sensor

        *ENG

        [0 or 1 / 0 / 1/step]

        6-135-005

        Front Jogger HP Sensor

        *ENG

        [0 or 1 / 0 / 1/step]

        6-135-006

        Rear Jogger HP Sensor

        *ENG

        [0 or 1 / 0 / 1/step]

        6-135-007

        Sft Roller HP Sensor

        *ENG

        [0 or 1 / 0 / 1/step]

        6-135-008

        Hitroll HP Sensor

        *ENG

        [0 or 1 / 0 / 1/step]

        6-135-009

        Ext Guide Plate HP Sensor

        *ENG

        [0 or 1 / 0 / 1/step]

        6-135-010

        Staple Moving HP Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        6-135-011

        Shift Tray Paper Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        6-135-012

        Shift Tray Limit Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        6-135-013

        Staple Rotation Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        6-135-014

        Staple Near End Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        6-135-015

        Self Priming Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        6-135-016

        Stopper HP Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        6-135-017

        Punch HP Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        6-135-018

        Punch Pluse Count Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        6-135-019

        Punch Chad Full Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        6-135-020

        Punch Moving HP Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        6-135-021

        Punch Registration Detection HP Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        6-135-022

        Punch Registration Detection Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        6135

        [INPUT Check: FrontFIN]

        Gets information of specified switch. Displays signal level of switch as it is.

        6-135-023

        Slide Door SW

        ENG

        [0 or 1 / 0 / 1/step]

        6-135-024

        Shift Tray Upper Limit SW

        ENG

        [0 or 1 / 0 / 1/step]



        6161

        [FIN (1K FIN) INPUT Check]

        Gets information of specified sensor. Displays signal level of sensor as it is.

        6-161-001

        Entrance Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        6-161-002

        Upper Cover Open/Close Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        6-161-003

        Proof Tray Exit Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        6-161-004

        Proof Tray Full Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        6-161-005

        Shift HP Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        6-161-006

        Exit Guide Plate Open/Close HP Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        6-161-007

        Shift Paper Exit (Lift Tray Exit) Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        6-161-008

        Positioning Roller HP Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        6-161-009

        Lift Tray Paper Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        6-161-010

        Jogger HP Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        6-161-011

        Feed Out HP Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        6-161-012

        Lift Tray Lower Limit Sensor (Upper)

        ENG

        [0 or 1 / 0 / 1/step]

        6-161-013

        Lift Tray Lower Limit Sensor (Lower)

        ENG

        [0 or 1 / 0 / 1/step]

        6-161-014

        Staple Tray Paper Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        6-161-015

        Stapler Moving HP Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        6-161-016

        Near End Sensor (Common: Corner/Bklt Stplr)

        ENG

        [0 or 1 / 0 / 1/step]

        6-161-017

        Self Priming Sensor (Common:Crnr/Bklt Stplr)

        ENG

        [0 or 1 / 0 / 1/step]

        6-161-018

        Driver HP Sensor (Corner/Booklet Stapler)

        ENG

        [0 or 1 / 0 / 1/step]

        6-161-020

        Clincher HP Sensor (Corner/Booklet Stapler)

        ENG

        [0 or 1 / 0 / 1/step]

        6-161-022

        Stapler Retraction Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        6-161-023

        Untitled

        ENG

        [0 or 1 / 0 / 1/step]

        6-161-024

        Untitled

        ENG

        [0 or 1 / 0 / 1/step]

        6-161-025

        Untitled

        ENG

        [0 or 1 / 0 / 1/step]

        6-161-026

        Punch HP Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        6-161-027

        Punch RP Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        6-161-028

        Punch Hopper Full Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        6-161-029

        Punch Move HP Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        6-161-030

        S-to-S Registration Detection HP Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        Engine SP Mode Tables

        6-161-031

        S-to-S Registration Detection Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        6161

        [FIN (1K FIN) INPUT Check]

        Gets information of specified switch. Displays signal level of switch as it is.

        6-161-032

        Punch Selection DIPSW 1

        ENG

        [0 or 1 / 0 / 1/step]

        6-161-033

        Punch Selection DIPSW 2

        ENG

        [0 or 1 / 0 / 1/step]

        6161

        [FIN (1K FIN) INPUT Check]

        Gets information of specified sensor. Displays signal level of sensor as it is.

        6-161-034

        ITB Transport Sensor: Right

        ENG

        [0 or 1 / 0 / 1/step]

        6-161-035

        ITB Transport Sensor: Left

        ENG

        [0 or 1 / 0 / 1/step]

        6-161-036

        Stack Transport Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        6-161-037

        Stack Trans Upper Pressure Release HP Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        6-161-038

        Stack Trans Lower Pressure Release HP Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        6-161-039

        Fold Blade HP Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        6-161-040

        Fold Cam HP Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        6-161-041

        TE Stopper Transport Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        6-161-042

        TE Stopper HP Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        6-161-043

        Booklet Folder Exit Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        6-161-044

        Booklet Folder Tray Full Sensor: Upper

        ENG

        [0 or 1 / 0 / 1/step]

        6-161-045

        Booklet Folder Tray Full Sensor: Lower

        ENG

        [0 or 1 / 0 / 1/step]

        6161

        [FIN (1K FIN) INPUT Check]

        Gets information of specified switch. Displays signal level of switch as it is.

        6-161-046

        Door Open/Close SW

        ENG

        [0 or 1 / 0 / 1/step]

        6-161-047

        Lift Tray Upper Limit SW

        ENG

        [0 or 1 / 0 / 1/step]

        6161

        [FIN (1K FIN) INPUT Check]

        Gets information of specified sensor. Displays signal level of sensor as it is.

        6-161-048

        Paper Guide HP Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        Engine SP Mode Tables



        6184

        [Input Check: NoStplBindFIN]

        6-184-001

        Entrance Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        Gets the entrance sensor information of non staple finisher. (0: Sensor Off, 1: Sensor On)

        6-184-002

        Exit Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        Gets the paper exit sensor information of non staple finisher. (0: Sensor Off, 1: Sensor On)

        6-184-003

        Horizontal Registration Detection Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        Gets the horizontal registration sensor information of non staple finisher. (0: Sensor Off, 1: Sensor On)

        6-184-004

        Shift HP Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        Gets the shift HP sensor information of non staple finisher. (0: Sensor Off, 1: Sensor On)

        6-184-005

        Junction Solenoid HP Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        Gets the junction solenoid HP sensor information of non staple finisher. (0: Sensor Off, 1: Sensor On, “0“ appears if sensor detects home position)

        6-184-006

        Exit Pressure Release HP Sensor

        ENG

        [0 or 1 / 0 / 1/step]

        Gets the exit pressure release HP sensor information of non staple finisher. (0: Sensor Off, 1: Sensor On)

        6-184-007

        Stapler HP Sensor

        ENG

        [0 or 1 / 0 / 1/step]


        Gets the stapler HP sensor information of non staple finisher. (0: Sensor On, “0“ appears if sensor detects home position)

        6-184-008

        Tray Full Detection Sensor 1

        ENG

        [0 or 1 / 0 / 1/step]

        Gets the tray full detection sensor 1 information of non staple finisher. (0: Paper overflow )

        6-184-009

        Tray Full Detection Sensor 2

        ENG

        [0 or 1 / 0 / 1/step]

        Gets the tray full detection sensor 2 information of non staple finisher. (0: Paper overflow )

        6-184-010

        Slide Door Open/Close Door SW

        ENG

        [0 or 1 / 0 / 1/step]

        Gets the slide door switch information of non staple finisher. (0: Close, 1: Open)


      2. OUTPUT CHECK TABLE


Main Machine, Paper Feed Tray


5804

[OUTPUT Check]

5-804-001

Feed Pickup Solenoid 1 This setting is not available for

MP C2004/MP C2504.

ENG

[0 or 1 / 0 / 1/step]

Moves 1st paper feed tray pick up solenoid.

5-804-002

Feed Pickup Solenoid 2 This setting is not available for

MP C2004/MP C2504.

ENG

[0 or 1 / 0 / 1/step]

Moves 2nd paper feed tray pick up solenoid.

5-804-003

Bypass Pickup Solenoid

ENG

[0 or 1 / 0 / 1/step]

Moves bypass pick up solenoid.

5-804-004

Exit Junction Solenoid

ENG

[0 or 1 / 0 / 1/step]


Moves output paper divide solenoid.

5804

[OUTPUT Check]

Moves paper feed tray rising motor.

* Do not execute SP 5-804-006/008 without removing the paper tray. Otherwise, the tray might be damaged.

5-804-005

Tray 1 Lift Motor:CW

ENG

[0 or 1 / 0 / 1/step]

5-804-006

Tray 1 Lift Motor:CCW

ENG

5-804-007

Tray 2 Lift Motor:CW

ENG

5-804-008

Tray 2 Lift Motor:CCW

ENG

5804

[OUTPUT Check]

Moves register motor.

5-804-009

Regist Motor:CCW:Standard Speed

ENG

[0 or 1 / 0 / 1/step]

5-804-011

Regist Motor:CCW:Low Speed

ENG

5804

[OUTPUT Check]

5-804-015

Regist Motor:Position Hold

ENG

[0 or 1 / 0 / 1/step]

Holds position of register motor.

5804

[OUTPUT Check]

Moves paper feed motor.

* It is fed if there is paper in the paper tray.

5-804-016

Feed Motor:CW:Standard Speed

ENG

[0 or 1 / 0 / 1/step]

5-804-018

Feed Motor:CW:Low Speed

ENG

5-804-022

Feed Motor:CCW:Standard Speed

ENG

5-804-024

Feed Motor:CCW:Low Speed

ENG

Engine SP Mode Tables

5804

[OUTPUT Check]

Moves transport motor.

5-804-028

Bypass V-Transport Motor:CW:Std Speed

ENG

[0 or 1 / 0 / 1/step]

5-804-030

Bypass V-Transport Motor:CW:Low Speed

ENG

5804

[OUTPUT Check]

5-804-034

Bypass V-Transport Motor:Position Hold

ENG

[0 or 1 / 0 / 1/step]

Holds position of transport motor.

5-804-037

Exit Motor: CW: Fusing Pressure Release

ENG

[0 or 1 / 0 / 1/step]

Moves fusing dis-pressure.

* If driving this motor while attaching the fusing unit, be sure to stop it less than 5 seconds. Otherwise, the unit might be damaged.

5804

[OUTPUT Check]

Moves paper exit motor.

5-804-041

Exit Motor:CCW:Standard Speed

ENG

[0 or 1 / 0 / 1/step]

5-804-043

Exit Motor:CCW:Low Speed

ENG

5804

[OUTPUT Check]

Moves reverse motor.

5-804-047

Inverter Motor:CW:Standard Speed

ENG

[0 or 1 / 0 / 1/step]

5-804-049

Inverter Motor:CW:Low Speed

ENG

5-804-052

Inverter Mt: CW: Normal Speed: Duplex

ENG

5-804-054

Inverter Mt: CW: Low Speed: Duplex

ENG


5-804-056

Inverter Motor:CCW:Standard Speed

ENG

5-804-058

Inverter Motor:CCW:Low Speed

ENG

5-804-061

Inverter Mt: CCW: Normal Speed: Inc Speed

ENG

5804

[OUTPUT Check]

Moves duplex entrance motor.

5-804-065

Duplex Entrance Motor:CW:Standard Speed

ENG

[0 or 1 / 0 / 1/step]

5-804-067

Duplex Entrance Motor:CW:Low Speed

ENG

5-804-068

Duplex Entrance Motor: Normal Speed: Duplex

ENG

5-804-069

Duplex Entrance Motor: Low Speed: Duplex

ENG

5804

[OUTPUT Check]

Moves bypass/duplex motor.

5-804-071

Duplex Bypass Motor:CW:Standard Speed

ENG

[0 or 1 / 0 / 1/step]

5-804-073

Duplex Bypass Motor:CW:Low Speed

ENG

5-804-074

Duplex Bypass Motor: CW: Normal Speed: Dup

ENG

5-804-075

Duplex Bypass Motor: CW: Low Speed: Duplex

ENG

Engine SP Mode Tables

5-804-077

Duplex Bypass Motor:CCW:Standard Speed

ENG


5-804-079

Duplex Bypass Motor:CCW:Low Speed

ENG

5804

[OUTPUT Check]

5-804-083

Duplex Bypass Motor:Position Hold

ENG

[0 or 1 / 0 / 1/step]

Holds position of bypass/duplex motor.

5804

[OUTPUT Check]

Moves fusing motor. *See Important below

5-804-092

Fusing Motor:CW:Standard Speed

ENG

[0 or 1 / 0 / 1/step]

5-804-094

Fusing Motor:CW:Low Speed

ENG

5-804-098

Fusing Motor:CCW:Low Speed

ENG

Important: Use the procedure below to do the output checks for the fusing exit motor. If you do not follow this procedure, a kink will form in the fusing belt sleeve, and the fusing sleeve belt unit will need to be replaced.

1. Do one of the following:

  • Open the right cover of the paper bank

  • Remove one of the toner bottles

  • Pull out the waste toner bottle half-way

  • Remove the fusing unit

  1. Enter SP mode.

  2. Do the following out output checks:

  • SP5-804-092 (Fusing Motor:CW:Standard Speed)

  • SP5-804-094 (Fusing Motor:CW:Low Speed)

  • SP5-804-098 (Fusing Motor:CCW:Low Speed)

  1. Without exiting SP mode, turn the main power switch off and then on again. Important: If you exit SP mode before you turn the main power switch off, the fusing exit motor will stay off when the machine warms up. Heat will be concentrated in one area of the fusing belt sleeve and cause a kink to form. If this happens, you will need to replace the fusing sleeve belt unit.

  2. Do the reverse of what you did in step 1 (for example, reattach the fusing unit).

5804

[OUTPUT Check]

5-804-104

Polygon Motor: L

ENG

[0 or 1 / 0 / 1/step]

Runs motor with 21969 rpm.

5-804-105

Polygon Motor: M

ENG

[0 or 1 / 0 / 1/step]

Runs motor with 25512 rpm.

5-804-106

Polygon Motor: H

ENG

[0 or 1 / 0 / 1/step]

Runs motor with 30236 rpm.

5-804-107

Polygon Motor: HH

ENG

[0 or 1 / 0 / 1/step]

Runs motor with 34488 rpm.

5-804-110

Fusing Fan: Full Speed

ENG

[0 or 1 / 0 / 1/step]

Moves fusing exhaust fan.

5-804-111

Fusing Fan: Half Speed

ENG

[0 or 1 / 0 / 1/step]

Moves fusing exhaust fan.

Engine SP Mode Tables

5-804-113

PSU Cooling/Exhaust Heat Fan

ENG

[0 or 1 / 0 / 1/step]

Moves PSU cooling fan and PSU exhaust fan (not included in this machine).

5-804-114

Ozone Fan

ENG

[0 or 1 / 0 / 1/step]

Moves ozone exhaust heat fan.

5-804-115

PCB Box Cooling Fan/ Exhaust Cooling Fan

ENG

[0 or 1 / 0 / 1/step]

Moves controller box cooling fan and exhaust cooling fan.

5-804-116

Development: Right: Half Speed

ENG

[0 or 1 / 0 / 1/step]

Moves development intake fan.

5-804-117

Drive Cooling/ Main/ Toner Supply Cooling Fan

ENG

[0 or 1 / 0 / 1/step]

Moves drive cooling fan (not included in this machine), main exhaust fan (not included in this machine), and toner supply cooling fan.

5-804-118

Development: Right

ENG

[0 or 1 / 0 / 1/step]

Moves development intake fan.

5-804-119

Development Solenoid

ENG

[0 or 1 / 0 / 1/step]

Moves development solenoid.

5804

[OUTPUT Check]

Moves development motor.

5-804-128

Development Motor FC: Standard Speed

ENG

[0 or 1 / 0 / 1/step]

5-804-130

Development Motor FC: Low Speed

ENG

5804

[OUTPUT Check]


Moves/Stops PCU motor :CMY.

* Execute this SP after correcting the cam position so that ITB contact/separation lever of the color station is released.

5-804-132

Drum Motor FC: Standard Speed

ENG

[0 or 1 / 0 / 1/step]

5-804-134

Drum Motor FC: Low Speed

ENG

5804

[OUTPUT Check]

Moves/Stops PCU motor: Black/ ITB drive motor.

* Execute this SP after correcting the cam position so that ITB contact/separation lever of the color station is released.

5-804-136

Transfer Drum Motor K: Standard Speed

ENG

[0 or 1 / 0 / 1/step]

5-804-138

Transfer Drum Motor K: Low Speed

ENG

5804

[OUTPUT Check]

Moves paper transfer contact and release motor.

5-804-140

PTR Contact Motor:CW

ENG

[0 or 1 / 0 / 1/step]

5-804-141

PTR Contact Motor:CCW

ENG

5804

[OUTPUT Check]

Moves ITB contact and release motor (reverse to toner supply motor M).

* Execute this SP after correcting the cam position so that ITB contact/separation lever of the color station is released.

5-804-150

Toner Supply Motor M:CW:(ITB Contact)

ENG

[0 or 1 / 0 / 1/step]

5804

[OUTPUT Check]

Moves relay carry motor (bridge unit)/left paper exit carry motor (left paper exit tray).

5-804-163

Bridge Relay/Left Exit Motor: Normal Speed

ENG

[0 or 1 / 0 / 1/step]

Engine SP Mode Tables

5-804-165

Bridge Relay/Left Exit Motor: Low Speed

ENG


5-804-166

Bridge Relay/Left Ex Mt: Normal Speed Upper

ENG

5804

[OUTPUT Check]

5-804-169

Bridge Junction/Left Exit Junction Solenoid

ENG

[0 or 1 / 0 / 1/step]

Moves relay divide solenoid (bridge unit)/left paper exit divide solenoid (left paper exit tray).

5-804-170

Shift Tray Motor:CW

ENG

[0 or 1 / 0 / 1/step]

Moves shift tray motor.

5-804-171

Shift Tray Motor:CCW

ENG

[0 or 1 / 0 / 1/step]

Moves shift tray motor.

5-804-172

Toner End Sensor: K Power

ENG

[0 or 1 / 0 / 1/step]

Supples power to toner end sensor (K).

5-804-173

Toner End Sensor: FC Power

ENG

[0 or 1 / 0 / 1/step]

Supples power to toner end sensor (FC).

5-804-174

Drum PCL: K

ENG

[0 or 1 / 0 / 1/step]

Lights (PWM drive) the drum PCL (K).

* Continuing the OPC's exposure, it might accumulate damage due to electrostatic locally.

  • If operating QL without rotation, be sure to stop it within 10 seconds.

  • Do rotate the OPC drum when QL is turned on.

5-804-175

Drum PCL: FC

ENG

[0 or 1 / 0 / 1/step]

Lights (PWM drive) the drum PCL (FC).

* Continuing the OPC's exposure, it might accumulate damage due to electrostatic locally.

  • If operating QL without rotation, be sure to stop it within 10 seconds.

  • Do rotate the OPC drum when QL is turned on.

5804

[OUTPUT Check]

Outputs PWM for electrify HVP (DC/AC:Y/M/C/K).

5-804-176

PP: Charge DC: Y

ENG

[0 or 1 / 0 / 1/step]

5-804-177

PP: Charge DC: M

ENG

5-804-178

PP: Charge DC: C

ENG

5-804-179

PP: Charge DC: K

ENG

5-804-180

PP: Charge AC: Y

ENG


[0 or 1 / 0 / 1/step]

This setting is not available for MP C2004/MP C2504

5-804-181

PP: Charge AC: M

ENG

5-804-182

PP: Charge AC: C

ENG

5-804-183

PP: Charge AC: K

ENG

5804

[OUTPUT Check]

Outputs PWM for develop HVP.

5-804-184

PP: Development: Y

ENG

[0 or 1 / 0 / 1/step]

5-804-185

PP: Development: M

ENG

5-804-186

PP: Development: C

ENG

5-804-187

PP: Development: K

ENG

5804

[OUTPUT Check]

Outputs PWM for transfer HVP (image transfer: Y/M/C/K).

5-804-195

PP: ITB: Y

ENG

[0 or 1 / 0 / 1/step]

5-804-196

PP: ITB: M

ENG

5-804-197

PP: ITB: C

ENG

5-804-198

PP: ITB: K

ENG

5804

[OUTPUT Check]

Outputs PWM for transfer HVP (paper transfer: +/-).

5-804-199

PP: PTR: +

ENG

[0 or 1 / 0 / 1/step]

5-804-200

PP: PTR: -

ENG

Engine SP Mode Tables

< Previous page: Part 32 | You are viewing page: Part 33 | Next page: Part 34 >