Ricoh MP4002/5002 service manual Part 9

• For example: When a copy job stored on the document server is printed in document server mode, the appropriate L: counter (SP8076 0xx) increments.

• Printing a fax report counts as a job and increments the F: counter (SP 8073).

• Interrupted jobs (paper jam, etc.) are counted, even though they do not finish.

• If a job is paused and re-started, it counts as one job.

• If the finisher runs out of staples during a print and staple job, then the job is counted at the time the error occurs.

• For copy jobs (SP 8072) and scan jobs (SP 8075), the total is calculated by multiplying the number of sets of copies by the number of pages scanned. (One duplex page counts as 2.)

• The first test print and subsequent test prints to adjust settings are added to the number of pages of the copy job (SP 8072).

  Service Tables

• When printing the first page of a job from within the document server screen, the page is counted.

  
  

  8111	T:FAX TX Jobs	[0 to 9999999 / 0 / 1]
  	These SPs count the total number of jobs (color or black-and-white) sent by fax, either directly or using a file stored on the document server, on a telephone line. Note: Color fax sending is not available at this time.
  001	B/W	Black TX
  8113	F:FAX TX Jobs	[0 to 9999999 / 0 / 1]
  	These SPs count the total number of jobs (color or black-and-white) sent by fax directly on a telephone line. Note: Color fax sending is not available at this time.
  001	B/W	Black TX

• These counters count jobs, not pages.

• This SP counts fax jobs sent over a telephone line with a fax application, including documents stored on the document server.

• If the mode is changed during the job, the job will count with the mode set when the job started.

• If the same document is faxed to both a public fax line and an I-Fax at a destination where both are available, then this counter increments, and the I-Fax counter (812x) also increments.

• The fax job is counted when the job is scanned for sending, not when the job is sent.

  
  

  8121	T:IFAX TX Jobs	[0 to 9999999 / 0 / 1]
  	These SPs count the total number of jobs (color or black-and-white) sent, either directly or using a file stored on the document server, as fax images using I-Fax. Note: Color fax sending is not available at this time.
  001	B/W	Black TX
  8123	F:IFAX TX Jobs	[0 to 9999999 / 0 / 1]
  	These SPs count the number of jobs (color or black-and-white) sent (not stored on the document server), as fax images using I-Fax. Note: Color fax sending is not available at this time.
  001	B/W	Black TX

  
  

• These counters count jobs, not pages.

• The counters for color are provided for future use; the color fax feature is not available at this time.

• The fax job is counted when the job is scanned for sending, not when the job is sent.

  
  

  8131	T:S-to-Email Jobs	[0 to 9999999 / 0 / 1]
  	These SPs count the total number of jobs scanned and attached to an e-mail, regardless of whether the document server was used or not.
  001	B/W	Black TX
  002	Color	Color TX
  003	ACS	Color TX
  8135	S:S-to-Email Jobs
  	These SPs count the number of jobs scanned and attached to an e-mail, without storing the original on the document server.
  001	B/W	Black TX
  002	Color	Color TX
  003	ACS	Color TX

  
  

  Service Tables

• These counters count jobs, not pages.

• If the job is stored on the document server, after the job is stored it is determined to be color or black-and-white then counted.

• If the job is cancelled during scanning, or if the job is cancelled while the document is waiting to be sent, the job is not counted.

• If the job is cancelled during sending, it may or may not be counted, depending on what stage of the process had been reached when the job was cancelled.

• If several jobs are combined for sending to the Scan Router, Scan-to-Email, or Scan-to-PC, or if one job is sent to more than one destination. each send is counted separately. For example, if the same document is sent by Scan-to-Email as well as Scan-to-PC, then it is counted twice (once for Scan-to-Email and once for Scan-to-PC).

  
  

  8141	T:Deliv Jobs/Svr	[0 to 9999999 / 0 / 1]
  	These SPs count the total number of jobs scanned and sent to a Scan Router server.
  001	B/W	Black Deliv
  002	Color	Color Deliv
  003	ACS	Color Deliv
  8145	S:Deliv Jobs/Svr
  	These SPs count the number of jobs scanned and sent to a Scan Router server.
  001	B/W	Black Deliv
  002	Color	Color Deliv
  003	ACS	Color Deliv

  
  

• These counters count jobs, not pages.

• The jobs are counted even though the arrival and reception of the jobs at the Scan Router server cannot be confirmed.

• If even one color image is mixed with black-and-white images, then the job is counted as a "Color" job.

• If the job is cancelled during scanning, or if the job is cancelled while the document is waiting to be delivered, the job is not counted.

• If the job is cancelled during sending, it may or may not be counted, depending on what stage of the process had been reached when the job was cancelled.

• Even if several files are combined for sending, the transmission counts as one job.

  
  

  8151	T:Deliv Jobs/PC	[0 to 9999999 / 0 / 1]
  	These SPs count the total number of jobs scanned and sent to a folder on a PC (Scan-to-PC). Note: At the present time, 8151 and 8155 perform identical counts.
  001	B/W	Black Deliv
  002	Color	Color Deliv
  003	ACS	Color Deliv
  8155	S:Deliv Jobs/PC
  	These SPs count the total number of jobs scanned and sent with Scan-to-PC.
  001	B/W	Black Deliv
  002	Color	Color Deliv
  003	ACS	Color Deliv

  
  

  Service Tables

• These counters count jobs, not pages.

• If the job is cancelled during scanning, it is not counted.

• If the job is cancelled while it is waiting to be sent, the job is not counted.

• If the job is cancelled during sending, it may or may not be counted, depending on what stage of the process had been reached when the job was cancelled.

• Even if several files are combined for sending, the transmission counts as one job.

  
  

  8161	T:PCFAX TX Jobs	These SPs count the number of PC Fax transmission jobs. A job is counted from when it is registered for sending, not when it is sent. [0 to 9999999 / 0 / 1] Note: At the present time, these counters perform identical counts.
  8163	F:PCFAX TX Jobs

  
  

• This counts fax jobs started from a PC using a PC fax application, and sending the data out to the destination from the PC through the copier.

  
  

  8171	T:Deliv Jobs/WSD	These SPs count the pages scanned by WSD. [0 to 9999999 / 0 / 1]
  8175	S:Deliv Jobs/WSD
  001	B/W	Black Deliv
  002	Color	Color Deliv
  003	ACS	Color Deliv

  
  

  
  

  8181	T:Scan to Media Jobs	These SPs count the pages scanned to media by the scanner application. [0 to 9999999 / 0 / 1]
  8185	S:Scan to Media Jobs
  001	B/W	Black Deliv
  002	Color	Color Deliv
  003	ACS	Color Deliv

  
  

  8191	T:Total Scan PGS	These SPs count the pages scanned by each application that uses the scanner to scan images. [0 to 9999999 / 0 / 1]
  8192	C:Total Scan PGS
  8193	F:Total Scan PGS
  8195	S:Total Scan PGS
  8196	L:Total Scan PGS

  
  

• SP 8191 to 8196 count the number of scanned sides of pages, not the number of physical pages.

• These counters do not count reading user stamp data, or reading color charts to adjust color.

• Previews done with a scanner driver are not counted.

• A count is done only after all images of a job have been scanned.

• Scans made in SP mode are not counted.

  Examples

• If 3 B5 pages and 1 A3 page are scanned with the scanner application but not stored, the S: count is 4.

  Service Tables

• If both sides of 3 A4 sheets are copied and stored to the document server using the Store File button in the Copy mode window, the C: count is 6 and the L: count is 6.

• If both sides of 3 A4 sheets are copied but not stored, the C: count is 6.

• If you enter document server mode then scan 6 pages, the L: count is 6.

  
  

  8201	T:LSize Scan PGS	[0 to 9999999 / 0 / 1]
  8203	F Lsize Scan PGS	[0 to 9999999 / 0 / 1]
  8205	S:LSize Scan PGS	[0 to 9999999 / 0 / 1]
  	These SP codes count the total number of large pages input with the scanner for scan jobs only. Large size paper (A3/DLT) scanned for fax transmission are not counted. Note: These counters are displayed in the SMC Report, and in the User Tools display..

  
  

  8211	T:Scan PGS/LS	These SPs count the number of pages scanned into the document server . [0 to 9999999 / 0 / 1] The L: counter counts the number of pages stored from within the document server mode screen at the operation panel, and with the Store File button from within the Copy mode screen
  8212	C:Scan PGS/LS
  8213	F:Scan PGS/LS
  8215	S:Scan PGS/LS
  8216	L:Scan PGS/LS

  
  

• Reading user stamp data is not counted.

• If a job is cancelled, the pages output as far as the cancellation are counted.

• If the scanner application scans and stores 3 B5 sheets and 1 A4 sheet, the S: count is 4.

• If pages are copied but not stored on the document server, these counters do not change.

• If both sides of 3 A4 sheets are copied and stored to the document server, the C: count is 6 and the L: count is 6.

• If you enter document server mode then scan 6 pages, the L: count is 6.

  
  

  8221	ADF Org Feeds	[0 to 9999999 / 0 / 1]
  	These SPs count the number of pages fed through the ADF for front and back side scanning.
  001	Front	Number of front sides fed for scanning: With an ADF that can scan both sides simultaneously, the Front side count is the same as the number of pages fed for either simplex or duplex scanning. With an ADF that cannot scan both sides simultaneously, the Front side count is the same as the number of pages fed for duplex front side scanning. (The front side is determined by which side the user loads face up.)
  002	Back	Number of rear sides fed for scanning: With an ADF that can scan both sides simultaneously, the Back count is the same as the number of pages fed for duplex scanning. With an ADF that cannot scan both sides simultaneously, the Back count is the same as the number of pages fed for duplex rear-side scanning.

• When 1 sheet is fed for duplex scanning the Front count is 1 and the Back count is 1.

• If a jam occurs during the job, recovery processing is not counted to avoid double counting. Also, the pages are not counted if the jam occurs before the first sheet is output.

  
  

  8231	Scan PGS/Mode	[0 to 9999999 / 0 / 1]
  	These SPs count the number of pages scanned by each ADF mode to determine the work load on the ADF.
  001	Large Volume	Selectable. Large copy jobs that cannot be loaded in the ADF at one time.
  002	SADF	Selectable. Feeding pages one by one through the ADF.
  003	Mixed Size	Selectable. Select "Mixed Sizes" on the operation panel.
  004	Custom Size	Selectable. Originals of non-standard size.
  005	Platen	Book mode. Raising the ADF and placing the original directly on the platen.
  006	Mixed 1side/2side	Selectable. Select "Simplex/Duplex" on the operation panel.

  
  

  Service Tables

• If the scan mode is changed during the job, for example, if the user switches from ADF to Platen mode, the count is done for the last selected mode.

• The user cannot select mixed sizes or non-standard sizes with the fax application so if the original's page sizes are mixed or non-standard, these are not counted.

• If the user selects "Mixed Sizes" for copying in the platen mode, the Mixed Size count is enabled.

• In the SADF mode if the user copies 1 page in platen mode and then copies 2 pages with SADF, the Platen count is 1 and the SADF count is 3.

  
  

  8241	T:Scan PGS/Org	[0 to 9999999 / 0 / 1]
  	These SPs count the total number of scanned pages by original type for all jobs, regardless of which application was used.
  8242	C:Scan PGS/Org	[0 to 9999999 / 0 / 1]

  	These SPs count the number of pages scanned by original type for Copy jobs.
  8243	F:Scan PGS/Org	[0 to 9999999 / 0 / 1]
  	These SPs count the number of pages scanned by original type for Fax jobs.
  8245	S:Scan PGS/Org	[0 to 9999999 / 0 / 1]
  	These SPs count the number of pages scanned by original type for Scan jobs.
  8246	L:Scan PGS/Org	[0 to 9999999 / 0 / 1]
  	These SPs count the number of pages scanned and stored from within the document server mode screen at the operation panel, and with the Store File button from within the Copy mode screen
  	8241	8242	8243	8245	8246
  824x 1: Text	Yes	Yes	Yes	Yes	Yes
  824x 2: Text/Photo	Yes	Yes	Yes	Yes	Yes
  824x 3: Photo	Yes	Yes	Yes	Yes	Yes
  824x 4: GenCopy, Pale	Yes	Yes	No	Yes	Yes
  824x 5: Map	Yes	Yes	No	No	Yes
  824x 6: Normal/Detail	Yes	No	Yes	No	No
  824x 7: Fine/Super Fine	Yes	No	Yes	No	No
  824x 8: Binary	Yes	No	No	Yes	No
  824x 9: Grayscale	Yes	No	No	Yes	No
  824x 10: Color	Yes	No	No	Yes	No
  824x 11: Other	Yes	Yes	Yes	Yes	Yes

  
  

• If the scan mode is changed during the job, for example, if the user switches from ADF to Platen mode, the count is done for the last selected mode.

  8251	T:Scan PGS/ImgEdt	These SPs show how many times Image Edit
  		features have been selected at the operation panel
  8252	C:Scan PGS/ImgEdt
  		for each application. Some examples of these
  8255	S:Scan PGS/ImgEdt	editing features are:
  		Erase> Border
  8256	L:Scan PGS/ImgEdt
  		Erase> Center
  8257	O:Scan PGS/ImgEdt	Image Repeat
  		Centering
  		Positive/Negative
  		[0 to 9999999 / 0 / 1]
  		Note: The count totals the number of times the edit
  		features have been used. A detailed breakdown of
  		exactly which features have been used is not given.

  
  

  Service Tables

  The L: counter counts the number of pages stored from within the document server mode screen at the operation panel, and with the Store File button from within the Copy mode screen.

  
  

  8281	T:Scan PGS/TWAIN	These SPs count the number of pages scanned using a TWAIN driver. These counters reveal how the TWAIN driver is used for delivery functions. [0 to 9999999 / 0 / 1] Note: At the present time, these counters perform identical counts.
  8285	S:Scan PGS/TWAIN

  
  

  
  

  8291	T:Scan PGS/Stamp	These SPs count the number of pages stamped with the stamp in the ADF unit. [0 to 9999999 / 0 / 1] The L: counter counts the number of pages stored from within the document server mode screen at the operation panel, and with the Store File button from within the Copy mode screen
  8293	F:Scan PGS/Stamp
  8295	S:Scan PGS/Stamp

  
  

  8301	T:Scan PGS/Size	[0 to 9999999 / 0 / 1]
  	These SPs count by size the total number of pages scanned by all applications. Use these totals to compare original page size (scanning) and output (printing) page size [SP 8-441].
  8302	C:Scan PGS/Size	[0 to 9999999 / 0 / 1]
  	These SPs count by size the total number of pages scanned by the Copy application. Use these totals to compare original page size (scanning) and output (printing) page size [SP 8-442].
  8303	F:Scan PGS/Size	[0 to 9999999 / 0 / 1]
  	These SPs count by size the total number of pages scanned by the Fax application. Use these totals to compare original page size (scanning) and output page size [SP 8-443].
  8305	S:Scan PGS/Size	[0 to 9999999 / 0 / 1]
  	These SPs count by size the total number of pages scanned by the Scan application. Use these totals to compare original page size (scanning) and output page size [SP 8-445].
  8306	L:Scan PGS/Size	[0 to 9999999 / 0 / 1]
  	These SPs count by size the total number of pages scanned and stored from within the document server mode screen at the operation panel, and with the Store File button from within the Copy mode screen. Use these totals to compare original page size (scanning) and output page size [SP 8-446].
  830x 1	A3
  830x 2	A4
  830x 3	A5
  830x 4	B4
  830x 5	B5
  830x 6	DLT

  830x 7	LG
  830x 8	LT
  830x 9	HLT
  830x 10	Full Bleed
  830x 254	Other (Standard)
  830x 255	Other (Custom)

  
  

  
  

  8311	T:Scan PGS/Rez	[0 to 9999999 / 0 / 1]
  	These SPs count by resolution setting the total number of pages scanned by applications that can specify resolution settings.
  8315	S:Scan PGS/Rez	[0 to 9999999 / 0 / 1]
  	These SPs count by resolution setting the total number of pages scanned by applications that can specify resolution settings. Note: At the present time, 8311 and 8315 perform identical counts.
  831x 1	1200dpi to
  831x 2	600dpito1199dpi
  831x 3	400dpito599dpi
  831x 4	200dpito399dpi
  831x 5	to199dpi

  
  

  Service Tables

• Copy resolution settings are fixed so they are not counted.

• The Fax application does not allow finely-adjusted resolution settings so no count is done for the Fax application.

  
  

  8381	T:Total PrtPGS	These SPs count the number of pages printed by the customer. The counter for the application used for storing the pages increments. [0 to 9999999 / 0 / 1] The L: counter counts the number of pages stored from within the document server mode screen at the operation panel. Pages stored with the Store File button from within the Copy mode screen go to the C: counter.
  8382	C:Total PrtPGS
  8383	F:Total PrtPGS
  8384	P:Total PrtPGS
  8385	S:Total PrtPGS
  8386	L:Total PrtPGS
  8387	O:Total PrtPGS

  
  

• When the A3/DLT double count function is switched on with SP5104, 1 A3/DLT page is counted as 2.

• When several documents are merged for a print job, the number of pages stored are counted for the application that stored them.

• These counters are used primarily to calculate charges on use of the machine, so the following pages are not counted as printed pages:

  Blank pages in a duplex printing job.

  Blank pages inserted as document covers, chapter title sheets, and slip sheets. Reports printed to confirm counts.

  All reports done in the service mode (service summaries, engine maintenance reports, etc.) Test prints for machine image adjustment.

  Error notification reports.

  Partially printed pages as the result of a copier jam.

  
  

  8391	LSize PrtPGS	[0 to 9999999 / 0 / 1]
  	These SPs count pages printed on paper sizes A3/DLT and larger. Note: In addition to being displayed in the SMC Report, these counters are also displayed in the User Tools display on the copy machine.

  
  

  8401	T:PrtPGS/LS	These SPs count the number of pages printed from the document server. The counter for the application used to print the pages is incremented. The L: counter counts the number of jobs stored from within the document server mode screen at the operation panel. [0 to 9999999 / 0 / 1]
  8402	C:PrtPGS/LS
  8403	F:PrtPGS/LS
  8404	P:PrtPGS/LS
  8405	S:PrtPGS/LS
  8406	L:PrtPGS/LS

  
  

• Print jobs done with Web Image Monitor and Desk Top Binder are added to the L: count.

  Service Tables

• Fax jobs done with Web Image Monitor and Desk Top Binder are added to the F: count.

  
  

  8411

  Prints/Duplex

  This SP counts the amount of paper (front/back counted as 1 page) used for duplex printing. Last pages printed only on one side are not counted. [0 to 9999999 / 0 / 1]

  
  

  
  

  8421	T:PrtPGS/Dup Comb	[0 to 9999999 / 0 / 1]
  	These SPs count by binding and combine, and n-Up settings the number of pages processed for printing. This is the total for all applications.
  8422	C:PrtPGS/Dup Comb	[0 to 9999999 / 0 / 1]
  	These SPs count by binding and combine, and n-Up settings the number of pages processed for printing by the copier application.
  8423	F:PrtPGS/Dup Comb	[0 to 9999999 / 0 / 1]
  	These SPs count by binding and combine, and n-Up settings the number of pages processed for printing by the fax application.
  8424	P:PrtPGS/Dup Comb	[0 to 9999999 / 0 / 1]
  	These SPs count by binding and combine, and n-Up settings the number of pages processed for printing by the printer application.
  8425	S:PrtPGS/Dup Comb	[0 to 9999999 / 0 / 1]

  	These SPs count by binding and combine, and n-Up settings the number of pages processed for printing by the scanner application.
  8426	L:PrtPGS/Dup Comb	[0 to 9999999 / 0 / 1]
  	These SPs count by binding and combine, and n-Up settings the number of pages processed for printing from within the document server mode window at the operation panel.
  8427	O:PrtPGS/Dup Comb	[0 to 9999999 / 0 / 1]
  	These SPs count by binding and combine, and n-Up settings the number of pages processed for printing by Other applications
  842x 1	Simplex> Duplex
  842x 2	Duplex> Duplex
  842x 3	Book> Duplex
  842x 4	Simplex Combine
  842x 5	Duplex Combine
  842x 6	2in1	2 pages on 1 side (2-Up)
  842x 7	4in1	4 pages on 1 side (4-Up)
  842x 8	6in1	6 pages on 1 side (6-Up)
  842x 9	8in1	8pages on 1 side (8-Up)
  842x 10	9in1	9 pages on 1 side (9-Up)
  842x 11	16in1	16 pages on 1 side (16-Up)
  842x 12	Booklet
  842x 13	Magazine
  842x 14	2in1 + Booklet
  842x 15	4in1 + Booklet
  842x 16	6in1 + Booklet
  842x 17	8in1 + Booklet

  842x 18	9in1 + Booklet
  842x 19	2in1 + Magazine
  842x 20	4in1 + Magazine
  842x 21	6in1 + Magazine
  842x 22	8in1 + Magazine
  842x 23	9in1 + Magazine
  842x 24	16in1 + Magazine

  
  

• These counts (SP8421 to SP8427) are especially useful for customers who need to improve their compliance with ISO standards for the reduction of paper consumption.

• Pages that are only partially printed with the n-Up functions are counted as 1 page.

  Service Tables

• Here is a summary of how the counters work for Booklet and Magazine modes:

  
  

  Booklet		Magazine
  Original Pages	Count	Original Pages	Count
  1	1	1	1
  2	2	2	2
  3	2	3	2
  4	2	4	2
  5	3	5	4
  6	4	6	4
  7	4	7	4
  8	4	8	4

  
  

  8431	T:PrtPGS/ImgEdt	[0 to 9999999 / 0 / 1]
  	These SPs count the total number of pages output with the three features below, regardless of which application was used.
  8432	C:PrtPGS/ImgEdt	[0 to 9999999 / 0 / 1]
  	These SPs count the total number of pages output with the three features below with the copy application.
  8434	P:PrtPGS/ImgEdt	[0 to 9999999 / 0 / 1]
  	These SPs count the total number of pages output with the three features below with the print application.
  8436	L:PrtPGS/ImgEdt	[0 to 9999999 / 0 / 1]
  	These SPs count the total number of pages output from within the document server mode window at the operation panel with the three features below.
  8437	O:PrtPGS/ImgEdt	[0 to 9999999 / 0 / 1]
  	These SPs count the total number of pages output with the three features below with Other applications.
  843x 1	Cover/Slip Sheet	Total number of covers or slip sheets inserted. The count for a cover printed on both sides counts 2.
  843x 2	Series/Book	The number of pages printed in series (one side) or printed as a book with booklet right/left pagination.
  843x 3	User Stamp	The number of pages printed where stamps were applied, including page numbering and date stamping.

  
  

  
  

  8441	T:PrtPGS/Ppr Size	[0 to 9999999 / 0 / 1]
  	These SPs count by print paper size the number of pages printed by all applications.
  8442	C:PrtPGS/Ppr Size	[0 to 9999999 / 0 / 1]

  	These SPs count by print paper size the number of pages printed by the copy application.
  8443	F:PrtPGS/Ppr Size	[0 to 9999999 / 0 / 1]
  	These SPs count by print paper size the number of pages printed by the fax application.
  8444	P:PrtPGS/Ppr Size	[0 to 9999999 / 0 / 1]
  	These SPs count by print paper size the number of pages printed by the printer application.
  8445	S:PrtPGS/Ppr Size	[0 to 9999999 / 0 / 1]
  	These SPs count by print paper size the number of pages printed by the scanner application.
  8446	L:PrtPGS/Ppr Size	[0 to 9999999 / 0 / 1]
  	These SPs count by print paper size the number of pages printed from within the document server mode window at the operation panel.
  8447	O:PrtPGS/Ppr Size	[0 to 9999999 / 0 / 1]
  	These SPs count by print paper size the number of pages printed by Other applications.
  844x 1	A3
  844x 2	A4
  844x 3	A5
  844x 4	B4
  844x 5	B5
  844x 6	DLT
  844x 7	LG
  844x 8	LT
  844x 9	HLT
  844x 10	Full Bleed

  Service Tables

  844x 254	Other (Standard)
  844x 255	Other (Custom)

  
  

• These counters do not distinguish between LEF and SEF.

  
  

  8451	PrtPGS/Ppr Tray	[0 to 9999999 / 0 / 1]
  	These SPs count the number of sheets fed from each paper feed station.
  001	Bypass Tray	Bypass Tray
  002	Tray 1	Copier
  003	Tray 2	Copier
  004	Tray 3	Paper Tray Unit (Option)
  005	Tray 4	Paper Tray Unit (Option)
  006	Tray 5	LCT (Option)
  007	Tray 6	Currently not used.
  008	Tray 7	Currently not used.
  009	Tray 8	Currently not used.
  010	Tray 9	Currently not used.
  011	Tray 10	Currently not used.
  012	Tray 11	Currently not used.
  013	Tray 12	Currently not used.
  014	Tray 13	Currently not used.
  015	Tray 14	Currently not used.
  016	Tray 15	Currently not used.

  Service Tables

  
  

  8461	T:PrtPGS/Ppr Type	[0 to 9999999 / 0 / 1]
  	These SPs count by paper type the number pages printed by all applications. These counters are not the same as the PM counter. The PM counter is based on feed timing to accurately measure the service life of the feed rollers. However, these counts are based on output timing. Blank sheets (covers, chapter covers, slip sheets) are also counted. During duplex printing, pages printed on both sides count as 1, and a page printed on one side counts as 1.
  8462	C:PrtPGS/Ppr Type	[0 to 9999999 / 0 / 1]
  	These SPs count by paper type the number pages printed by the copy application.
  8463	F:PrtPGS/Ppr Type	[0 to 9999999 / 0 / 1]
  	These SPs count by paper type the number pages printed by the fax application.
  8464	P:PrtPGS/Ppr Type	[0 to 9999999 / 0 / 1]
  	These SPs count by paper type the number pages printed by the printer application.
  8466	L:PrtPGS/Ppr Type	[0 to 9999999 / 0 / 1]
  	These SPs count by paper type the number pages printed from within the document server mode window at the operation panel.
  846x 1	Normal
  846x 2	Recycled
  846x 3	Special
  846x 4	Thick
  846x 5	Normal (Back)
  846x 6	Thick (Back)
  846x 7	OHP

  846x 8

  Other

  
  

  
  

  8471	PrtPGS/Mag	[0 to 9999999 / 0 / 1]
  	These SPs count by magnification rate the number of pages printed.
  001	to 49%
  002	50% to 99%
  003	100%
  004	101% to 200%
  005	201% to

  
  

• Counts are done for magnification adjusted for pages, not only on the operation panel but performed remotely with an external network application capable of performing magnification adjustment as well.

• Magnification adjustments done with printer drivers with PC applications such as Excel are also counted.

• Magnification adjustments done for adjustments after they have been stored on the document server are not counted.

• Magnification adjustments performed automatically during Auto Reduce/Enlarge copying are counted.

• The magnification rates of blank cover sheets, slip sheets, etc. are automatically assigned a rate of 100%.

  
  

  8481	T:PrtPGS/TonSave
  8484	P:PrtPGS/TonSave
  	These SPs count the number of pages printed with the Toner Save feature switched on. Note: These SPs return the same results as this SP is limited to the Print application. [0 to 9999999 / 0 / 1]

  
  

  8511	T:PrtPGS/Emul	[0 to 9999999 / 0 / 1]
  	These SPs count by printer emulation mode the total number of pages printed.
  8514	P:PrtPGS/Emul	[0 to 9999999 / 0 / 1]
  	These SPs count by printer emulation mode the total number of pages printed.
  001	RPCS
  002	RPDL
  003	PS3
  004	R98
  005	R16
  006	GL/GL2
  007	R55
  008	RTIFF
  009	PDF
  010	PCL5e/5c
  011	PCL XL
  012	IPDL-C
  013	BM-Links	Japan Only
  014	Other
  015	IPDS

  
  

  Service Tables

• SP8511 and SP8514 return the same results as they are both limited to the Print application.

• Print jobs output to the document server are not counted.

  
  

  8521	T:PrtPGS/FIN	[0 to 9999999 / 0 / 1]
  	These SPs count by finishing mode the total number of pages printed by all applications.
  8522	C:PrtPGS/FIN	[0 to 9999999 / 0 / 1]
  	These SPs count by finishing mode the total number of pages printed by the Copy application.
  8523	F:PrtPGS/FIN	[0 to 9999999 / 0 / 1]
  	These SPs count by finishing mode the total number of pages printed by the Fax application. Note: Print finishing options for received faxes are currently not available.
  8524	P:PrtPGS/FIN	[0 to 9999999 / 0 / 1]
  	These SPs count by finishing mode the total number of pages printed by the Print application.
  8525	S:PrtPGS/FIN	[0 to 9999999 / 0 / 1]
  	These SPs count by finishing mode the total number of pages printed by the Scanner application.
  8526	L:PrtPGS/FIN	[0 to 9999999 / 0 / 1]
  	These SPs count by finishing mode the total number of pages printed from within the document server mode window at the operation panel.
  852x 1	Sort
  852x 2	Stack
  852x 3	Staple
  852x 4	Booklet
  852x 5	Z-Fold
  852x 6	Punch
  852x 7	Other

  852x 8	Inside-Fold
  852x 9	Three-IN-Fold
  852x 10	Three-OUT-Fold
  852x 11	Four-Fold
  852x 12	KANNON-Fold
  852x 13	Perfect-Bind
  852x 14	Ring-Bind

  
  

  

  • If stapling is selected for finishing and the stack is too large for stapling, the unstapled pages are still counted.

    Service Tables

  • The counts for staple finishing are based on output to the staple tray, so jam recoveries are counted.

    
    

    8531

    Staples

    This SP counts the amount of staples used by the machine. [0 to 9999999 / 0 / 1]

    
    

    
    

    8551	T:PrtBooks/FIN
    8552	C:PrtBooks/FIN
    8554	P:PrtBooks/FIN
    8556	L:PrtBooks/FIN
    001	Perfect-Bind	Not Used
    002	Ring-Bind	Not Used

    
    

    
    

    8561	T:A Sheet Of Paper	[0 to 9999999 / 0 / 1]
    8562	C:A Sheet Of Paper	[0 to 9999999 / 0 / 1]
    8563	F:A Sheet Of Paper	[0 to 9999999 / 0 / 1]
    8564	P:A Sheet Of Paper	[0 to 9999999 / 0 / 1]

    8566	L:A Sheet Of Paper	[0 to 9999999 / 0 / 1]
    8567	O:A Sheet Of Paper	[0 to 9999999 / 0 / 1]
    	These SPs count the totals number of duplex pages printed.
    001	Total: Over A3/DLT
    002	Total: Under A3/DLT
    003	Duplex: Over A3/DLT
    004	Duplex: Under A3/DLT

    
    

    
    

    8581	T: Counter	[0 to 9999999 / 0 / 1]
    	These SPs count the total output broken down by color output, regardless of the application used. In addition to being displayed in the SMC Report, these counters are also displayed in the User Tools display on the copy machine. Note: This SP is expanded for color MFP and color LP machines. For this machine, the count is done for black only.

    
    

    
    

    8591	O: Counter	[0 to 9999999 / 0 / 1]
    	These SPs count the totals for A3/DLT paper use, number of duplex pages printed, and the number of staples used. These totals are for Other (O:) applications only.
    001	A3/DLT
    002	Duplex

    Service Tables

    
    

    8601	T:Coverage Counter
    	These SPs count the total coverage for each color and printout pages.
    001	B/W	[0 to 2147483647 / 0 / 1]
    011	B/W Printing Pages	[0 to 9999999 / 0 / 1]
    8602	C:Coverage Counter	[0 to 2147483647 / 0 / 1]
    	These SPs count the total coverage for B/W.
    8603	F:Coverage Counter	[0 to 2147483647 / 0 / 1]
    	These SPs count the total coverage for B/W.
    8604	P:Coverage Counter	[0 to 2147483647 / 0 / 1]
    	These SPs count the total coverage for B/W.
    8606	L:Coverage Counter	[0 to 2147483647 / 0 / 1]
    	These SPs count the total coverage for B/W.

    
    

    
    

    8617	SDK Apli Counter	[0 to 9999999 / 0 / 1]
    	These SPs count the total printout pages for each SDK applicaion.
    001	SDK-1
    002	SDK-2
    003	SDK-3
    004	SDK-4
    005	SDK-5
    006	SDK-6

    
    

    8631	T:FAX TX PGS	[0 to 9999999 / 0 / 1]
    	These SPs count by color mode the number of pages sent by fax to a telephone number.
    001	B/W	Black TX
    8633	F:FAX TX PGS	[0 to 999999 / 0 / 1]
    	These SPs count by color mode the number of pages sent by fax to a telephone number.
    001	B/W	Black TX

    
    

• If a document has color and black-and-white pages mixed, the pages are counted separately as B/W or Color.

• At the present time, this feature is provided for the Fax application only so SP8631 and SP8633 are the same.

• The counts include error pages.

• If a document is sent to more than one destination with a Group transmission, the count is done for each destination.

• Polling transmissions are counted but polling RX are not.

• Relay, memory, and confidential mailbox transmissions and are counted for each destination.

  
  

  8641	T:FAX TX PGS	[0 to 9999999 / 0 / 1]
  	These SPs count by color mode the number of pages sent by fax to as fax images using I-Fax.
  001	B/W	Black TX
  8643	F:FAX TX PGS	[0 o 9999999 / 0 / 1]
  	These SPs count by color mode the number of pages sent by Fax as fax images using I-Fax.
  001	B/W	Black TX

  
  

• If a document has color and black-and-white pages mixed, the pages are counted separately as B/W or Color.

• At the present time, this feature is provided for the Fax application only so SP8641 and SP8643 are the same.

• The counts include error pages.

  Service Tables

• If a document is sent to more than one destination with a Group transmission, the count is done for each destination.

• Polling transmissions are counted but polling RX are not.

• Relay, memory, and confidential mailbox transmissions and are counted for each destination.

  
  

  8651	T:S-to-Email PGS	[0 to 9999999 / 0 / 1]
  	These SPs count by color mode the total number of pages attached to an e-mail for both the Scan and document server applications.
  001	B/W
  002	Color
  8655	S:S-to-Email PGS	[0 to 9999999 / 0 / 1]
  	These SPs count by color mode the total number of pages attached to an e-mail for the Scan application only.
  001	B/W
  002	Color

  
  

  

  • The count for B/W and Color pages is done after the document is stored on the HDD. If the job is cancelled before it is stored, the pages are not counted.

  • If Scan-to-Email is used to send a 10-page document to 5 addresses, the count is 10 (the pages are sent to the same SMTP server together).

  • If Scan-to-PC is used to send a 10-page document to 5 folders, the count is 50 (the document is sent to each destination of the SMB/FTP server).

  • Due to restrictions on some devices, if Scan-to-Email is used to send a 10-page document to a large number of destinations, the count may be divided and counted separately. For example, if a 10-page document is sent to 200 addresses, the count is 10 for the first 100 destinations and the count is also 10 for the second 100 destinations, for a total of 20).

    
    

    8661	T:Deliv PGS/Svr	[0 to 9999999 / 0 / 1]
    	These SPs count by color mode the total number of pages sent to a Scan Router server by both Scan and LS applications.
    001	B/W
    002	Color
    8665	S:Deliv PGS/Svr	[0 to 9999999 / 0 / 1]
    	These SPs count by color mode the total number of pages sent to a Scan Router server by the Scan application.
    001	B/W
    002	Color

    
    

    

  • The B/W and Color counts are done after the document is stored on the HDD of the Scan Router server.

    Service Tables

  • If the job is canceled before storage on the Scan Router server finishes, the counts are not done.

  • The count is executed even if regardless of confirmation of the arrival at the Scan Router server.

    
    

    8671	T: Deliv PGS/PC	[0 to 9999999 / 0 / 1]
    	These SPs count by color mode the total number of pages sent to a folder on a PC (Scan-to-PC) with the Scan and LS applications.
    001	B/W
    002	Color
    8675	S: Deliv PGS/PC	[0 to 9999999 / 0 / 1]
    	These SPs count by color mode the total number of pages sent with Scan-to-PC with the Scan application.
    001	B/W
    002	Color

    
    

    8681	T:PCFAX TXPGS	These SPs count the number of pages sent by PC Fax. These SPs are provided for the Fax application only, so the counts for SP8681 and SP8683 are the same. [0 to 9999999 / 0 / 1]
    8683	F:PCFAX TXPGS

    
    

• This counts pages sent from a PC using a PC fax application, from the PC through the copier to the destination.

• When sending the same message to more than one place using broadcasting, the pages are only counted once. (For example, a 10-page fax is sent to location A and location B. The counter goes up by 10, not 20.)

  
  

  8691	T:TX PGS/LS	These SPs count the number of pages sent from the document server. The counter for the application that was used to store the pages is incremented. [0 to 9999999 / 0 / 1] The L: counter counts the number of pages stored from within the document server mode screen at the operation panel. Pages stored with the Store File button from within the Copy mode screen go to the C: counter.
  8692	C:TX PGS/LS
  8693	F:TX PGS/LS
  8694	P:TX PGS/LS
  8695	S:TX PGS/LS
  8696	L:TX PGS/LS

  
  

  

  • Print jobs done with Web Image Monitor and Desk Top Binder are added to the count.

  • If several documents are merged for sending, the number of pages stored are counted for the application that stored them.

  • When several documents are sent by a Fax broadcast, the F: count is done for the number of pages sent to each destination.

Service Tables

Service Tables

Service Tables

Service Tables

1. MAIN SP TABLES-9

   
   

   1. INPUT CHECK TABLE

      When entering the Input Check mode, 8 digits display the result for a section. Each digit corresponds to a different device as shown in the table.

      
      

      Bit No.	7	6	5	4	3	2	1	0
      Result	0 or 1	0 or 1	0 or 1	0 or 1	0 or 1	0 or 1	0 or 1	0 or 1

      
      

      Service Tables

      Copier

      
      

      5803	Input Check
      	Description	Reading
      		0	1
      001	Tray 1: Paper Size Sensor	See the table 1 following this table.
      002	Tray 1: Tray Set Sensor	Set	Not set
      003	Tray 1: Paper Lift Sensor	Not upper limit	Upper limit
      004	Tray 1: Paper End Sensor	No paper	Paper remaining
      005	Tray 1: Paper Height Sensor 1	See the table 2 following this table.
      006	Tray 1: Paper Height Sensor 2
      007	Tray 2: Paper Size Sensor	See the table 1 following this table.
      008	Tray 2: Tray Set Sensor	Set	Not set
      009	Tray 2: Paper Lift Sensor	Not upper limit	Upper limit
      010	Tray 2: Paper End Sensor	No paper	Paper remaining

      011	Tray 2: Paper Height Sensor 1	See the table 2 following this table.
      012	Tray 2: Paper Height Sensor 2
      013	Tray 1: Paper Feed Sensor	Paper detected	No paper detected
      014	Tray 2: Paper Feed Sensor	Paper detected	No paper detected
      015	Tray 3: Paper Feed Sensor	Paper detected	No paper detected
      016	Tray 4: Paper Feed Sensor	Paper detected	No paper detected
      017	LCT: Paper Feed Sensor	No paper detected	Paper detected
      018	Relay Sensor 1	Paper detected	No paper detected
      019	Relay Sensor 2	Paper detected	No paper detected
      020	Relay Sensor 3	No paper detected	Paper detected
      021	Relay Sensor 4	No paper detected	Paper detected
      022	Relay Sensor: LCT	No paper detected	Paper detected
      023	By-pass: Paper End Sensor	Not end	Paper end
      024	By-pass: Paper Size Sensor	See the table 3 following this table.
      025	Registration Sensor	Paper detected	No paper detected
      026	Fusing Exit Sensor	No paper detected	Paper detected
      027	Fusing Entrance Sensor	Paper detected	No paper detected
      028	Junction Gate Relay Sensor	Paper detected	No paper detected
      029	Exit Sensor	Paper detected	No paper detected
      030	Paper Overflow Sensor	Not full	Full
      031	Right Cover Open/Close	Close	Open
      032	Duplex Unit Open/Close	Open	Close
      033	Duplex Entrance Sensor	Paper detected	No paper detected
      034	Duplex Exit Sensor	Paper detected	No paper detected

      035	Bank Right Cover Open/Close	Close	Open
      036	Tray Cover Open/Close	Close	Open
      037	LCT Set	Set	Not set
      038	Bridge/Exit Tray: Exit Sensor	Paper detected	No paper detected
      039	Bridge/Exit Tray: Relay Sensor	Paper detected	No paper detected
      040	Bridge/Exit/Shift: Set Detection	Set	Not set
      041	Bridge/Exit Tray: Left Guide Open/Close	Close	Open
      042	Bridge/Exit Tray: Right Guide Open/Close	Close	Open
      043	Transfer Belt Unit HP Sensor	Not HP	HP
      046	Fusing Unit Set	Set (Bit1)	Not set (Bit1)
      047	Toner Overflow Sensor	Not full	Full
      048	Interlock Detection 1	Right or front door is open.	Right or front door is close.
      049	Interlock Detection 2	Right or front door is open.	Right or front door is close.
      050	Key Card Set	Set	Not set
      051	Key Counter Set	Set	Not set
      052	Mechanical Counter Set	Not set	set
      053	1-Bin Unit Set	Set	Not set
      054	1-Bin Unit: Paper Set	Paper detected	No paper detected
      057	Cleaning Web End	Not end	End
      060	Shift Sensor	No paper detected	Paper detected
      064	Shift Tray Sensor	Stay at rear	Stay at front
      065	Bypass Tray Paper Length Detection	Paper detected	No paper detected

      Service Tables

      200	Scanner HP Sensor	Not HP	HP
      201	Platen Cover Sensor	Open	Close

      
      

      Table 1: Paper Height Sensor

      0: Deactivated, 1: Activated (actuator inside sensor)

      
      

      Remaining paper	Paper height sensor 1	Paper height sensor 2
      Full	0	0
      Nearly full	1	0
      Near end	1	1
      Almost empty	0	1

      Table 2: Paper Size Switch

      Service Tables

      Switch 1 is used for the tray set detection. 0: Pushed, 1: Not pushed

      
      

      Models		Switch Location
      North America	Europe/Asia	4	3	2
      11" x 17" SEF*1 (A3 SEF)	A3 SEF*1 (11" x 17" SEF)	0	0	1
      8.5" x 14" SEF *2 (B4 SEF)	B4 SEF *2 (8.5" x 14" SEF)	0	0	0
      A4 SEF	A4 SEF	1	1	0
      8.5" x 11" SEF	8.5" x 11" SEF	1	1	1
      B5 SEF	B5 SEF	0	1	1
      11" x 81/2" LEF*3 (A4 LEF)	A4 LEF*3 (11" x 81/2" LEF)	1	0	0
      10.5" x 7.25" LEF*4 (B5 LEF)	B5 LEF*4 (10.5" x 7.25" LEF)	0	1	0
      A5 LEF	A5 LEF	1	0	1
      *1: The machine detects either 11" x 17" SEF or A3 SEF, depending on the setting of SP 5-181-002 (Tray 1) or -006 (Tray 2). *2: The machine detects either 8.5" x 14" SEF or B4 SEF, depending on the setting of SP 5-181-003 (Tray 1) or -007 (Tray 2). *3: The machine detects either 11" x 81/2" LEF or A4 LEF, depending on the setting of SP 5-181-001 (Tray 1) or -005 (Tray 2). *4: The machine detects either B5 LEF or 10.5" x 7.25" LEF, depending on the setting of SP 5-181-004 (Tray 1) or -008 (Tray 2)..

      Table 3: Paper Size (By-pass Table)

      0: Pushed, 1: Not pushed

      
      

      Models		Bit No.
      North America	Europe/Asia	3	2	1	0
      11" x 17" SEF*1 (11" x 8.5" LEF)	A3 SEF*1 (A4 LEF)	1	1	1	0
      11" x 17" SEF*1 (11" x 8.5" LEF)	A3 SEF*1 (A4 LEF)	1	1	0	0
      8.5" x 11" SEF*1 (8.5" x 11" SEF*2)	A4 SEF*1 (A5 LEF)	1	1	0	1
      8.5" x 11" SEF*1 (8.5" x 11" SEF*2)	A4 SEF*1 (B5 LEF)	1	0	0	1
      5.5" x 8.5" SEF	A5 SEF	1	0	1	1
      5.5" x 8.5" SEF	A5 SEF	0	0	1	1
      5.5" x 8.5" SEF	A6 SEF	0	1	1	1
      5.5" x 8.5" SEF	A6 SEF	1	1	1	1

      
      

      

      • *1: When the machine determines that the paper feed direction is "LEF", it considers that the paper size is bracketed size.

Service Tables

APS Original Size Detection

3000/2000-Sheet (Booklet) Finisher (D636/D637)

Service Tables

< Previous page: Part 8 | You are viewing page: Part 9 | Next page: Part 10 >