1-111-006 | Job High Temp. Correction | *ENG | [0 to 100 / 0 / 0.1deg/step] |
1-111-007 | Job Low Temp. Correction:Sp. | *ENG | [0 to 10 / 0.7 / 0.1deg/step] |
1-111-008 | Job High Temp. Correction:Sp. | *ENG | [0 to 100 / 0 / 0.1deg/step] |
1-111-011 | Standard Environment Temp. | *ENG | [10 to 30 / 23 / 1deg/step] |
1112 | [Image Processing Temp. Correct] | ||
1-112-001 | Temp.:Plain:Center:Level1/2 | *ENG | [-20 to 20 / 0 / 1deg/step] |
1-112-002 | Temp.:Plain:Center:Energy | *ENG | [-30 to 20 / * / 1deg/step] |
Saving | *MP C2004: | ||
*NA: -12, EU: -14, Asia: -14, CHN: | |||
-14, TWN: -12, KOR: -14 | |||
*MP C2504: | |||
*NA: -9, EU: -11, Asia: -11, CHN: | |||
-11, TWN: -9 , KOR: -11 |
1113 | [Curl Correction] | ||
1-113-001 | Execute Pattern | *ENG | [0 to 2 / 0 / 1/step] 0: OFF 1: ON(No Decurl) 2: ON |
1-113-002 | Humidity:Threshold:M-humid | *ENG | [0 to 100 / 1 / 1%/step] |
1-113-003 | Humidity:Threshold:H-humid | *ENG | [0 to 100 / 65 / 1%/step] |
1-113-004 | Permit Temp.:Delta:Press:M-humid | *ENG | [0 to 200 / 60 / 1deg/step] |
1-113-005 | Permit Temp.:Delta:Press:H-humid | *ENG | [0 to 200 / 50 / 1deg/step] |
1-113-006 | Permit Temp.:Delta:Press:M-humid:No Decurl | *ENG | [0 to 200 / 50 / 1deg/step] |
1-113-007 | Permit Temp.:Delta:Press:H-humid:No Decurl | *ENG | [0 to 200 / 40 / 1deg/step] |
1-113-008 | CPM:M-humid | *ENG | [0 to 100 / 80 / 1%/step] |
1-113-009 | CPM:H-humid | *ENG | [0 to 100 / 65 / 1%/step] |
1-113-010 | CPM:M-humid:No Decurl | *ENG | [0 to 100 / 80 / 1%/step] |
1-113-011 | CPM:H-humid:No Decurl | *ENG | [0 to 100 / 65 / 1%/step] |
Engine SP Mode Tables
1114 | [Heat Storage Status] | ||
1-114-001 | Temp.:Threshold:Press | *ENG | [0 to 200 / 80 / 1deg/step] |
1-114-002 | Temp.Threshold:Atmosphere | *ENG | [0 to 200 / 40 / 1deg/step] |
1-114-003 | Temp.:Threshold:CPM Down | *ENG | [0 to 200 / 60 / 1deg/step] |
1-114-004 | Temp.:Threshold:Voltage Detection | *ENG | [0 to 200 / 40 / 1deg/step] |
1115 | [Target Temp. Correction] | ||
1-115-001 | Temp.:Delta:End | *ENG | [-100 to 100 / 0 / 1deg/step] |
1116 | [Heat Storage FB Control] | ||
1-116-001 | Execution mode | *ENG | [0 to 2 / 2 / 1/step] |
1-116-002 | Correction Formula Judge Temp | *ENG | [0 to 200 / 97 / 1deg/step] |
1-116-003 | Heat Gap Correction Temp | *ENG | [0 to 200 / 0 / 1deg/step] |
1-116-011 | Time Out | *ENG | [0 to 500 / 10 / 1sec/step] |
1-116-012 | Time Out:Energy Saving | *ENG | [0 to 500 / 10 / 1sec/step] |
1-116-021 | Delay:Standard Speed:FC:1 | *ENG | [0 to 20000 / 3590 / 1msec/step] |
1-116-022 | Delay:Standard Speed:BW:1 | *ENG | [0 to 20000 / 1320 / 1msec/step] |
1-116-023 | Delay:Mid. Speed:FC:1 | *ENG | [0 to 20000 / 3590 / 1msec/step] |
1-116-024 | Delay:Mid. Speed:BW:1 | *ENG | [0 to 20000 / 1320 / 1msec/step] |
1-116-025 | Delay:Low Speed:FC:1 | *ENG | [0 to 20000 / 7180 / 1msec/step] |
1-116-026 | Delay:Low Speed:BW:1 | *ENG | [0 to 20000 / 2640 / 1msec/step] |
1-116-031 | Delay:Standard Speed:FC:2 | *ENG | [0 to 20000 / 3590 / 1msec/step] |
1-116-032 | Delay:Standard Speed:BW:2 | *ENG | [0 to 20000 / 1320 / 1msec/step] |
1-116-033 | Delay:Mid. Speed:FC:2 | *ENG | [0 to 20000 / 3590 / 1msec/step] |
1-116-034 | Delay:Mid. Speed:BW:2 | *ENG | [0 to 20000 / 1320 / 1msec/step] |
1-116-035 | Delay:Low Speed:FC:2 | *ENG | [0 to 20000 / 7180 / 1msec/step] |
1-116-036 | Delay:Low Speed:BW:2 | *ENG | [0 to 20000 / 2640 / 1msec/step] |
1-116-041 | Press Reference Temp. | *ENG | [0 to 200 / 86 / 1deg/step] |
1-116-042 | Temp. Correction Lower Limit | *ENG | [-30 to 0 / 0 / 1deg/step] |
1-116-043 | Temp. Correction Upper Limit | *ENG | [0 to 30 / 4 / 1deg/step] |
1-116-044 | Press Reference Temp.:Energy Saving | *ENG | [0 to 200 / 75 / 1deg/step] |
1-116-045 | Temp. Corr. Lower Limit:Energy Saving | *ENG | [-30 to 0 / -1 / 1deg/step] |
1-116-046 | Temp. Corr. Upper Limit:Energy Saving | *ENG | [0 to 30 / 0 / 1deg/step] |
1-116-051 | Paper Thickness Coefficient:Plain1 | *ENG | [-100 to 100 / * / 1/step] *MP C2004: -20 *MP C2504: -30 |
1-116-052 | Paper Thickness Coefficient:Plain2 | *ENG | [-100 to 100 / -40 / 1/step] |
1-116-053 | Paper Thickness Coeff.:Thin | *ENG | [-100 to 100 / * / 1/step] *MP C2004: -20 *MP C2504: -40 |
1-116-054 | Paper Thickness Coeff.:M-thick | *ENG | [-100 to 100 / * / 1/step] *MP C2004: -60 *MP C2504: -50 |
1-116-073 | Paper Thickness Coeff.:Low Speed | *ENG | [-100 to 100 / 0 / 1/step] |
1-116-074 | Paper Thickness Coeff.:Plain1/2:Energy Save | *ENG | [-100 to 100 / 30 / 1/step] |
Engine SP Mode Tables
1117 | [Repeat Temp. Correction] DFU | ||
1-117-001 | Control Time 1:A3 | *ENG | [0 to 300 / 0 / 1sec/step] |
1-117-002 | Control Time 2:A3 | *ENG | [0 to 300 / 4 / 1sec/step] |
1-117-003 | Temp.:Center:1:A3 | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-117-004 | Temp.:End:1:A3 | *ENG | [-30 to 30 / 5 / 1deg/step] |
1-117-005 | Temp.:Center:2:A3 | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-117-006 | Temp.:End:2:A3 | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-117-011 | Control Time 1:DLT | *ENG | [0 to 300 / 0 / 1sec/step] |
1-117-012 | Control Time 2:DLT | *ENG | [0 to 300 / 0 / 1sec/step] |
1-117-013 | Temp.:Center:1:DLT | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-117-014 | Temp.:End:1:DLT | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-117-015 | Temp.:Center:2:DLT | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-117-016 | Temp.:End:2:DLT | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-117-021 | Control Time 1:B4 | *ENG | [0 to 300 / 0 / 1sec/step] |
1-117-022 | Control Time 2:B4 | *ENG | [0 to 300 / 10 / 1sec/step] |
1-117-023 | Temp.:Center:1:B4 | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-117-024 | Temp.:End:1:B4 | *ENG | [-30 to 30 / 25 / 1deg/step] |
1-117-025 | Temp.:Center:2:B4 | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-117-026 | Temp.:End:2:B4 | *ENG | [-30 to 30 / 25 / 1deg/step] |
1-117-031 | Control Time 1:LT | *ENG | [0 to 300 / 0 / 1sec/step] |
1-117-032 | Control Time 2:LT | *ENG | [0 to 300 / 0 / 1sec/step] |
1-117-033 | Temp.:Center:1:LT | *ENG | [-30 to 30 / 6 / 1deg/step] |
1-117-034 | Temp.:End:1:LT | *ENG | [-30 to 30 / 21 / 1deg/step] |
1-117-035 | Temp.:Center:2:LT | *ENG | [-30 to 30 / 6 / 1deg/step] |
1-117-036 | Temp.:End:2:LT | *ENG | [-30 to 30 / 21 / 1deg/step] |
1-117-041 | Control Time 1:Energy Saving | *ENG | [0 to 300 / 0 / 1sec/step] |
1-117-042 | Control Time 2:Energy Saving | *ENG | [0 to 300 / 40 / 1sec/step] |
1-117-043 | Temp.:Center:1:Energy Saving | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-117-044 | Temp.:End:1:Energy Saving | *ENG | [-30 to 30 / * / 1deg/step] *NA: 1, EU: 3, Asia: 1, CHN: 1, TWN: 3, KOR: 1 |
1-117-045 | Temp.:Center:2:Energy Saving | *ENG | [-30 to 30 / 9 / 1deg/step] |
1-117-046 | Temp.:End:2:Energy Saving | *ENG | [-30 to 30 / 11 / 1deg/step] |
1-117-051 | Control Time 1:A4 | *ENG | [0 to 300 / 0 / 1sec/step] |
1-117-052 | Control Time 2:A4 | *ENG | [0 to 300 / 120 / 1sec/step] |
1-117-053 | Temp.:Center:1:A4 | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-117-054 | Temp.:End:1:A4 | *ENG | [-30 to 30 / 21 / 1deg/step] |
1-117-055 | Temp.:Center:2:A4 | *ENG | [-30 to 30 / * / 1deg/step] *NA: 6, EU: 0, Asia: 0, CHN: 0, TWN: 6, KOR: 0 |
1-117-056 | Temp.:End:2:A4 | *ENG | [-30 to 30 / -30 / 1deg/step] |
1-117-061 | Control Time 1:A3:M-thick | *ENG | [0 to 300 / 0 / 1sec/step] |
1-117-062 | Control Time 2:A3:M-thick | *ENG | [0 to 300 / 0 / 1sec/step] |
1-117-063 | Temp.:Center:1:A3:M-thick | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-117-064 | Temp.:End:1:A3:M-thick | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-117-065 | Temp.:Center:2:A3:M-thick | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-117-066 | Temp.:End:2:A3:M-thick | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-117-071 | Control Time 1:DLT:M-thick | *ENG | [0 to 300 / 0 / 1sec/step] |
1-117-072 | Control Time 2:DLT:M-thick | *ENG | [0 to 300 / 0 / 1sec/step] |
1-117-073 | Temp.:Center:1:DLT:M-thick | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-117-074 | Temp.:End:1:DLT:M-thick | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-117-075 | Temp.:Center:2:DLT:M-thick | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-117-076 | Temp.:End:2:DLT:M-thick | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-117-081 | Control Time 1:Envelope:Long | *ENG | [0 to 300 / 0 / 1sec/step] |
1-117-082 | Control Time 2:Envelope:Long | *ENG | [0 to 300 / 0 / 1sec/step] |
1-117-083 | Temp.:Center:1:Envelope:Long | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-117-084 | Temp.:End:1:Envelope:Long | *ENG | [-30 to 30 / 10 / 1deg/step] |
1-117-085 | Temp.:Center:2:Envelope:Long | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-117-086 | Temp.:End:2:Envelope:Long | *ENG | [-30 to 30 / 10 / 1deg/step] |
1-117-091 | Control Time 1:Envelope:Short | *ENG | [0 to 300 / 0 / 1sec/step] |
1-117-092 | Control Time 2:Envelope:Short | *ENG | [0 to 300 / 0 / 1sec/step] |
1-117-093 | Temp.:Center:1:Envelope:Short | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-117-094 | Temp.:End:1:Envelope:Short | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-117-095 | Temp.:Center:2:Envelope:Short | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-117-096 | Temp.:End:2:Envelope:Short | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-117-101 | Control Time 1:B5 | *ENG | [0 to 300 / 0 / 1sec/step] |
1-117-102 | Control Time 2:B5 | *ENG | [0 to 300 / 0 / 1sec/step] |
1-117-103 | Temp.:Center:1:B5 | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-117-104 | Temp.:End:1:B5 | *ENG | [-125 to 30 / -125 / 1deg/step] |
Engine SP Mode Tables
1-117-105 | Temp.:Center:2:B5 | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-117-106 | Temp.:End:2:B5 | *ENG | [-125 to 30 / -125 / 1deg/step] |
1-117-111 | Control Time 1:12inch | *ENG | [0 to 300 / 0 / 1sec/step] |
1-117-112 | Control Time 2:12inch | *ENG | [0 to 300 / 0 / 1sec/step] |
1-117-113 | Temp.:Center:1:12inch | *ENG | [-30 to 30 / -2 / 1deg/step] |
1-117-114 | Temp.:End:1:12inch | *ENG | [-30 to 30 / -1 / 1deg/step] |
1-117-115 | Temp.:Center:2:12inch | *ENG | [-30 to 30 / -2 / 1deg/step] |
1-117-116 | Temp.:End:2:12inch | *ENG | [-30 to 30 / -1 / 1deg/step] |
1-117-121 | Control Time 1:12inch:M-thick | *ENG | [0 to 300 / 0 / 1sec/step] |
1-117-122 | Control Time 2:12inch:M-thick | *ENG | [0 to 300 / 0 / 1sec/step] |
1-117-123 | Temp.:Center:1:12inch:M-thick | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-117-124 | Temp.:End:1:12inch:M-thick | *ENG | [-30 to 30 / 4 / 1deg/step] |
1-117-125 | Temp.:Center:2:12inch:M-thick | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-117-126 | Temp.:End:2:12inch:M-thick | *ENG | [-30 to 30 / 4 / 1deg/step] |
1-117-131 | Control Time 1:SRA3 | *ENG | [0 to 300 / 0 / 1sec/step] |
1-117-132 | Control Time 2:SRA3 | *ENG | [0 to 300 / 11 / 1sec/step] |
1-117-133 | Temp.:Center:1:SRA3 | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-117-134 | Temp.:End:1:SRA3 | *ENG | [-30 to 30 / 30 / 1 / deg |
1-117-135 | Temp.:Center:2:SRA3 | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-117-136 | Temp.:End:2:SRA3 | *ENG | [-30 to 30 / 17 / 1deg/step] |
1-117-141 | Control Time 1:SRA3:M-thick | *ENG | [0 to 300 / 0 / 1sec/step] |
1-117-142 | Control Time 2:SRA3:M-thick | *ENG | [0 to 300 / 11 / 1sec/step] |
1-117-143 | Temp.:Center:1:SRA3:M-thick | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-117-144 | Temp.:End:1:SRA3:M-thick | *ENG | [-30 to 30 / 6 / 1deg/step] |
1-117-145 | Temp.:Center:2:SRA3:M-thick | *ENG | [-30 to 30 / 5 / 1deg/step] |
1-117-146 | Temp.:End:2:SRA3:M-thick | *ENG | [-30 to 30 / 8 / 1deg/step] |
1-117-151 | Control Time 1:A3:Low | *ENG | [0 to 300 / 0 / 1sec/step] |
1-117-152 | Control Time 2:A3:Low | *ENG | [0 to 300 / 0 / 1sec/step] |
1-117-153 | Temp.:Center:1:A3:Low | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-117-154 | Temp.:End:1:A3:Low | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-117-155 | Temp.:Center:2:A3:Low | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-117-156 | Temp.:End:2:A3:Low | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-117-161 | Control Time 1:DLT:Low | *ENG | [0 to 300 / 0 / 1sec/step] |
1-117-162 | Control Time 2:DLT:Low | *ENG | [0 to 300 / 0 / 1sec/step] |
1-117-163 | Temp.:Center:1:DLT:Low | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-117-164 | Temp.:End:1:DLT:Low | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-117-165 | Temp.:Center:2:DLT:Low | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-117-166 | Temp.:End:2:DLT:Low | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-117-171 | Control Time 1:A4LEF | *ENG | [0 to 300 / 0 / 1sec/step] |
1-117-172 | Control Time 2:A4LEF | *ENG | [0 to 300 / 0 / 1sec/step] |
1-117-173 | Temp.:Center:1:A4LEF | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-117-174 | Temp.:End:1:A4LEF | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-117-175 | Temp.:Center:2:A4LEF | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-117-176 | Temp.:End:2:A4LEF | *ENG | [-30 to 30 / 0 / 1deg/step] |
Engine SP Mode Tables
1118 | [Before Job Temp. Correct] | ||
1-118-001 | Temp.:Center:12inch | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-118-002 | Temp.:End:12inch | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-118-003 | Temp.:Center:A3 | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-118-004 | Temp.:End:A3 | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-118-005 | Temp.:Center:DLT | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-118-006 | Temp.:End:DLT | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-118-007 | Temp.:Center:SRA3 | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-118-008 | Temp.:End:SRA3 | *ENG | [-30 to 30 / 17 / 1deg/step] |
1-118-011 | Temp.:Center:12inch:M-thick | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-118-012 | Temp.:End:12inch:M-thick | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-118-013 | Temp.:Center:A3:M-thick | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-118-014 | Temp.:End:A3:M-thick | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-118-015 | Temp.:Center:DLT:M-thick | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-118-016 | Temp.:End:DLT:M-thick | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-118-017 | Temp.:Center:SRA3:M-thick | *ENG | [-30 to 30 / 3 / 1deg/step] |
1-118-018 | Temp.:End:SRA3:M-thick | *ENG | [-30 to 30 / 6 / 1deg/step] |
1-118-021 | Temp.:Center:12inch:Thick | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-118-022 | Temp.:End:12inch:Thick | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-118-023 | Temp.:Center:A3:Thick | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-118-024 | Temp.:End:A3:Thick | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-118-025 | Temp.:Center:DLT:Thick | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-118-026 | Temp.:End:DLT:Thick | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-118-027 | Temp.:Center:SRA3:Thick | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-118-028 | Temp.:End:SRA3:Thick | *ENG | [-30 to 30 / 20 / 1deg/step] |
1120 | [Reserve SP] | ||
1-120-001 | Recovery mode SW:Low Temp | *ENG | [0 to 1 / 0 / 1deg/step] |
1-120-002 | Recovery mode SW:Voltage:Low | *ENG | [0 to 1 / 0 / 1 deg/step] |
1-120-003 | UC3 | *ENG | [0 to 255 / 0 / 1deg/step] |
1-120-004 | UC4 | *ENG | [0 to 255 / 0 / 1deg/step] |
1-120-005 | Ini. CPM Down Time:High Power | *ENG | [0 to 255 / 2 / 1sec/step] |
1-120-006 | Ini. CPM Down Time:Mid.Power | *ENG | [0 to 255 / 2 / 1sec/step] |
1-120-007 | Ini. CPM Down Time:Voltage:Low | *ENG | [0 to 255 / 2 / 1sec/step] |
1-120-008 | Ini. CPM Down Time:Low Temp | *ENG | [0 to 255 / 2 / 1sec/step] |
1-120-009 | Temp.:Center:3:DLT:Voltage:Low | *ENG | [0 to 30 / 0 / 1deg/step] |
1-120-010 | Temp.:End:3:DLT:Voltage:Low | *ENG | [0 to 30 / 0 / 1deg/step] |
1-120-011 | Control Time 1:DLT:Voltage:Low | *ENG | [0 to 300 / 0 / 1sec/step] |
1-120-012 | Control Time 2:DLT:Voltage:Low | *ENG | [0 to 300 / 0 / 1sec/step] |
1-120-013 | Control Time 3:DLT:Voltage:Low | *ENG | [0 to 300 / 0 / 1sec/step] |
1-120-014 | Control Time 1:DLT:Voltage:Low | *ENG | [0 to 300 / 0 / 1sec/step] |
1-120-015 | Control Time 2:DLT:Voltage:Low | *ENG | [0 to 300 / 0 / 1sec/step] |
1-120-016 | Control Time 3:DLT:Voltage:Low | *ENG | [0 to 300 / 0 / 1sec/step] |
1-120-017 | UW7 | *ENG | [0 to 60000 / 0 / 1msec/step] |
1-120-018 | UW8 | *ENG | [0 to 60000 / 0 / 1msec/step] |
1-120-019 | Temp.:End:2:DLT:Voltage:Low | *ENG | [0 to 100.00 / 0 / 0.01sec/step] |
1-120-020 | Temp.:Center:3:DLT:Voltage:Low | *ENG | [0 to 100.00 / 0 / 0.01sec/step] |
1-120-021 | Temp.:Center:1:DLT:Voltage:Low | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-120-022 | Temp.:End:1:DLT:Voltage:Low | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-120-023 | Temp.:Center:2:DLT:Voltage:Low | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-120-024 | Temp.:End:2:DLT:Voltage:Low | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-120-025 | Temp.:Center:3:DLT:Voltage:Low | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-120-026 | Temp.:End:3:DLT:Voltage:Low | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-120-027 | Temp.:Center:1:DLT:Voltage:Low | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-120-028 | Temp.:End:1:DLT:Voltage:Low | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-120-029 | Temp.:Center:2:DLT:Voltage:Low | *ENG | [-30 to 30 / 0 / 1deg/step] |
1-120-030 | Temp.:End:2:DLT:Voltage:Low | *ENG | [-30 to 30 / 0 / 1deg/step] |
Engine SP Mode Tables
1121 | [Switch:Rotation Start/Stop] | ||
1-121-001 | Time:After Reload | *ENG | [0 to 100 / 30 / 1sec/step] |
1-121-002 | Time:After Recovery | *ENG | [0 to 100 / 15 / 1sec/step] |
1-121-004 | Press Temp.:After Reload | *ENG | [0 to 160 / 160 / 1deg/step] |
1-121-005 | End Temp.:After Job:SRA3 | *ENG | [100 to 250 / 200 / 1deg/step] |
1-121-006 | ShiftTemp:After Job:PressEdge:A3 | *ENG | [100 to 250 / 200 / 1deg/step] |
1-121-007 | ShiftTemp:After Job:PressEdge:DLT | *ENG | [100 to 250 / 200 / 1deg/step] |
1-121-008 | Overshoot Prevent Temp. | *ENG | [0 to 250 / 185 / 1deg/step] |
1-121-009 | Overshoot Prevent Time | *ENG | [0 to 100 / 10 / 1sec/step] |
1-121-010 | End Temp.:After Job:B4 | *ENG | [100 to 250 / 143 / 1deg/step] |
1-121-011 | End Temp.:After Job:LT | *ENG | [100 to 250 / * / 1deg/step] *NA: 210, EU: 153, Asia: 153, CHN: 153, TWN: 210, KOR: 153 |
1-121-012 | End Temp.:After Job:B5 | *ENG | [100 to 250 / 155 / 1deg/step] |
1-121-013 | End Temp.:After Job:A5 | *ENG | [100 to 250 / 155 / 1deg/step] |
1-121-014 | End Temp.:After Job:B6 | *ENG | [100 to 250 / 145 / 1deg/step] |
1-121-015 | ShiftTemp:FC:After Job:PressCenter:A6 | *ENG | [100 to 250 / 160 / 1deg/step] |
1-121-016 | ShiftTemp:Bk:After Job:PressFl-B_Edge:SRA3 | *ENG | [100 to 250 / 200 / 1deg/step] |
1-121-017 | ShiftTemp:Bk:After Job:PressEdge:A3 | *ENG | [100 to 250 / 200 / 1deg/step] |
1-121-018 | ShiftTemp:Bk:After Job:PressEdge:DLT | *ENG | [100 to 250 / 200 / 1deg/step] |
1-121-019 | ShiftTemp:Bk:After Job:PressEdge:B4 | *ENG | [100 to 250 / 148 / 1deg/step] |
1-121-020 | ShiftTemp:Bk:After Job:FusingEdge:LT | *ENG | [100 to 250 / * / 1deg/step] *NA: 215, EU: 153, Asia: 153, CHN: 153, TWN: 215, KOR: 153 |
1-121-021 | Time:After Main Switch On | *ENG | [0 to 100 / 30 / 1sec/step] |
1-121-022 | ShiftTemp:Bk:After Job:PressCenter:B5 | *ENG | [100 to 250 / 160 / 1deg/step] |
1-121-023 | ShiftTemp:Bk:After Job:PressCenter:A5 | *ENG | [100 to 250 / 160 / 1deg/step] |
1-121-024 | ShiftTemp:Bk:After Job:PressCenter:B6 | *ENG | [100 to 250 / 150 / 1deg/step] |
1-121-025 | ShiftTemp:Bk:After Job:PressCenter:A6 | *ENG | [100 to 250 / 150 / 1deg/step] |
1-121-031 | Pre Job Paper Feed Time:FC:A3 | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-121-032 | Soaking Rotary Time:FC:A3 | *ENG | [0 to 100 / 0 / 1sec/step] |
1-121-033 | Pre Job Paper Feed Time:FC:DLT | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-121-034 | Soaking Rotary Time:FC:DLT | *ENG | [0 to 100 / 0 / 1sec/step] |
1-121-035 | Pre Job Paper Feed Time:FC:B4 | *ENG | [0 to 10000 / 235 / 1sec/step] |
1-121-036 | Soaking Rotary Time:FC:B4 | *ENG | [0 to 100 / 15 / 1sec/step] |
1-121-037 | Pre Job Paper Feed Time:FC:LT | *ENG | [0 to 10000 / 250 / 1sec/step] |
1-121-038 | Soaking Rotary Time:FC:LT | *ENG | [0 to 100 / 10 / 1sec/step] |
1-121-039 | Pre Job Paper Feed Time:FC:B5 | *ENG | [0 to 10000 / 180 / 1sec/step] |
1-121-040 | Soaking Rotary Time:FC:B5 | *ENG | [0 to 100 / 15 / 1sec/step] |
Engine SP Mode Tables
1-121-041 | Pre Job Paper Feed Time:FC:A5 | *ENG | [0 to 10000 / 31 / 1sec/step] |
1-121-042 | Soaking Rotary Time:FC:A5 | *ENG | [0 to 100 / 20 / 1sec/step] |
1-121-043 | Pre Job Paper Feed Time:FC:B6 | *ENG | [0 to 10000 / 27 / 1sec/step] |
1-121-044 | Soaking Rotary Time:FC:B6 | *ENG | [0 to 100 / 25 / 1sec/step] |
1-121-045 | Pre Job Paper Feed Time:FC:A6 | *ENG | [0 to 10000 / * / 1sec/step] *NA: 70, EU: 40, Asia: 40, CHN: 40, TWN: 70 , KOR: 40 |
1-121-046 | Soaking Rotary Time:FC:A6 | *ENG | [0 to 100 / 60 / 1sec/step] |
1-121-051 | Pre Job Paper Feed Time:Bk:A3 | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-121-052 | Soaking Rotary Time:Bk:A3 | *ENG | [0 to 100 / 0 / 1sec/step] |
1-121-053 | Pre Job Paper Feed Time:Bk:DLT | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-121-054 | Soaking Rotary Time:Bk:DLT | *ENG | [0 to 100 / 0 / 1sec/step] |
1-121-055 | Pre Job Paper Feed Time:Bk:B4 | *ENG | [0 to 10000 / 235 / 1sec/step] |
1-121-056 | Soaking Rotary Time:Bk:B4 | *ENG | [0 to 100 / 10 / 1sec/step] |
1-121-057 | Pre Job Paper Feed Time:Bk:LT | *ENG | [0 to 10000 / 250 / 1sec/step] |
1-121-058 | Soaking Rotary Time:Bk:LT | *ENG | [0 to 100 / 5 / 1sec/step] |
1-121-059 | Pre Job Paper Feed Time:Bk:B5 | *ENG | [0 to 10000 / 180 / 1sec/step] |
1-121-060 | Soaking Rotary Time:Bk:B5 | *ENG | [0 to 100 / 10 / 1sec/step] |
1-121-061 | Pre Job Paper Feed Time:Bk:A5 | *ENG | [0 to 10000 / 31 / 1sec/step] |
1-121-062 | Soaking Rotary Time:Bk:A5 | *ENG | [0 to 100 / 20 / 1sec/step] |
1-121-063 | Pre Job Paper Feed Time:Bk:B6 | *ENG | [0 to 10000 / 27 / 1sec/step] |
1-121-064 | Soaking Rotary Time:Bk:B6 | *ENG | [0 to 100 / 20 / 1sec/step] |
1-121-065 | Pre Job Paper Feed Time:Bk:A6 | *ENG | [0 to 10000 / 80 / 1sec/step] |
1-121-066 | Soaking Rotary Time:Bk:A6 | *ENG | [0 to 100 / 5 / 1sec/step] |
1-121-080 | Shift Time: AfterReload: LineSpd Dwn | *ENG | [0 to 60 / 10 / 0.1sec/step] |
1-121-101 | Heat Off Time:Start:Warm Up | *ENG | [0 to 60000 / 0 / 1msec/step] |
1-121-102 | Heat Off Time:Start:End of A Control | *ENG | [0 to 600000 / 100000 / 1msec/step] |
1-121-103 | Time After Feeler Edge Detect | *ENG | [0 to 200 / 0 / 1sec/step] |
1-121-114 | Relay ON Temp.:Warm Up | *ENG | [0 to 250 / 200 / 1deg/step] |
1-121-120 | ShiftTemp:Press_Full-Bd Edge:SRA3 | *ENG | [100 to 250 / 220 / 1deg/step] |
1-121-121 | ShiftTemp:PressEdge:A3 | *ENG | [100 to 250 / 215 / 1deg/step] |
1-121-122 | ShiftTemp:PressEdge:DLT | *ENG | [100 to 250 / 205 / 1deg/step] |
1-121-123 | ShiftTemp:PressEdge:B4 | *ENG | [100 to 250 / 215 / 1deg/step] |
1-121-124 | ShiftTemp:FusingEdge:LT | *ENG | [100 to 250 / 225 / 1deg/step] |
1-121-125 | ShiftTemp:PressCenter:B5 | *ENG | [100 to 250 / 220 / 1deg/step] |
1-121-126 | ShiftTemp:PressCenter:A5 | *ENG | [100 to 250 / 210 / 1deg/step] |
1-121-127 | ShiftTemp:PressCenter:B6 | *ENG | [100 to 250 / 210 / 1deg/step] |
1-121-128 | ShiftTemp:PressCenter:A6 | *ENG | [100 to 250 / 210 / 1deg/step] |
Engine SP Mode Tables
1-121-141 | Pre Job Paper Feed Time:A3 | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-121-142 | Soaking Rotary Time:A3 | *ENG | [0 to 100 / 10 / 1sec/step] |
1-121-143 | Pre Job Paper Feed Time:DLT | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-121-144 | Soaking Rotary Time:DLT | *ENG | [0 to 100 / 10 / 1sec/step] |
1-121-145 | Pre Job Paper Feed Time:B4 | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-121-146 | Soaking Rotary Time:B4 | *ENG | [0 to 100 / 10 / 1sec/step] |
1-121-147 | Pre Job Paper Feed Time:LT | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-121-148 | Soaking Rotary Time:LT | *ENG | [0 to 100 / 10 / 1sec/step] |
1-121-149 | Pre Job Paper Feed Time:B5 | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-121-150 | Soaking Rotary Time:B5 | *ENG | [0 to 100 / 10 / 1sec/step] |
1-121-151 | Pre Job Paper Feed Time:A5 | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-121-152 | Soaking Rotary Time:A5 | *ENG | [0 to 100 / 10 / 1sec/step] |
1-121-153 | Pre Job Paper Feed Time:B6 | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-121-154 | Soaking Rotary Time:B6 | *ENG | [0 to 100 / 10 / 1sec/step] |
1-121-155 | Pre Job Paper Feed Time:A6 | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-121-156 | Soaking Rotary Time:A6 | *ENG | [0 to 100 / 10 / 1sec/step] |
1122 | [Standby Rotation Setting] | ||
1-122-001 | Rotation Interval | *ENG | [0 to 240 / 60 / 1min/step] |
1-122-002 | Rotation Time | *ENG | [0.0 to 60.0 / 8.0 / 0.1sec/step] |
1123 | [Paper Jam Rotation Setting] | ||
1-123-001 | Normal Rotation Distance | *ENG | [0 to 10000 / 75 / 1mm/step] |
1-123-002 | Reverse Rotation Distance | *ENG | [0 to 10000 / 25 / 1mm/step] |
Engine SP Mode Tables
1124 | [CPM Down Setting] DFU | ||
1-124-001 | High:Down Temp. | *ENG | [-50 to 0 / -30 / 1deg/step] |
1-124-002 | High:Up Temp. | *ENG | [-50 to 0 / -15 / 1deg/step] |
1-124-003 | Low :1st CPM | *ENG | [10 to 100 / 80 / 1%/step] |
1-124-004 | Low :2nd CPM | *ENG | [10 to 100 / 65 / 1%/step] |
1-124-005 | Low :3rd CPM | *ENG | [10 to 100 / 50 / 1%/step] |
1-124-007 | High:2nd CPM | *ENG | [10 to 100 / 50 / 1%/step] |
1-124-008 | High:3rd CPM | *ENG | [10 to 100 / 30 / 1%/step] |
1-124-009 | High:1st CPM Down Temp.:A3:Press End | *ENG | [100 to 250 / 205 / 1deg/step] |
1-124-010 | High:2nd CPM Down Temp.:A3:Press End | *ENG | [100 to 250 / 210 / 1deg/step] |
1-124-011 | High:3rd CPM Down Temp.:A3:Press End | *ENG | [100 to 250 / 215 / 1deg/step] |
1-124-012 | High:1st CPM Down Temp.:DLT:Press End | *ENG | [100 to 250 / 205 / 1deg/step] |
1-124-013 | High:2nd CPM Down Temp.:DLT:Press End | *ENG | [100 to 250 / 210 / 1deg/step] |
1-124-014 | High:3rd CPM Down Temp.:DLT:Press End | *ENG | [100 to 250 / 215 / 1deg/step] |
1-124-015 | High:1st CPM Down Temp.:B4:Press End | *ENG | [100 to 250 / 200 / 1deg/step] |
1-124-016 | High:2nd CPM Down Temp.:B4:Press End | *ENG | [100 to 250 / 210 / 1deg/step] |
1-124-017 | High:3rd CPM Down Temp.:B4:Press End | *ENG | [100 to 250 / 215 / 1deg/step] |
1-124-018 | High:1st CPM Down Temp.:LT:Fuser End | *ENG | [100 to 250 / 215 / 1deg/step] |
1-124-019 | High:2nd CPM Down Temp.:LT:Fuser End | *ENG | [100 to 250 / 220 / 1deg/step] |
1-124-020 | High:3rd CPM Down Temp.:LT:Fuser End | *ENG | [100 to 250 / 225 / 1deg/step] |
1-124-021 | High:1st CPM Down Temp.:A4:Fuser End | *ENG | [100 to 250 / 215 / 1deg/step] |
1-124-022 | High:2nd CPM Down Temp.:A4:Fuser End | *ENG | [100 to 250 / 220 / 1deg/step] |
1-124-023 | High:3rd CPM Down Temp.:A4:Fuser End | *ENG | [100 to 250 / 225 / 1deg/step] |
1-124-024 | High:1st CPM Down Temp.:B5:Press Center | *ENG | [100 to 250 / 205 / 1deg/step] |
1-124-025 | High:2nd CPM Down Temp.:B5:Press Center | *ENG | [100 to 250 / 210 / 1deg/step] |
1-124-026 | High:3rd CPM Down Temp.:B5:Press Center | *ENG | [100 to 250 / 215 / 1deg/step] |
1-124-027 | High:1st CPM Down Temp.:A5:Press Center | *ENG | [100 to 250 / * / 1deg/step] *NA: 170, EU: 204, Asia: 204, CHN: 204, TWN: 170, KOR: 204 |
1-124-028 | High:2nd CPM Down Temp.:A5:Press Center | *ENG | [100 to 250 / 209 / 1deg/step] |
1-124-029 | High:3rd CPM Down Temp.:A5:Press Center | *ENG | [100 to 250 / 217 / 1deg/step] |
1-124-030 | High:1st CPM Down Temp.:B6:Press Center | *ENG | [100 to 250 / * / 1deg/step] *NA: 180, EU: 209, Asia: 209, CHN: 209, TWN: 180, KOR: 209 |
1-124-031 | High:2nd CPM Down Temp.:B6:Press Center | *ENG | [100 to 250 / * / 1deg/step] *NA: 185, EU: 214, Asia: 214, CHN: 214, TWN: 185, KOR: 214 |
1-124-032 | High:3rd CPM Down Temp.:B6:Press Center | *ENG | [100 to 250 / * / 1deg/step] *NA: 192, EU: 219, Asia: 219, CHN: 29, TWN: 192, KOR: 219 |
1-124-033 | High:1st CPM Down Temp.:A6:Press Center | *ENG | [100 to 250 / * / 1deg/step] *NA: 180, EU: 209, Asia: 209, CHN: 209, TWN: 180, KOR: 209 |
1-124-034 | High:2nd CPM Down Temp.:A6:Press Center | *ENG | [100 to 250 / * / 1deg/step] *NA: 185, EU: 214, Asia: 214, CHN: 214, TWN: 185, KOR: 214 |
1-124-035 | High:3rd CPM Down Temp.:A6:Press Center | *ENG | [100 to 250 / * / 1deg/step] *NA: 192, EU: 219, Asia: 219, CHN: 29, TWN: 192, KOR: 219 |
1-124-036 | High:1st CPM Down Temp.:SRA3:Press End | *ENG | [100 to 250 / 210 / 1deg/step] |
1-124-037 | High:2nd CPM Down Temp.:SRA3:Press End | *ENG | [100 to 250 / 215 / 1deg/step] |
1-124-038 | High:3rd CPM Down Temp.:SRA3:Press End | *ENG | [100 to 250 / 220 / 1deg/step] |
1-124-040 | Low Temp.:1st CPM_2 | *ENG | [10 to 100 / 80 / 1%/step] |
1-124-041 | Low Temp.:2nd CPM_2 | *ENG | [10 to 100 / 65 / 1%/step] |
1-124-042 | Low Temp.:1st CPM_3 | *ENG | [10 to 100 / 80 / 1%/step] |
1-124-043 | Low Temp.:2nd CPM_3 | *ENG | [10 to 100 / 65 / 1%/step] |
1-124-051 | Judging Interval | *ENG | [1 to 250 / 4 / 1sec/step] |
1-124-060 | Ini. CPM Down Time | *ENG | [0 to 255 / 2 / 1sec/step] |
1-124-061 | Ini. CPM Down Time 10sec recovery | *ENG | [0 to 255 / 2 / 1sec/step] |
1-124-071 | L:High:1st Temp.:DLT:Press End | *ENG | [100 to 250 / 205 / 1deg/step] |
Engine SP Mode Tables
1-124-072 | L:High:2nd Temp.:DLT:Press End | *ENG | [100 to 250 / 210 / 1deg/step] |
1-124-073 | L:High:3rd Temp.:DLT:Press End | *ENG | [100 to 250 / 215 / 1deg/step] |
1-124-074 | L:High:4th Temp.:DLT:Press End | *ENG | [100 to 250 / 215 / 1deg/step] |
1-124-075 | L:High:1st Temp.:B4:Press End | *ENG | [100 to 250 / 180 / 1deg/step] |
1-124-076 | L:High:2nd Temp.:B4:Press End | *ENG | [100 to 250 / 180 / 1deg/step] |
1-124-077 | L:High:3rd Temp.:B4:Press End | *ENG | [100 to 250 / 215 / 1deg/step] |
1-124-078 | L:High:4th Temp.:B4:Press End | *ENG | [100 to 250 / 215 / 1deg/step] |
1-124-079 | L:High:1st Temp.:B5:Press Center | *ENG | [100 to 250 / * / 1deg/step] *NA: 155, EU: 193, Asia: 193, CHN: 193, TWN: 205, KOR: 193 |
1-124-080 | L:High:2nd Temp.:B5:Press Center | *ENG | [100 to 250 / * / 1deg/step] *NA: 160, EU: 199, Asia: 199, CHN: 199, TWN: 210, KOR: 199 |
1-124-081 | L:High:3rd Temp.:B5:Press Center | *ENG | [100 to 250 / * / 1deg/step] *NA: 165, EU: 205, Asia: 205, CHN: 205, TWN: 165, KOR: 205 |
1-124-082 | L:High:4th Temp.:B5:Press Center | *ENG | [100 to 250 / * / 1deg/step] *NA: 200, EU: 205, Asia: 205, CHN: 205, TWN: 200, KOR: 205 |
1-124-083 | L:High:1st Temp.:A5:Press Center | *ENG | [100 to 250 / * / 1deg/step] *NA: 160, EU: 193, Asia: 193, CHN: 193, TWN: 160, KOR: 193 |
1-124-084 | L:High:2nd Temp.:A5:Press Center | *ENG | [100 to 250 / * / 1deg/step] *NA: 170, EU: 199, Asia: 199, CHN: 199, TWN: 170, KOR: 199 |
1-124-085 | L:High:3rd Temp.:A5:Press Center | *ENG | [100 to 250 / * / 1deg/step] *NA: 190, EU: 205, Asia: 205, CHN: 205, TWN: 190, KOR: 205 |
1-124-086 | L:High:4th Temp.:A5:Press Center | *ENG | [100 to 250 / * / 1deg/step] *NA: 200, EU: 205, Asia: 205, CHN: 205, TWN: 200, KOR: 205 |
1-124-087 | L:High:1st Temp.:B6:Press Center | *ENG | [100 to 250 / * / 1deg/step] *NA: 155, EU: 191, Asia: 191, CHN: 191, TWN: 155, KOR: 191 |
1-124-088 | L:High:2nd Temp.:B6:Press Center | *ENG | [100 to 250 / * / 1deg/step] *NA: 178, EU: 196, Asia: 196, CHN: 196, TWN: 178, KOR: 196 |
1-124-089 | L:High:3rd Temp.:B6:Press Center | *ENG | [100 to 250 / * / 1deg/step] *NA: 192, EU: 201, Asia: 201, CHN: 201, TWN: 192, KOR: 201 |
1-124-090 | L:High:4th Temp.:B6:Press Center | *ENG | [100 to 250 / * / 1deg/step] *NA: 192, EU: 201, Asia: 201, CHN: 201, TWN: 192, KOR: 201 |
1-124-091 | L:High:1st Temp.:A6:Press Center | *ENG | [100 to 250 / * / 1deg/step] *NA: 155, EU: 191, Asia: 191, CHN: 191, TWN: 155, KOR: 191 |
1-124-092 | L:High:2nd Temp.:A6:Press Center | *ENG | [100 to 250 / * / 1deg/step] *NA: 178, EU: 196, Asia: 196, CHN: 196, TWN: 178, KOR: 196 |
1-124-093 | L:High:3rd Temp.:A6:Press Center | *ENG | [100 to 250 / * / 1deg/step] *NA: 192, EU: 201, Asia: 201, CHN: 201, TWN: 192, KOR: 201 |
1-124-094 | L:High:4th Temp.:A6:Press Center | *ENG | [100 to 250 / * / 1deg/step] *NA: 192, EU: 201, Asia: 201, CHN: 201, TWN: 192, KOR: 201 |
1-124-101 | High:1st CPM Down Time:A3 | *ENG | [0 to 10000 / 10000 / 1sec/step] |
Engine SP Mode Tables
1-124-102 | High:2nd CPM Down Time:A3 | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-124-103 | High:3rd CPM Down Time:A3 | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-124-104 | High:1st CPM Down Time:DLT | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-124-105 | High:2nd CPM Down Time:DLT | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-124-106 | High:3rd CPM Down Time:DLT | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-124-107 | High:1st CPM Down Time:B4 | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-124-108 | High:2nd CPM Down Time:B4 | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-124-109 | High:3rd CPM Down Time:B4 | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-124-110 | High:1st CPM Down Time:LT | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-124-111 | High:2nd CPM Down Time:LT | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-124-112 | High:3rd CPM Down Time:LT | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-124-113 | High:1st CPM Down Time:A4 | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-124-114 | High:2nd CPM Down Time:A4 | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-124-115 | High:3rd CPM Down Time:A4 | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-124-116 | High:1st CPM Down Time:B5 | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-124-117 | High:2nd CPM Down Time:B5 | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-124-118 | High:3rd CPM Down Time:B5 | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-124-119 | High:1st CPM Down Time:A5 | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-124-120 | High:2nd CPM Down Time:A5 | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-124-121 | High:3rd CPM Down Time:A5 | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-124-122 | High:1st CPM Down Time:B6 | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-124-123 | High:2nd CPM Down Time:B6 | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-124-124 | High:3rd CPM Down Time:B6 | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-124-125 | High:1st CPM Down Time:A6 | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-124-126 | High:2nd CPM Down Time:A6 | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-124-127 | High:3rd CPM Down Time:A6 | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-124-128 | High:1st CPM Down Time:SRA3 | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-124-129 | High:2nd CPM Down Time:SRA3 | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-124-130 | High:3rd CPM Down Time:SRA3 | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-124-151 | High:1st CPM Down Time:A3:Low Speed | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-124-152 | High:2nd CPM Down Time:A3:Low Speed | *ENG | [0 to 10000 / 10000 / 1sec/step] |
Engine SP Mode Tables
1-124-153 | High:3rd CPM Down Time:A3:Low Speed | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-124-154 | High:1st CPM Down Time:DLT:Low Speed | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-124-155 | High:2nd CPM Down Time:DLT:Low Speed | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-124-156 | High:3rd CPM Down Time:DLT:Low Speed | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-124-157 | High:1st CPM Down Time:B4:Low Speed | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-124-158 | High:2nd CPM Down Time:B4:Low Speed | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-124-159 | High:3rd CPM Down Time:B4:Low Speed | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-124-160 | High:1st CPM Down Time:LT:Low Speed | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-124-161 | High:2nd CPM Down Time:LT:Low Speed | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-124-162 | High:3rd CPM Down Time:LT:Low Speed | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-124-163 | High:1st CPM Down Time:A4:Low Speed | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-124-164 | High:2nd CPM Down Time:A4:Low Speed | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-124-165 | High:3rd CPM Down Time:A4:Low Speed | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-124-166 | High:1st CPM Down Time:B5:Low Speed | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-124-167 | High:2nd CPM Down Time:B5:Low Speed | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-124-168 | High:3rd CPM Down Time:B5:Low Speed | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-124-169 | High:1st CPM Down Time:A5:Low Speed | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-124-170 | High:2nd CPM Down Time:A5:Low Speed | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-124-171 | High:3rd CPM Down Time:A5:Low Speed | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-124-172 | High:1st CPM Down Time:B6:Low Speed | *ENG | [0 to 10000 / 60 / 1sec/step] |
1-124-173 | High:2nd CPM Down Time:B6:Low Speed | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-124-174 | High:3rd CPM Down Time:B6:Low Speed | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-124-175 | High:1st CPM Down Time:A6:Low Speed | *ENG | [0 to 10000 / 60 / 1sec/step] |
1-124-176 | High:2nd CPM Down Time:A6:Low Speed | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-124-177 | High:3rd CPM Down Time:A6:Low Speed | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-124-178 | High:1st CPM Down Time:SRA3:Low Speed | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-124-179 | High:2nd CPM Down Time:SRA3:Low Speed | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-124-180 | High:3rd CPM Down Time:SRA3:Low Speed | *ENG | [0 to 10000 / 10000 / 1sec/step] |
1-124-190 | NC:1st CPM:Decreased Temp. | *ENG | [80 to 250 / 123 / 1deg/step] |
1-124-191 | NC:2nd CPM:Decreased Temp. | *ENG | [80 to 250 / 124 / 1deg/step] |
Engine SP Mode Tables
1-124-192 | NC:3rd CPM:Decreased Temp. | *ENG | [80 to 250 / 125 / 1deg/step] |
1-124-193 | NC:1st CPM:Decreased Ratio | *ENG | [10 to 100 / 50 / 1%/step] |
1-124-194 | NC:2nd CPM:Decreased Ratio | *ENG | [10 to 100 / 30 / 1%/step] |
1-124-195 | NC:3rd CPM:Decreased Ratio | *ENG | [10 to 100 / 10 / 1%/step] |
1-124-201 | Low:Down Temp. | *ENG | [-50 to 0 / -30 / 1deg/step] |
1-124-202 | Low:Up Temp. | *ENG | [-50 to 0 / -15 / 1deg/step] |
1-124-203 | High Temp: Decreased Temp: Mid-Low Spd | *ENG | [-50 to 0 / -20 / 1deg/step] |
1-124-204 | High Temp: Increased Temp: Mid-Low Spd | *ENG | [-50 to 0 / -15 / 1deg/step] |
1-124-205 | Low Temp: Decreased Temp: Mid-Low Spd | *ENG | [-50 to 0 / -20 / 1deg/step] |
1-124-206 | Low Temp: Increased Temp: Mid-Low Spd | *ENG | [-50 to 0 / -15 / 1deg/step] |
1-124-210 | Temp.:Threshold::Low Power | *ENG | [0 to 200 / 0 / 1deg/step] |
1-124-211 | CPM Level 2: Judge:Low Power | *ENG | [0 to 200 / 110 / 1deg/step] |
1-124-212 | Temp.:Threshold:Judge:Mid. Power | *ENG | [0 to 200 / 0 / 1deg/step] |
1-124-213 | CPM Level 2: Judge:Mid. Power | *ENG | [0 to 200 / 110 / 1deg/step] |
1-124-214 | Temp.:Threshold:Judge:High Power | *ENG | [0 to 200 / 0 / 1deg/step] |
1-124-215 | CPM Level 2: Judge:High Power | *ENG | [0 to 200 / 110 / 1deg/step] |
1-124-220 | Ini.: HighTemp: DownTemp | *ENG | [-50 to 0 / -30 / 1deg/step] |
1-124-221 | Ini.: HighTemp: UpTemp | *ENG | [-50 to 50 / -15 / 1deg/step] |
1-124-222 | Ini.: LowTemp: DownTemp | *ENG | [-50 to 0 / -30 / 1deg/step] |
1-124-223 | Ini.: LowTemp: UpTemp | *ENG | [-50 to 50 / -15 / 1deg/step] |
1-124-224 | Ini.: HighTemp: DownTemp: Mid-Low Spd | *ENG | [-50 to 0 / -20 / 1deg/step] |
1-124-225 | Ini.: HighTemp: UpTemp: Mid-Low Spd | *ENG | [-50 to 50 / -15 / 1deg/step] |
1-124-226 | Ini.: LowTemp: DownTemp: Mid-Low Spd | *ENG | [-50 to 0 / -20 / 1deg/step] |
1-124-227 | Ini.: LowTemp: UpTemp: Mid-Low Spd | *ENG | [-50 to 50 / -15 / 1deg/step] |
1-124-241 | L:High:3rd Temp.:SRA3:Press End | *ENG | [100 to 250 / 220 / 1deg/step] |
1-124-242 | L:High:3rd Temp.:A3:Press End | *ENG | [100 to 250 / 215 / 1deg/step] |
1-124-243 | L:High:3rd Temp.:DLT:Press End | *ENG | [100 to 250 / 215 / 1deg/step] |
1-124-244 | L:High:3rd Temp.:B4:Press End | *ENG | [100 to 250 / 215 / 1deg/step] |
1-124-245 | L:High:3rd Temp.:LT:Fuser End | *ENG | [100 to 250 / 225 / 1deg/step] |
1-124-246 | L:High:3rd Temp.:A4:Fuser End | *ENG | [100 to 250 / 225 / 1deg/step] |
1-124-247 | L:High:3rd Temp.:B5:Press Center | *ENG | [100 to 250 / 215 / 1deg/step] |
1-124-248 | L:High:3rd Temp.:A5:Press Center | *ENG | [100 to 250 / 217 / 1deg/step] |
Engine SP Mode Tables
1-124-249 | L:High:3rd Temp.:B6:Press Center | *ENG | [100 to 250 / * / 1deg/step] *NA: 192, EU: 219, Asia: 219, CHN: 219, TWN: 192, KOR: 219 |
1-124-250 | L:High:3rd Temp.:A6:Press Center | *ENG | [100 to 250 / * / 1deg/step] *NA: 192, EU: 219, Asia: 219, CHN: 219, TWN: 192, KOR: 219 |
1125 | [CPM Down Setting] | ||
1-125-001 | High:1st CPM:A3:Large Size:Normal Speed | *ENG | [0 to 100 / 80 / 1%/step] |
1-125-002 | High:2nd CPM:A3:Large Size:Normal Speed | *ENG | [0 to 100 / 50 / 1%/step] |
1-125-003 | High:3rd CPM:A3:Large Size:Normal Speed | *ENG | [0 to 100 / 30 / 1%/step] |
1-125-004 | High:1st CPM:A3:Small Size:Normal Speed | *ENG | [0 to 100 / 80 / 1%/step] |
1-125-005 | High:2nd CPM:A3:Small Size:Normal Speed | *ENG | [0 to 100 / 50 / 1%/step] |
1-125-006 | High:3rd CPM:A3:Small Size:Normal Speed | *ENG | [0 to 100 / 30 / 1%/step] |
1-125-007 | High:1st CPM:DLT:Large Size:Normal Speed | *ENG | [0 to 100 / 80 / 1%/step] |
1-125-008 | High:2nd CPM:DLT:Large Size:Normal Speed | *ENG | [0 to 100 / 50 / 1%/step] |
1-125-009 | High:3rd CPM:DLT:Large Size:Normal Speed | *ENG | [0 to 100 / 30 / 1%/step] |
1-125-010 | High:1st CPM:DLT:Small Size:Normal Speed | *ENG | [0 to 100 / 80 / 1%/step] |
1-125-011 | High:2nd CPM:DLT:Small Size:Normal Speed | *ENG | [0 to 100 / 50 / 1%/step] |
1-125-012 | High:3rd CPM:DLT:Small Size:Normal Speed | *ENG | [0 to 100 / 30 / 1%/step] |
1-125-013 | High:1st CPM:B4:Large Size:Normal Speed | *ENG | [0 to 100 / 80 / 1%/step] |
1-125-014 | High:2nd CPM:B4:Large Size:Normal Speed | *ENG | [0 to 100 / 50 / 1%/step] |
1-125-015 | High:3rd CPM:B4:Large Size:Normal Speed | *ENG | [0 to 100 / 30 / 1%/step] |
1-125-016 | High:1st CPM:B4:Small Size:Normal Speed | *ENG | [0 to 100 / 80 / 1%/step] |
1-125-017 | High:2nd CPM:B4:Small Size:Normal Speed | *ENG | [0 to 100 / 50 / 1%/step] |
1-125-018 | High:3rd CPM:B4:Small Size:Normal Speed | *ENG | [0 to 100 / 30 / 1%/step] |
1-125-019 | High:1st CPM:LT:Large Size:Normal Speed | *ENG | [0 to 100 / 80 / 1%/step] |
1-125-020 | High:2nd CPM:LT:Large Size:Normal Speed | *ENG | [0 to 100 / 50 / 1%/step] |
1-125-021 | High:3rd CPM:LT:Large Size:Normal Speed | *ENG | [0 to 100 / 30 / 1%/step] |
1-125-022 | High:1st CPM:LT:Small Size:Normal Speed | *ENG | [0 to 100 / 80 / 1%/step] |
1-125-023 | High:2nd CPM:LT:Small Size:Normal Speed | *ENG | [0 to 100 / 50 / 1%/step] |
1-125-024 | High:3rd CPM:LT:Small Size:Normal Speed | *ENG | [0 to 100 / 30 / 1%/step] |
1-125-025 | High:1st CPM:A4:Large Size:Normal Speed | *ENG | [0 to 100 / 80 / 1%/step] |
1-125-026 | High:2nd CPM:A4:Large Size:Normal Speed | *ENG | [0 to 100 / 50 / 1%/step] |
Engine SP Mode Tables
1-125-027 | High:3rd CPM:A4:Large Size:Normal Speed | *ENG | [0 to 100 / 30 / 1%/step] |
1-125-028 | High:1st CPM:A4:Small Size:Normal Speed | *ENG | [0 to 100 / 80 / 1%/step] |
1-125-029 | High:2nd CPM:A4:Small Size:Normal Speed | *ENG | [0 to 100 / 50 / 1%/step] |
1-125-030 | High:3rd CPM:A4:Small Size:Normal Speed | *ENG | [0 to 100 / 30 / 1%/step] |
1-125-031 | High:1st CPM:B5:Large Size:Normal Speed | *ENG | [0 to 100 / 80 / 1%/step] |
1-125-032 | High:2nd CPM:B5:Large Size:Normal Speed | *ENG | [0 to 100 / 50 / 1%/step] |
1-125-033 | High:3rd CPM:B5:Large Size:Normal Speed | *ENG | [0 to 100 / 30 / 1%/step] |
1-125-034 | High:1st CPM:B5:Small Size:Normal Speed | *ENG | [0 to 100 / 80 / 1%/step] |
1-125-035 | High:2nd CPM:B5:Small Size:Normal Speed | *ENG | [0 to 100 / 50 / 1%/step] |
1-125-036 | High:3rd CPM:B5:Small Size:Normal Speed | *ENG | [0 to 100 / 30 / 1%/step] |
1-125-037 | High:1st CPM:A5:Normal Speed | *ENG | [0 to 100 / 80 / 1%/step] |
1-125-038 | High:2nd CPM:A5:Normal Speed | *ENG | [0 to 100 / 50 / 1%/step] |
1-125-039 | High:3rd CPM:A5:Normal Speed | *ENG | [0 to 100 / 30 / 1%/step] |
1-125-040 | High:1st CPM:B6:Normal Speed | *ENG | [0 to 100 / 80 / 1%/step] |
1-125-041 | High:2nd CPM:B6:Normal Speed | *ENG | [0 to 100 / 50 / 1%/step] |
1-125-042 | High:3rd CPM:B6:Normal Speed | *ENG | [0 to 100 / 30 / 1%/step] |
1-125-043 | High:1st CPM:A6:Normal Speed | *ENG | [0 to 100 / 80 / 1%/step] |
1-125-044 | High:2nd CPM:A6:Normal Speed | *ENG | [0 to 100 / 50 / 1%/step] |
1-125-045 | High:3rd CPM:A6:Normal Speed | *ENG | [0 to 100 / 30 / 1%/step] |
1-125-046 | High:1st CPM:SRA3:Large Size:Normal Speed | *ENG | [0 to 100 / 80 / 1%/step] |
1-125-047 | High:2nd CPM:SRA3:Large Size:Normal Speed | *ENG | [0 to 100 / 50 / 1%/step] |
1-125-048 | High:3rd CPM:SRA3:Large Size:Normal Speed | *ENG | [0 to 100 / 30 / 1%/step] |
1-125-049 | High:1st CPM:SRA3:Small Size:Normal Speed | *ENG | [0 to 100 / 80 / 1%/step] |
1-125-050 | High:2nd CPM:SRA3:Small Size:Normal Speed | *ENG | [0 to 100 / 50 / 1%/step] |
1-125-051 | High:3rd CPM:SRA3:Small Size:Normal Speed | *ENG | [0 to 100 / 30 / 1%/step] |
1-125-101 | High:1st CPM:A3:Large Size:Middle Speed | *ENG | [0 to 100 / 80 / 1%/step] |
1-125-102 | High:2nd CPM:A3:Large Size:Middle Speed | *ENG | [0 to 100 / 50 / 1%/step] |
1-125-104 | High:1st CPM:A3:Small Size:Middle Speed | *ENG | [0 to 100 / 80 / 1%/step] |
1-125-105 | High:2nd CPM:A3:Small Size:Middle Speed | *ENG | [0 to 100 / 50 / 1%/step] |
1-125-107 | High:1st CPM:DLT:Large Size:Middle Speed | *ENG | [0 to 100 / 80 / 1%/step] |
Engine SP Mode Tables
1-125-108 | High:2nd CPM:DLT:Large Size:Middle Speed | *ENG | [0 to 100 / 50 / 1%/step] |
1-125-110 | High:1st CPM:DLT:Small Size:Middle Speed | *ENG | [0 to 100 / 80 / 1%/step] |
1-125-111 | High:2nd CPM:DLT:Small Size:Middle Speed | *ENG | [0 to 100 / 50 / 1%/step] |
1-125-113 | High:1st CPM:B4:Large Size:Middle Speed | *ENG | [0 to 100 / 80 / 1%/step] |
1-125-114 | High:2nd CPM:B4:Large Size:Middle Speed | *ENG | [0 to 100 / 50 / 1%/step] |
1-125-116 | High:1st CPM:B4:Small Size:Middle Speed | *ENG | [0 to 100 / 80 / 1%/step] |
1-125-117 | High:2nd CPM:B4:Small Size:Middle Speed | *ENG | [0 to 100 / 50 / 1%/step] |
1-125-119 | High:1st CPM:LT:Large Size:Middle Speed | *ENG | [0 to 100 / 80 / 1%/step] |
1-125-120 | High:2nd CPM:LT:Large Size:Middle Speed | *ENG | [0 to 100 / 50 / 1%/step] |
1-125-122 | High:1st CPM:LT:Small Size:Middle Speed | *ENG | [0 to 100 / 80 / 1%/step] |
1-125-123 | High:2nd CPM:LT:Small Size:Middle Speed | *ENG | [0 to 100 / 50 / 1%/step] |
1-125-125 | High:1st CPM:A4:Large Size:Middle Speed | *ENG | [0 to 100 / 80 / 1%/step] |
1-125-126 | High:2nd CPM:A4:Large Size:Middle Speed | *ENG | [0 to 100 / 50 / 1%/step] |
1-125-128 | High:1st CPM:A4:Small Size:Middle Speed | *ENG | [0 to 100 / 80 / 1%/step] |
1-125-129 | High:2nd CPM:A4:Small Size:Middle Speed | *ENG | [0 to 100 / 50 / 1%/step] |
1-125-131 | High:1st CPM:B5:Large Size:Middle Speed | *ENG | [0 to 100 / 80 / 1%/step] |
1-125-132 | High:2nd CPM:B5:Large Size:Middle Speed | *ENG | [0 to 100 / 50 / 1%/step] |
1-125-134 | High:1st CPM:B5:Small Size:Middle Speed | *ENG | [0 to 100 / 80 / 1%/step] |
1-125-135 | High:2nd CPM:B5:Small Size:Middle Speed | *ENG | [0 to 100 / 50 / 1%/step] |
1-125-137 | High:1st CPM:A5:Middle Speed | *ENG | [0 to 100 / 80 / 1%/step] |
1-125-138 | High:2nd CPM:A5:Middle Speed | *ENG | [0 to 100 / 50 / 1%/step] |
1-125-140 | High:1st CPM:B6:Middle Speed | *ENG | [0 to 100 / 60 / 1%/step] |
1-125-141 | High:2nd CPM:B6:Middle Speed | *ENG | [0 to 100 / 50 / 1%/step] |
1-125-143 | High:1st CPM:A6:Middle Speed | *ENG | [0 to 100 / 80 / 1%/step] |
1-125-144 | High:2nd CPM:A6:Middle Speed | *ENG | [0 to 100 / 50 / 1%/step] |
1-125-145 | High:1st CPM:SRA3:Large Size:Middle Speed | *ENG | [0 to 100 / 80 / 1%/step] |
1-125-146 | High:2nd CPM:SRA3:Large Size:Middle Speed | *ENG | [0 to 100 / 50 / 1%/step] |
1-125-147 | High:1st CPM:SRA3:Small Size:Middle Speed | *ENG | [0 to 100 / 80 / 1%/step] |
1-125-148 | High:2nd CPM:SRA3:Small Size:Middle Speed | *ENG | [0 to 100 / 50 / 1%/step] |
1-125-201 | High:1st CPM:A3:Large Size:Low Speed | *ENG | [0 to 100 / 80 / 1%/step] |
Engine SP Mode Tables
1-125-204 | High:1st CPM:A3:Small Size:Low Speed | *ENG | [0 to 100 / 80 / 1%/step] |
1-125-207 | High:1st CPM:DLT:Large Size:Low Speed | *ENG | [0 to 100 / 80 / 1%/step] |
1-125-210 | High:1st CPM:DLT:Small Size:Low Speed | *ENG | [0 to 100 / 80 / 1%/step] |
1-125-213 | High:1st CPM:B4:Large Size:Low Speed | *ENG | [0 to 100 / 80 / 1%/step] |
1-125-216 | High:1st CPM:B4:Small Size:Low Speed | *ENG | [0 to 100 / 80 / 1%/step] |
1-125-219 | High:1st CPM:LT:Large Size:Low Speed | *ENG | [0 to 100 / 80 / 1%/step] |
1-125-222 | High:1st CPM:LT:Small Size:Low Speed | *ENG | [0 to 100 / 80 / 1%/step] |
1-125-225 | High:1st CPM:A4:Large Size:Low Speed | *ENG | [0 to 100 / 80 / 1%/step] |
1-125-228 | High:1st CPM:A4:Small Size:Low Speed | *ENG | [0 to 100 / 80 / 1%/step] |
1-125-231 | High:1st CPM:B5:Large Size:Low Speed | *ENG | [0 to 100 / 80 / 1%/step] |
1-125-234 | High:1st CPM:B5:Small Size:Low Speed | *ENG | [0 to 100 / 80 / 1%/step] |
1-125-237 | High:1st CPM:A5:Low Speed | *ENG | [0 to 100 / 80 / 1%/step] |
1-125-240 | High:1st CPM:B6:Low Speed | *ENG | [0 to 100 / 83 / 1%/step] |
1-125-243 | High:1st CPM:A6:Low Speed | *ENG | [0 to 100 / 93 / 1%/step] |
1-125-244 | High:1st CPM:SRA3:Large Size:Low Speed | *ENG | [0 to 100 / 80 / 1%/step] |
1126 | [Heating Start Delay] | ||
1-126-001 | Judgement Temp 1 | *ENG | [0 to 180 / 30 / 1deg/step] |
1-126-002 | Judgement Temp 2 | *ENG | [0 to 180 / 32 / 1deg/step] |
1-126-003 | Judgement Temp 3 | *ENG | [0 to 180 / 45 / 1deg/step] |
1-126-011 | Set TimeA: Div 1 | *ENG | [0 to 10000 / * / 1msec/step] *NA: 1100, EU: 1500, Asia: 1500, CHN: 1500, TWN: 1100, KOR: 1500 |
1-126-012 | Set TimeA: Div 2 | *ENG | [0 to 10000 / * / 1msec/step] *NA: 1600, EU: 2200, Asia: 2200, CHN: 2200, TWN: 1600, KOR: 2200 |
1-126-013 | Set TimeA: Div 3 | *ENG | [0 to 10000 / * / 1msec/step] *NA: 1900, EU: 2500, Asia: 2500, CHN: 2500, TWN: 1900, KOR: 2500 |
1-126-014 | Set TimeA: Div 4 | *ENG | [0 to 10000 / * / 1msec/step] *NA: 1100, EU: 1500, Asia: 1500, CHN: 1500, TWN: 1100, KOR: 1500 |
1-126-021 | Delay Time: Div 1 | *ENG | [0 to 10000 / * / 1msec/step] *NA: 1100, EU: 1500, Asia: 1500, CHN: 1500, TWN: 1100, KOR: 1500 |
1-126-022 | Delay Time: Div 2 | *ENG | [0 to 10000 / * / 1msec/step] *NA: 1600, EU: 2200, Asia: 2200, CHN: 2200, TWN: 1600, KOR: 2200 |
1-125-245 | High:1st CPM:SRA3:Small Size:Low Speed | *ENG | [0 to 100 / 80 / 1%/step] |
Engine SP Mode Tables
1-126-023 | Delay Time: Div 3 | *ENG | [0 to 10000 / * / 1msec/step] *NA: 1900, EU: 2500, Asia: 2500, CHN: 2500, TWN: 1900, KOR: 2500 |
1-126-024 | Delay Time: Div 4 | *ENG | [0 to 10000 / * / 1msec/step] *NA: 1100, EU: 1500, Asia: 1500, CHN: 1500, TWN: 1100, KOR: 1500 |
1127 | [Energy Saving PprFeed Judgment] | ||
1-127-001 | Judging Method Change | ENG | [0 to 2 / 1 / 1/step] |
1-127-002 | Temp.: Threshold: Press | ENG | [0 to 200 / 50 / 1deg/step] |
1-127-003 | Temp.: Threshold: Atmosphere | ENG | [0 to 200 / 60 / 1deg/step] |
1-127-004 | Power Supply Voltage: Lower | ENG | [0 to 300 / * / 1V/step] *NA: 108, EU: 206, Asia: 206, CHN: 206, TWN: 102 , KOR: 206 |
1-127-005 | Power Supply Voltage: Upper | ENG | [0 to 300 / * / 1V/step] *NA: 134, EU: 252, Asia: 252, CHN: 252, TWN: 121 , KOR: 252 |
1-127-006 | Judgment Time-Out | ENG | [0 to 10.0 / 10.0 / 0.1sec/step] |
1131 | [Continuous Print Mode Switch] | ||
1-131-001 | Feed Permit Condition | *ENG | [0 to 2 / 1 / 1/step] 0: Productivity Mode 1: Fusing Quality Mode 2: Fusing Quality Mode 2 |
1132 | [Maximum Duty Switch] | ||
1-132-001 | Control Method Switch | *ENG | [0 or 1 / 1 / 1/step] 0: Fixed Duty 1: AutoOffstCtl |
Engine SP Mode Tables
1133 | [Voltage Detection] | ||
1-133-001 | Heater ON | *ENG | [0 to 350.0 / * / 0.1V/step] *NA: 116.0, EU: 223.0, Asia: 223.0, CHN: 223.0, TWN: 107.0 , KOR: 223.0 |
1-133-002 | Max | *ENG | [0 to 350.0 / 0 / 0.1V/step] |
1-133-003 | Min | *ENG | [0 to 350.0 / 350.0 / 0.1V/step] |
1-133-004 | Last | *ENG | [0 to 350.0 / 0 / 0.1V/step] |
1-133-005 | SC | *ENG | [0 to 350.0 / 0 / 0.1V/step] |
1-133-006 | Threshold Voltage | *ENG | [0 to 255 / * / 1V/step] *NA: 96, EU: 178, Asia: 178, CHN: 178, TWN: 88 , KOR: 178 |
1134 | [Effective Duty Adjustment] | ||
1-134-001 | Control Method Switch | *ENG | [0 or 1 / 1 / 1/step] 0: OFF 1: ON |
1135 | [Inrush Control] | ||
1-135-001 | Inrush Control | *ENG | [0 or 1 / 0 / 1/step] 0: Normal (Do not) 1: Inrush current suppress (Do) |
1135 | [Inrush Control] | ||
1-135-002 | Flicker Control | *ENG | [0 or 1 / 0 / 1/step] |
1141 | [Fusing SC Error Time Info] | ||
1-141-001 | SC Number | *ENG | [0 to 99999 / 0 / 1/step] |
1-141-101 | Htg Roller:Ctr Det1 | *ENG | [-100 to 300 / 0 / 1deg/step] |
1-141-102 | Htg Roller:End Det1 | *ENG | [-100 to 300 / 0 / 1deg/step] |
1-141-103 | Press Roller:Ctr Det1 | *ENG | [-100 to 300 / 0 / 1deg/step] |
1-141-104 | Press Roller:End Det1 | *ENG | [-100 to 300 / 0 / 1deg/step] |
1-141-105 | NC Sensor: Center Atmosphere Temp 1 | *ENG | [-100 to 300 / 0 / 1deg/step] |
1-141-106 | NC Sensor: End Atmosphere Temp 1 | *ENG | [-100 to 300 / 0 / 1deg/step] |
1-141-151 | Htg Roller:Ctr Det2 | *ENG | [-100 to 300 / 0 / 1deg/step] |
1-141-152 | Htg Roller:End Det2 | *ENG | [-100 to 300 / 0 / 1deg/step] |
1-141-153 | Press Roller:Ctr Det2 | *ENG | [-100 to 300 / 0 / 1deg/step] |
1-141-154 | Press Roller:End Det2 | *ENG | [-100 to 300 / 0 / 1deg/step] |
1-141-155 | NC Sensor: Center Atmosphere Temp 2 | *ENG | [-100 to 300 / 0 / 1deg/step] |
1-141-156 | NC Sensor: End Atmosphere Temp 2 | *ENG | [-100 to 300 / 0 / 1deg/step] |
1-141-201 | Htg Roller:Ctr Det3 | *ENG | [-100 to 300 / 0 / 1deg/step] |
1-141-202 | Htg Roller:End Det3 | *ENG | [-100 to 300 / 0 / 1deg/step] |
1-141-203 | Press Roller:Ctr Det3 | *ENG | [-100 to 300 / 0 / 1deg/step] |
1-141-204 | Press Roller:End Det3 | *ENG | [-100 to 300 / 0 / 1deg/step] |
1-141-205 | NC Sensor: Center Atmosphere Temp 3 | *ENG | [-100 to 300 / 0 / 1deg/step] |
1-141-206 | NC Sensor: End Atmosphere Temp 3 | *ENG | [-100 to 300 / 0 / 1deg/step] |
1142 | [Fusing Jam Detection] | ||
1-142-001 | SC Display | *ENG | [0 or 1 / 0 / 1/step] 0: OFF 1: ON |
1-151-001 | Pressure Change ON/OFF | *ENG | [0 or 1 / 1 / 1/step] 0: OFF 1: ON |
1-151-002 | Pressure Time1 | *ENG | [0 to 10000 / 70 / 10msec/step] |
1-151-003 | Pressure Time2 | *ENG | [0 to 10000 / 70 / 10msec/step] |
1-151-005 | Depressure Time | *ENG | [0 to 10000 / 0 / 10msec/step] |
1-151-010 | Shift Time:Energy Saving | *ENG | [0 to 3600 / 0 / 1sec/step] |
1-151-011 | Shift Time | *ENG | [0 to 3600 / 60 / 1sec/step] |
1-151-051 | Rotary speed | *ENG | [-12.8 to 12.7 / 0 / 0.1%/step] |
1-151-101 | Pressure:Plain1/2 | *ENG | [0 to 3 / 2 / 1/step] |
1-151-102 | Pressure:Thin | *ENG | [0 to 3 / 2 / 1/step] |
1-151-103 | Pressure:M-thick | *ENG | [0 to 3 / 2 / 1/step] |
1-151-104 | Pressure:Thick1 | *ENG | [0 to 3 / 2 / 1/step] |
1-151-105 | Pressure:Thick2 | *ENG | [0 to 3 / 2 / 1/step] |
1-151-106 | Pressure:Thick3 | *ENG | [0 to 3 / 2 / 1/step] |
1-151-107 | Pressure:Special1 | *ENG | [0 to 3 / 2 / 1/step] |
1-151-108 | Pressure:Special2 | *ENG | [0 to 3 / 2 / 1/step] |
1-151-109 | Pressure:Special3 | *ENG | [0 to 3 / 2 / 1/step] |
1-151-110 | Pressure:Envelope | *ENG | [0 to 3 / 2 / 1/step] |
1-151-151 | Pressure:Plain1/2:Low Speed | *ENG | [0 to 3 / 2 / 1/step] |
1-151-152 | Pressure:M-thick:Low Speed | *ENG | [0 to 3 / 2 / 1/step] |
1-151-153 | Pressure:Thick1:Low Speed | *ENG | [0 to 3 / 2 / 1/step] |
1-151-154 | Pressure:Special1:Low Speed | *ENG | [0 to 3 / 2 / 1/step] |
1-151-157 | Pressure:M-thick:Glossy | *ENG | [0 to 3 / 2 / 1/step] |
Engine SP Mode Tables
1-151-158 | Pressure:OHP | *ENG | [0 to 3 / 2 / 1/step] |
1-151-159 | Pressure:Envelope:Low Speed | *ENG | [0 to 3 / 2 / 1/step] |
1-151-160 | Pressure:Thin:Low Speed | *ENG | [0 to 3 / 2 / 1/step] |
1-151-161 | Pressure:Thick4 | *ENG | [0 to 3 / 2 / 1/step] |
1-151-162 | Pressure:Postcard | *ENG | [0 to 3 / 2 / 1/step] |
1152 | [Fusing Nip Band Check] | ||
1-152-001 | Execute | ENG | [0 or 1 / 0 / 1/step] |
1-152-002 | Pre-idling Time | *ENG | [0 to 999 / 300 / 1sec/step] |
1-152-003 | Stop Time | *ENG | [0 to 100 / 20 / 1sec/step] |
1-152-004 | Pressure Position | *ENG | [1 to 2 / 2 / 1/step] |
1153 | [Abnormal Noise Confirmation] | ||
1-153-001 | Unit: Execute | ENG | [0 or 1 / 0 / 1/step] |
1-153-002 | No Unit: Execute | ENG | [0 or 1 / 0 / 1/step] |
1-153-003 | Operation Line Speed | ENG | [0 to 2 / 0 / 1/step] 0: Std Speed 1: Mid Speed 2: Low Speed |
1-153-004 | Operation Time | ENG | [0 to 240 / 60 / 1sec/step] |
1-153-005 | Heat Center Target Temp | ENG | [100 to 180 / 130 / 1deg/step] |
1-153-006 | Heat End Target Temp | ENG | [100 to 180 / 130 / 1deg/step] |
1-153-007 | Press Target Temp | ENG | [0 to 200 / 0 / 1deg/step] |
1154 | [Switch:Rotation Start/Stop] | ||
1-154-001 | Judging Method Change | *ENG | [0 or 1 / 0 / 1/step] 0: On 1: Off |
1155 | [Small Size Paper Control] | ||
1-155-001 | Print Width | *ENG | [0 to 300 / 0 / 1mm/step] |
1-154-005 | Heater ON Timing | *ENG | [0 to 250 / 50 / 1 / 10msec/step] |
1-154-006 | Overshoot Prevent Temp.:SC | *ENG | [0 to 250 / 180 / 1deg/step] |
Engine SP Mode Tables
1157 | [Overshoot Prevent Control] | ||
1-157-001 | Decision Time | *ENG | [0 to 100 / 5 / 1sec/step] |
1-157-002 | Decision Temp. | *ENG | [0 to 250 / 185 / 1deg/step] |
1-157-003 | - | *ENG | [0 to 300 / 15 / 1sec/step] |
1-157-004 | Timeout | *ENG | [0 to 300 / 300 / 1sec/step] |
1161 | [Shading Plate Control] | ||
1-161-001 | Judgment Temp A | ENG | [0 to 250 / 250 / 1deg/step] |
1-161-002 | Judgment Temp B | ENG | [0 to 250 / 250 / 1deg/step] |
1-161-003 | Position Transition Time | ENG | [0 to 10000 / 1000 / 1msec/step] |
1-161-004 | After Transition Time Out | ENG | [0 to 20000 / 0 / 1msec/step] |
1-161-005 | Shading Plate Retry Volume | *ENG | [0 to 100 / 60 / 1pulse/step] |
1162 | [Shading Plate Control] | ||
1-162-001 | Shading Position Temp: 12inch: 1 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-002 | Shading Position Temp: 12inch: 2 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-003 | Shading Position Temp: 12inch: 3 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-004 | Shading Position Temp: A3: 1 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-005 | Shading Position Temp: A3: 2 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-006 | Shading Position Temp: A3: 3 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-007 | Shading Position Temp: DLT: 1 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-008 | Shading Position Temp: DLT: 2 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-009 | Shading Position Temp: DLT: 3 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-010 | Shading Position Temp: B4: 1 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-011 | Shading Position Temp: B4: 2 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-012 | Shading Position Temp: B4: 3 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-013 | Shading Position Temp: LT: 1 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-014 | Shading Position Temp: LT: 2 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-015 | Shading Position Temp: LT: 3 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-016 | Shading Position Temp: A4: 1 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-017 | Shading Position Temp: A4: 2 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-018 | Shading Position Temp: A4: 3 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-019 | Shading Position Temp: B5: 1 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-020 | Shading Position Temp: B5: 2 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-021 | Shading Position Temp: B5: 3 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-022 | Shading Position Temp: A5: 1 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-023 | Shading Position Temp: A5: 2 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-024 | Shading Position Temp: A5: 3 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-025 | Shading Position Temp: B6: 1 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-026 | Shading Position Temp: B6: 2 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-027 | Shading Position Temp: B6: 3 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-028 | Shading Position Temp: DLEnv: 1 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-029 | Shading Position Temp: DLEnv: 2 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-030 | Shading Position Temp: DLEnv: 3 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-031 | Shading Position Temp: COM10: 1 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-032 | Shading Position Temp: COM10: 2 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-033 | Shading Position Temp: COM10: 3 | ENG | [0 to 250 / 250 / 1deg/step] |
Engine SP Mode Tables
1-162-034 | Shading Position Temp: Postcard: 1 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-035 | Shading Position Temp: Postcard: 2 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-036 | Shading Position Temp: Postcard: 3 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-037 | Shading Position Temp: 12inch: 4 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-038 | Shading Position Temp: 12inch: 5 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-039 | Shading Position Temp: 12inch: 6 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-040 | Shading Position Temp: 12inch: 7 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-041 | Shading Position Temp: 12inch: 8 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-042 | Shading Position Temp: A3: 4 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-043 | Shading Position Temp: A3: 5 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-044 | Shading Position Temp: A3: 6 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-045 | Shading Position Temp: A3: 7 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-046 | Shading Position Temp: A3: 8 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-047 | Shading Position Temp: DLT: 4 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-048 | Shading Position Temp: DLT: 5 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-049 | Shading Position Temp: DLT: 6 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-050 | Shading Position Temp: DLT: 7 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-051 | Shading Position Temp: DLT: 8 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-052 | Shading Position Temp: B4: 4 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-053 | Shading Position Temp: B4: 5 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-054 | Shading Position Temp: B4: 6 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-055 | Shading Position Temp: B4: 7 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-056 | Shading Position Temp: B4: 8 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-057 | Shading Position Temp: LT: 4 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-058 | Shading Position Temp: LT: 5 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-059 | Shading Position Temp: LT: 6 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-060 | Shading Position Temp: LT: 7 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-061 | Shading Position Temp: LT: 8 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-062 | Shading Position Temp: A4: 4 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-063 | Shading Position Temp: A4: 5 | ENG | [0 to 250 / 250 / 1deg/step] |
Engine SP Mode Tables
1-162-064 | Shading Position Temp: A4: 6 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-065 | Shading Position Temp: A4: 7 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-066 | Shading Position Temp: A4: 8 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-067 | Shading Position Temp: B5: 4 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-068 | Shading Position Temp: B5: 5 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-069 | Shading Position Temp: B5: 6 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-070 | Shading Position Temp: B5: 7 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-071 | Shading Position Temp: B5: 8 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-072 | Shading Position Temp: A5: 4 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-073 | Shading Position Temp: A5: 5 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-074 | Shading Position Temp: A5: 6 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-075 | Shading Position Temp: A5: 7 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-076 | Shading Position Temp: A5: 8 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-077 | Shading Position Temp: B6: 4 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-078 | Shading Position Temp: B6: 5 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-079 | Shading Position Temp: B6: 6 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-080 | Shading Position Temp: B6: 7 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-081 | Shading Position Temp: B6: 8 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-082 | Shading Position Temp: DLEnv: 4 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-083 | Shading Position Temp: DLEnv: 5 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-084 | Shading Position Temp: DLEnv: 6 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-085 | Shading Position Temp: DLEnv: 7 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-086 | Shading Position Temp: DLEnv: 8 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-087 | Shading Position Temp: COM10: 4 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-088 | Shading Position Temp: COM10: 5 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-089 | Shading Position Temp: COM10: 6 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-090 | Shading Position Temp: COM10: 7 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-091 | Shading Position Temp: COM10: 8 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-092 | Shading Position Temp: Postcard: 4 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-093 | Shading Position Temp: Postcard: 5 | ENG | [0 to 250 / 250 / 1deg/step] |
Engine SP Mode Tables
1-162-094 | Shading Position Temp: Postcard: 6 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-095 | Shading Position Temp: Postcard: 7 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-096 | Shading Position Temp: Postcard: 8 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-121 | Shading Position Temp: SRA3: 1 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-122 | Shading Position Temp: SRA3: 2 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-123 | Shading Position Temp: SRA3: 3 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-124 | Shading Position Temp: SRA3: 4 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-125 | Shading Position Temp: SRA3: 5 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-126 | Shading Position Temp: SRA3: 6 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-127 | Shading Position Temp: SRA3: 7 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-128 | Shading Position Temp: SRA3: 8 | ENG | [0 to 250 / 250 / 1deg/step] |
1-162-201 | Shading Position Temp: 12inch: Clear | ENG | [0 to 250 / 0 / 1deg/step] |
1-162-202 | Shading Position Temp: A3: Clear | ENG | [0 to 250 / 0 / 1deg/step] |
1-162-203 | Shading Position Temp: DLT: Clear | ENG | [0 to 250 / 0 / 1deg/step] |
1-162-204 | Shading Position Temp: B4: Clear | ENG | [0 to 250 / 0 / 1deg/step] |
1-162-205 | Shading Position Temp: LT: Clear | ENG | [0 to 250 / 0 / 1deg/step] |
1-162-206 | Shading Position Temp: A4: Clear | ENG | [0 to 250 / 0 / 1deg/step] |
1-162-207 | Shading Position Temp: B5: Clear | ENG | [0 to 250 / 0 / 1deg/step] |
1-162-208 | Shading Position Temp: A5: Clear | ENG | [0 to 250 / 0 / 1deg/step] |
1-162-209 | Shading Position Temp: B6: Clear | ENG | [0 to 250 / 0 / 1deg/step] |
1-162-210 | Shading Position Temp: DLEnv: Clear | ENG | [0 to 250 / 0 / 1deg/step] |
1-162-211 | Shading Position Temp: COM10: Clear | ENG | [0 to 250 / 0 / 1deg/step] |
1-162-212 | Shading Position Temp: Postcard: Clear | ENG | [0 to 250 / 0 / 1deg/step] |
1-162-213 | Shading Position Temp: SRA3: Clear | ENG | [0 to 250 / 0 / 1deg/step] |
Engine SP Mode Tables
1163 | [Shading Plate Control] | ||
1-163-001 | Shading Position Time: 12inch: 1 | ENG | [0 to 10000 / 10000 / 1sec/step] |
1-163-002 | Shading Position Time: 12inch: 2 | ENG | [0 to 10000 / 10000 / 1sec/step] |
1-163-003 | Shading Position Time: 12inch: 3 | ENG | [0 to 10000 / 10000 / 1sec/step] |
1-163-004 | Shading Position Time: A3: 1 | ENG | [0 to 10000 / 10000 / 1sec/step] |
1-163-005 | Shading Position Time: A3: 2 | ENG | [0 to 10000 / 10000 / 1sec/step] |
1-163-006 | Shading Position Time: A3: 3 | ENG | [0 to 10000 / 10000 / 1sec/step] |
1-163-007 | Shading Position Time: DLT: 1 | ENG | [0 to 10000 / 10000 / 1sec/step] |
1-163-008 | Shading Position Time: DLT: 2 | ENG | [0 to 10000 / 10000 / 1sec/step] |
1-163-009 | Shading Position Time: DLT: 3 | ENG | [0 to 10000 / 10000 / 1sec/step] |
1-163-010 | Shading Position Time: B4: 1 | ENG | [0 to 10000 / 10000 / 1sec/step] |
1-163-011 | Shading Position Time: B4: 2 | ENG | [0 to 10000 / 10000 / 1sec/step] |
1-163-012 | Shading Position Time: B4: 3 | ENG | [0 to 10000 / 10000 / 1sec/step] |
1-163-013 | Shading Position Time: LT: 1 | ENG | [0 to 10000 / 10000 / 1sec/step] |
1-163-014 | Shading Position Time: LT: 2 | ENG | [0 to 10000 / 10000 / 1sec/step] |
1-163-015 | Shading Position Time: LT: 3 | ENG | [0 to 10000 / 10000 / 1sec/step] |
1-163-016 | Shading Position Time: A4: 1 | ENG | [0 to 10000 / 10000 / 1sec/step] |
1-163-017 | Shading Position Time: A4: 2 | ENG | [0 to 10000 / 10000 / 1sec/step] |
1-163-018 | Shading Position Time: A4: 3 | ENG | [0 to 10000 / 10000 / 1sec/step] |
1-163-019 | Shading Position Time: B5: 1 | ENG | [0 to 10000 / 10000 / 1sec/step] |
1-163-020 | Shading Position Time: B5: 2 | ENG | [0 to 10000 / 10000 / 1sec/step] |
1-163-021 | Shading Position Time: B5: 3 | ENG | [0 to 10000 / 10000 / 1sec/step] |
1-163-022 | Shading Position Time: A5: 1 | ENG | [0 to 10000 / 10000 / 1sec/step] |
1-163-023 | Shading Position Time: A5: 2 | ENG | [0 to 10000 / 10000 / 1sec/step] |
1-163-024 | Shading Position Time: A5: 3 | ENG | [0 to 10000 / 10000 / 1sec/step] |
1-163-025 | Shading Position Time: B6: 1 | ENG | [0 to 10000 / 10000 / 1sec/step] |
1-163-026 | Shading Position Time: B6: 2 | ENG | [0 to 10000 / 10000 / 1sec/step] |
1-163-027 | Shading Position Time: B6: 3 | ENG | [0 to 10000 / 10000 / 1sec/step] |
1-163-028 | Shading Position Time: DLEnv: 1 | ENG | [0 to 10000 / 10000 / 1sec/step] |
1-163-029 | Shading Position Time: DLEnv: 2 | ENG | [0 to 10000 / 10000 / 1sec/step] |
1-163-030 | Shading Position Time: DLEnv: 3 | ENG | [0 to 10000 / 10000 / 1sec/step] |
1-163-031 | Shading Position Time: COM10: 1 | ENG | [0 to 10000 / 10000 / 1sec/step] |
1-163-032 | Shading Position Time: COM10: 2 | ENG | [0 to 10000 / 10000 / 1sec/step] |
1-163-033 | Shading Position Time: COM10: 3 | ENG | [0 to 10000 / 10000 / 1sec/step] |
1-163-034 | Shading Position Time: Postcard: 1 | ENG | [0 to 10000 / 10000 / 1sec/step] |
1-163-035 | Shading Position Time: Postcard: 2 | ENG | [0 to 10000 / 10000 / 1sec/step] |
Engine SP Mode Tables